OLPF Frame Installation Instructions - CVP.com

OLPF Frame Installation Instructions - CVP.com

OLPF FRAME I N S TA L L AT I O N I N S T R U C T I O N S EPIC MYSTERIUM-X | SCARLET MYSTERIUM-X RED.COM O L P F F R A M E I N S TA L L AT I O N I...

1MB Sizes 1 Downloads 7 Views

OLPF FRAME

I N S TA L L AT I O N I N S T R U C T I O N S

EPIC MYSTERIUM-X | SCARLET MYSTERIUM-X

RED.COM

O L P F F R A M E I N S TA L L AT I O N I N S T R U C T I O N S TABLE OF CONTENTS Disclaimer3 Copyright Notice 3 Trademark Disclaimer 3 Chapter 1: OLPF Frame Introduction 4 OLPF Frame Upgrade Kit Components 4 Required Tool 4 Additional Resources 4 Chapter 2: Install the OLPF Frame 5

COPYