LOCKS & LOCK SYSTEMS CAM Lock Drawer Lock - Hardware

LOCKS & LOCK SYSTEMS CAM Lock Drawer Lock - Hardware

LOCKS & LOCK SYSTEMS CAM Lock Application Order Information For drawers, R.H. or L.H. doors with either lipped or flush construction Operation 90°...

2MB Sizes 0 Downloads 8 Views

LOCKS & LOCK SYSTEMS CAM Lock

Application

Order Information

For drawers, R.H. or L.H. doors with either lipped or flush construction

Operation 90° Cam turn – key removable in both locked and unlocked postions

Keying Will key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes)

Packaging Supplied with two keys, trim washer, spur washer for wood and two cams to accommodate construction needs.

Master Keyed x Keyed Different 8053 Nickel 39-180 MASTER KEY Order Number 39-182

All locks flush or lipped mounting, 25 per case. National Part No. 8054-14A 8053-3 8053-14A 8055-14A 8053-14A 8053-14A 8053-14A 8053-14A 8053-14A 8055-14A 8055-14A 8055-14A 8055-14A 8055-14A 8060-14A

Cylinder Max Material Finish Keyed Alike Key No. for Keyed Length Thickness Order No. Keyed Alike Different 15/16” 5/8” Nickel 39-102 413A 39-104 1-3/16” 7/8” Pol Brass 39-106 413A 39-108 1-3/16” 7/8” Nickel 39-110 413A 39-112 1-3/16” 7/8” Nickel 39-118 413A 39-120 1-3/16” 7/8” Nickel 39-200 415A NS 1-3/16” 7/8” Nickel 39-202 390A NS 1-3/16” 7/8” Nickel 39-204 346A NS 1-3/16” 7/8” Nickel 39-206 420A NS 1-3/16” 7/8” Nickel 39-208 642A NS 1-7/16” 1-1/8” Nickel 39-270 415A NS 1-7/16” 1-1/8” Nickel 39-272 390A NS 1-7/16” 1-1/8” Nickel 39-274 346A NS 1-7/16” 1-1/8” Nickel 39-276 420A NS 1-7/16” 1-1/8” Nickel 39-278 642A NS 1-3/4” 1-7/16” Nickel 39-280 413A 39-282

ALL LOCKS ON THIS PAGE CAN BE MASTER KEYED SPECIAL ORDER

Drawer Lock Operation Key removable in both locked and unlocked postions

Keying Will key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes)

Packaging Supplied with two keys and mounting screws

336

MOUNTING HOLE FOR ALL LOCKS

Order Information

Locks use key 413A and are packaged 25/case. National Cylinder Dead Bolt Keyed Alike Keyed Finish Part No. Length Travel Order No. Different 8703-3 15/16” 11/32” Pol Brass 39-122 39-124 8703-14A 15/16” 11/32” Nickel 39-126 39-128 8705-3 1-3/16” 11/32” Pol Brass 39-134 NS 8705-14A 1-3/16” 11/32” Nickel 39-136 39-138

LOCKS & LOCK SYSTEMS Push Lock

C8043

ORDER NUMBERS Bright Brass - KA........ 39-254 Bright Brass - KD........ 39-256 Dull Chrome - KA........ 39-250 Dull Chrome - KD........ 39-252

Features • Push lock for wood sliding doors up to 1” thick • Pushing in cylinder locks doors • Key removable in both locked and unlocked positions KA = Key number 413A

Strike Plates

ORDER NUMBER C7005 3” Straight Cam...... 39-172 ORDER NUMBER Nickel...............39-194

Timberline Accessories ZChange Tool

Required to remove lock plugs in cylinder bodies

16.5mm Drill Bit

Spacer for 5/8” Panel

Drills the proper diameter hole for most cylinder bodies

Allows CAM lock cylinder bodies to be used in 5/8” thick panels

10 mm shank diameter

ORDER NUMBER 39-344

ORDER NUMBER 39-350

ORDER NUMBER 39-340 KY-500

DB-165

SP-300

337

LOCKS & LOCK SYSTEMS Timberline Removable Lock Plug System Complete Key Versatility • In Plant ...furniture can be keyed easily to the customer’s requirements at any time • In Field ...key numbers can be readily changed by your customer

39-402

39-400

39-404

Ease of Finishing • Furniture may be finished without lock plug installed, eliminating need for masking

39-406

39-408

Simplified Inventory Management • One stock of lock plugs fulfills all locking requirements

ANY LOCK PLUG SNAPS INTO CYLINDER BODY Lock Plug + Cylinder Body = Assembled Lock

LOCK PLUGS

39-300 39-302 39-304 39-320

– – – –

LP100 LP500 LP700 LP100

Nickel KA100T Brass KA100T Satin Nickel KA100T Nickel KD

Adjustable Pin Installation Tool Used to install adjustable pins and rotate cylinder bodies ORDER NUMBER 39-342

TL-100

338

Most of the merchandise in this catalog is available in all Hardware Imagination locations. If your selection isn’t available at the store nearest you, we’ll gladly order it from one of the other stores or through special order.

LOCKS & LOCK SYSTEMS Timberline System 100

11/16” min. 1-1/4”

5/32” min.

1/2”

1” min.

ORDER NUMBER Complete Set 39-328*

1-5/8”

16.5 mm dia. hole

Type 100 lockbar clip

Typical Installation Details

Type 100 cylinder body

Lockbar 24” standard or cut to size

Adjustable Pin Lockbar retainer

LOCK PLUGS 39-300 – LP100 Nickel KA100T 39-302 – LP500 Brass KA100T 39-304 – LP700 Satin Nickel KA100T 39-320 – LP100 Nickel KD

* Sold in sets ONLY

Timberline System 150

Typical Installation Details

Features

11/16” min.

ORDER NUMBER

1-1/4”

5/32” min.

Drawer locking clip

Complete Set 39-330*

1/2”

• Full 1/2” lockbar throw • Fits within 1/2” drawer slide clearance • Minimal machining required - hole for lock - groove for lockbar

16.5 mm dia. hole

Lockbar 24” standard or cut to size

Lockbar retainer

Type 150 lockbar clip

Adjustable Pin * Sold in sets ONLY

Type 150 cylinder body

Drawer locking clip

339

LOCKS & LOCK SYSTEMS Disc Tumbler 3 Drawer Gang Lock Cylinder is located near top of pedestal Saddle reverses for mortise application

Application For locking drawers in desk pedestals and other multiple drawer applications. Requires 7/8” dia. hole for cylinder and dado for bar, measuring 7/8” x 1/8” deep on inside of panel.

Operation Key removable in both locked and unlocked postions. Turning the key locks all drawers simultaneously (drawers must be in closed position). Bar moves studs into notch in drawer or slide, thus preventing drawer movement.

Keying Will key together with all other disc tumbler locks using D6785 key blank. See table for available keying. Masterkeying to E41A

Packaging Supplied with two keys, three locking studs, three stud slides, saddle and mounting screws.

ORDER NUMBER Nickel Finish KA-413A................ 39-168 KD......................... 39-170

Metal Hanging File Brackets Description • Reduces manufacturing costs – quick to install • Flexible – can easily be moved to accommodate legal or letter size files • Strong – 16 gauge steel will hold the heaviest files • Attractive – zinc plated finish

Clip 25-410

340

Bar Mount Fits 1/2” material 25-414

Face Mount Fits 1/8” material 25-416

Brackets can be used for side-to-side or front-to-back filing.

Top Mount 25-418

Bar 1/2” X 1/8” X 96” 25-412

LOCKS & LOCK SYSTEMS Security Locks DualAxess by CompX Security Products

- an innovative combination cam lock with key override. DualAxess can be retrofit for existing wood or metal applications to give keyless access and to eliminate keys. The lock can be mounted vertically or horizontally on flush, overlay or lipped/overlay applications. Attach the cam for 90° latching in any direction, based on individual application needs.

*Special Order*

To change the combination, the current combination and a valid key is needed. 10,000 possible combinations - any four digit number - are available. DualAxess by CompX can be operated using either a combination or a key. Once unlocked, rotate the housing 90° clockwise to unlatch.

Unlock using combination: .. Factory set combination is 0-0-0-0.

Unlock using key:

.. Turn wheels until correct combination appears in the combination windows.

.. Insert key into lock plug; rotate key 90° clockwise.

.. Press button, rotate housing to unlatch.

.. Important: Rotate key 90° counterclockwise to lock.

.. Scramble wheels to lock.

.. Rotate housing to unlatch.

341

LOCKS & LOCK SYSTEMS Security Locks WIRELESS or ETHERNET READY Access Control Features:

SOFTWARE

• Easy Installation On Existing Or New Cabinets • 3,000 User/Supervisor Codes

• Four Modes Of Access: Keypad, Proximity Card* Hid Or Iclass Hid, * Magstripe Card* (Track Use to Existing Cards LockView 4 is2)easy use, Identification with many programmable options, and allows access to any eLock

from any computer on the network.

• Motor-Driven Latching Mechanism Provides The Convenience Of Automatic Relocking • Elock Is Capable Of Operating Two Latches Or Doors ® Batteries Or Dedicated Power Supply • OperatesLockView On 6 Aa Alkaline software features:

• Low Battery Indicator w Provides a comprehensive audit trail of the last

*Special Order*

15,000 access attempts; including date, time and

• “Jump Start” 9-Volt Battery Power Port Allows The User, With A Valid userToname Credential, Access The Compx Elock® When The Batteries Are Exhausted w Escalating notification system sends alerts via

email; optional Short Message Service provides

• Programming Can Be Done Manually On User-Friendly Lcd Blue Backlit TextThrough Message,Lockview® Voice Messaging or Fax alerts Screen Or Software

w Complies with Joint Commission standards

• Compatible With 12-Volt Electric Door Strikes To Control Access On Interior and is 21 CFR Part 11 compliant Doors

w Compliance Dashboard provides at-a-glance status

• Optional of Door Switchon Provides Instant Notification Of Unauthorized Entry Or all eLocks the network Door Ajar Alerts

w LockView enables updates via the network to any

Network features: eLock on the system. Updates can include:

— User changes / Delete / Modifycommunication Credentials) • Utilizes 802.11g wireless(Add protocol or Ethernet on existing networks — eLock Changes (Add / Delete / Modify eLocks)

• Enables — two-way Accesscommunication Rights changes via common security encryption methods: WEP 64-key, WEP 128-key, WPA-PSK (TKIP), WPA2PSK (AES) and other enterprise-class wireless security

® System Requirements Minimum Lockview MSSQL Software Server 2005 Features: or MSSQL Server Express,

memory, 2GB space on hard disk, andAttempts; Including Date, Time And User Name • Provides A 2GB Comprehensive Audit free Trail Of The Last 15,000 Access

, VISTA,Sends or 7.Alerts OtherViaconfigurations • Escalating Windows NotificationXP System Email; Optionalare Short Message Service Provides Text Message, Voice Messaging Or Fax Alerts acceptable; please consult factory for detailed information.

• Complies With Joint Commission Standards And Is 21 Cfr Part 11 Compliant • Compliance Dashboard Provides At-A-Glance Status Of All Elocks On The Network • Lockview Enables Updates Via The Network To Any Elock On The System. UPdates Can Include: • User Changes (Add / Delete / Modify Credentials) • Elock Changes (Add / Delete / Modify Elocks) • Access Rights Changes

Network cabinet eLock has three components:

Minimum System Requirements Mssql Server 2005 Or Mssql Server Express, 2gb Memory, 2gb Free Space On Hard Disk, And Windows Xp, Vista, Or 7. Other Configurations Are Acceptable; Please Consult Factory For Detailed Information.

Controller

Motorized gear-driven latch

Battery compartment

Interior mount

Exterior mount

342 Reorder #: F2644-029

For more information, call 847.752.2500

LOCKS & LOCK SYSTEMS 1-1/4”

File Frame Facts

RECOMMENDED MINIMUM FILE TAB CLEARANCE

FOUR SIDED DRAWER

LETTER FILES

LEGAL FILES

12-1/8” to 12-3/16”

15-1/8” to 15-3/16” 3/4”

8-3/4”

PROFILE HEIGHT

3/4”

Recommended INSIDE DRAWER 8-3/4” HEIGHT

14-13/16” to 16-3/16”

11-3/16” to 13-3/16”

THREE SIDED DRAWER

FILE FRAME SYSTEM CAN PROVIDE PERFECT FILING WITHIN THESE DIMENSIONS

File Frame Systems – Typical Configurations WIDE AND DEEP FILE DRAWER

FILE DRAWER

WIDE FILE DRAWER

LATERAL FILE DRAWER

LATERAL FILE DRAWER WITH SIDE TO SIDE FILING

File Frame Systems – Special Applications

METAL DRAWER – LETTER WIDTH FILES

METAL DRAWER – LEGAL WIDTH FILES

CUT-TO-SIZE KITS

FITS DRAWERS WITH INSIDE DEPTH LESS THAN 23”

PLAIN DRAWER SYSTEMS

KITS SUPPLIED WITH THE COMPONENTS NEEDED TO OFFER FRONT-TO-BACK AND SIDE-TO-SIDE FILING

ORDER NUMBER LETTER OR LEGAL FILING

Letter width files...... 39-290 Legal width files...... 39-292

343

LOCKS & LOCK SYSTEMS Glass Door Locks

Bore Through Style Locks FINISH CAP IS ATTACHED TO GIVE FINISHED APPEARANCE

TYPE 300 SERIES – Horizontal Mount

ORDER NUMBERS Nickel Finish 39-306

7/8” DIAMETER HOLE BORED IN GLASS CENTERED 7/8” FROM EDGE

CAM MUST ROTATE COUNTERCLOCKWISE TO LOCK

NUT WASHER IS HAND TIGHTENED TO FASTEN CYLINDER BODY TO GLASS

Brass Finish 39-308

1-5/8”

Features • For swing style doors • Glass doors up to 3/8” thick

1-1/4” 15/16”

3/16”

Satin Nickel Finish 39-310

1-3/16”

LOCK PLUGS 39-300 – LP100 Nickel KA100T 39-302 – LP500 Brass KA100T 39-304 – LP700 Satin Nickel KA100T 39-320 – LP100 Nickel KD

Compression Mount Style Locks

TYPE 350 SERIES – Horizontal Mount 1-5/8” 5/16” 7/16” 1-3/16”

Nickel Finish 39-294

1-1/8”

Ø 7/8”

NO BORING REQUIRED

1/2”

Features • Fully cushioned to avoid glass damage • Glass doors 1/4” to 5/16” thick

LOCK SLIPS Into EDGE OF GLASS DOOR AT ANY LOCATION

Brass Finish 39-296

Satin Nickel Finish 39-298

Glass Cylinder Lock

Features • Chrome on brass cylinder • Key works as Knob in unlocked position • Angle of locked & unlocked is 90° • Setting hole diameter: 18.5 mm (23/32”) • Maximum door thickness: ORDER NUMBERS 7mm (9/32”) Polished stainless steel front plate....... 39-176 Polished brass front plate................... 39-178 MP

LA

344

Casters Casters

SOLD PER PIECE

SOLD PER PIECE

Features • Dual wheel hooded caster • 2” diameter wheels • Rated 45 lbs. per caster • Plate included ORDER NUMBERS Black / locking........... 23-128 Brass / Black.............. 23-130 Chrome / Black.......... 23-132 Black Texture............. 23-134

Features • 75mm non-hooded black twin-wheel caster • Locks in place • 65mm x 55mm top plate • Polyurethane wheels and brakes • 135 lb. load capacity per caster

SOLD PER PIECE

ORDER NUMBER................ 23-158

Features • Single, 4” x 7/8”, rubber wheel • Rigid – non-swivel caster • Overall height 4-3/4” • 2-3/4” x 3-3/4” top plate • 150 lb. load capacity per caster

ORDER NUMBER................ 23-160

Features • Hooded ball for more decorative applications • Non-marking PVC ball • 100 lb. capacity per caster • Wheel size 2” – total height 2-5/8” • Standard top plate 1-3/16” x 2” ORDER NUMBERS

Polished Brass.......... 23-120 Polished Chrome....... 23-122

Features • 75mm non-hooded black twin-wheel caster • 1-1/2” square top plate • 135 lb. load capacity per caster

SOLD PER PIECE

ORDER NUMBER................ 23-156

SOLD PER PIECE

Features • Single, 5” x 1-1/4”, rubber wheel • Locking swivel caster • Overall height 6” • Swivel Radius 3-5/8” • 3-1/8” x 4-3/16” top plate • 300 lb. load capacity per caster

SOLD PER PIECE

ORDER NUMBER................ 23-162

345

CATCHES, LATCHES & BRACKETS

Catches & Latches Flexa Touch® Drawer Touch Latch This unique drawer opener works like a ball point pen. Press forward about 1/8” and it springs open. Excellent for large or small drawers. Aproximate 2-1/2” clearance is required behind drawer.

Mounted through back of drawer

Order number......... 17-122

Mounted on back of drawer

Magnetic Catch

White........................ 17-112 Black (not shown)...... 17-152 5 sets per pack

• • • • • •

Strong, permanent magnet 40 mm hole C/C Floating head Comes with strike plate Adjustable holes 8 lb. Pulling capacity

Rotary Catch

Rustproof catch ideal for bathroom and kitchen cabinets.

White........................ 17-156 Brown (not shown). ... 17-158

346

• Made of resin - rustproof • Proven in tests to last... more than 300,000 times • Catch & Strike made of polyacetal (natural white) • Rollers made of polyethylene (natural white) • Packaged: 5 sets

CATCHES, LATCHES & BRACKETS K-Catch

Super Strong Nylon Catch

Order number......... 19-250 5 sets per pack

Super 88 Magnetic Catch

16 21

36

2

4¥8

27 25

3

4

1

46 (1-13/16") 28

1.6 16

• Magnetic force = 1.5kg (3.3 lbs.) • Weight = 28.5g • Box = 24 pcs. • Carton = 720 boxes

Order number......... 17-114

15 (19/32")

1

f4.2, f6

• Material: Catch housing - aluminum Strike - Steel • Finish: Strike - clear zinc chromate • Screws not included

SP Series Magnetic Catch SP single plate........ 17-116

• Material: Catch Housing – Polyamide Strike – 430 Stainless Steel • Finish: White

Screws not included

ML-80 Series Magnetic Touch Latch ML-80 Brown........... 17-154 ML-80 Black............ 17-155 ML-80 White............ 17-164 • Magnetic Force: 1.6kg (3.5 lbs) • Pakaged: 20 pcs. per box 400 pcs. per carton • Material: body – ABS Plastic latch – Steel counterplate – Steel • Finish: body – white, brown or black latch – Yellow Zinc Chromate counterplate – Yellow Zinc Chromate

347

CATCHES, LATCHES & BRACKETS

Catches & Bolts EPCO Solid Brass Double Roller Ball Catch

EPCO Elbo Catch

1-3/4”............17-136 2-3/8”............17-138 Brite Chrome................... 17-128 Polished Brass............... 17-134

Packaged 5 pieces KV Bullet Catch

Parker Polished Chrome Barrel Bolt

2-1/2” Long Chrome on Brass Barrel Bolt Order number................. 17-118 Brite Chrome................... 17-130 Packaged 1 piece Stainless Steel Barrel Bolt

• Finish: Body - satin Shoot - brass nickel plated • Supplied with stainless wood screws Order number 55-104

348

CATCHES, LATCHES & BRACKETS

Latches Mini Touch Latch

• • • • •

Order number......... 17-104

Mini latch Stike included Material: Steel/Plastic Packaged 1 set White

Single Magnetic Touch Latch • Suitable for glass or wood doors • Material: plastic

Brown...................... 17-146 White........................ 17-144 Black........................ 17-148 Double Magnetic Touch Latch • Double touch latch for two doors • Material: plastic

Brown...................... 17-124 White........................ 17-126 Black........................ 17-150 RV & Boat Touch Latch

A simple push is all it takes to open or close a door.

Order number......... 17-210

349

CATCHES, LATCHES & BRACKETS

Brackets Workstation Bracket Features: • 45° cut-out allows for use with up to 1-3/8” x 1/3/8’ wall cleats • 1/8” powder coated steel Suggested Uses:

• 1,000 lb. load capacity

• Computer workstations

• Sold per pair: 1-left, 1-right

• Handicap counter tops • Wall workbench tops • Any application that requires strong, rigid support

White (18” x 24”)...............43-434 Black (18” x 24”)................43-436 White (24” x 29”)...............43-438 Black (24” x 29”)................43-440

Heavy Duty Bracket

Suggested Uses:

Features:

• Counter tops

• 5mm steel

• Work surfaces

• Epoxy coated

• Book shelves

• Sold per piece

• Closet shelves

White (11-1/2” x 8-1/2”)........ 27-500 Black (11-1/2” x 8-1/2”)........ 27-502 White (15-1/2” x 10-1/2”)...... 27-504 Black (15-1/2” x 10-1/2”)...... 27-506 White (19-1/2” x 13”)............ 27-508 Black (19-1/2” x 13”)............ 27-510

350

CATCHES, LATCHES & BRACKETS

Folding Brackets • Heavy Duty Stainless Steel • Type 304 Electro-Polished • Sold Individually LOAD CAPACITY 300 LBS.

LOAD CAPACITY 600 LBS.

Order number.............. 27-296

DIM A B C

• • • •

INCHES 6 5/8” 12 1/8” 7/8”

80 Lbs. Capacity Per Set Blister Packed All Hardware Supplied Sold In Pairs

Order number.............. 27-294

351

CATCHES, LATCHES & BRACKETS

Wall Standards & Shelf Brackets

Shelf Bracket 6”................27-316 8”................27-318 10”..............27-320 12”..............27-322 14”..............27-324 16”..............27-326 18”..............27-328

Shelf Bracket 12”..............27-342 14”..............27-344 16”..............27-346 18”..............27-347 20”..............27-349

Shelf Bracket 12”..............27-356 14”..............27-358 16”..............27-360 18”..............27-362 20”..............27-364

352

Wall Standard 24”..............27-302 36”..............27-304 48”..............27-306 60”..............27-308 72”..............27-310 96”..............27-312

Heavy Duty Wall Standard 24”..............27-330 36”..............27-332 48”..............27-334 60”..............27-336 72”..............27-338 96”..............27-340

Double Track Wall Standard 24”..............27-348 36”..............27-350 72”..............27-352 96”..............27-354

CATCHES, LATCHES & BRACKETS

Shelf Clips Nickel Plated Glass Retainer Shelf Clip 2

8

Works With 3/16” Or 1/4” Glass

Ø5

Order number 5 mm........ 27-208

26 Ø6 9

11

Metal Spoon Clip

1/4” ‘L’ Shelf Clip

1/4” clip may be used with 27-192 or 27-194 clip sockets Packaged 100 pieces Order number 5mm Bright Brass........27-168 5mm Bright Nickel........27-170 1/4” Bright Brass..........27-212 1/4” Bright Nickel.........27-214

Order number Polished Chrome.......27-226 Polished Brass..........27-238

Metal 1/4” Shelf Clip Socket

5 mm Shelf Clip with Steel Pin

Requires a 9/32” boring Can be used with 1/4” stem shelf clips Order number Polished Chrome.......27-194 Polished Brass..........27-192 Wood Shelf Retainer Clip

Order number Clear......... 27-228 White........ 27-232

5mm Econo Shelf Clip

The Parrot Shelf Clip

Order number 27-240

Order number Glass shelves...... 27-148 Wood shelves...... 27-150

• White Plastic • Ridges allow 5/8” + or – 1/16” shelf to work properly • Clips for 1/2” or 3/4” shelves • Other colors by special order • Packaged 100 pcs

Order number 5 mm........ 27-164 1/4”........... 27-166

353

CATCHES, LATCHES & BRACKETS

Fastening Fittings

4.5

2

Hanger Fittings

40 (1-37/64")

16.2 (41/64")

8.2

31

Order number 19-194

f4

• Made of steel • Finish: bright zinc chromate • Packaged 5 pieces

Key Lock Fitting • Made of steel • Finish: bright zinc chromate • Packaged 5 pieces

f4

32

f4

33 45 (1-25/32")

76 (3") 32

16.5 (21/32") 2 4

15 (19/32")

wood screw f 4.5(W) f 4.1(S)

354

4 8

Order number 19-198

2 4

Most of the merchandise in this catalog is available in all Hardware Imagination locations. If your selection isn’t available at the store nearest you, we’ll gladly order it from one of the other stores or through special order.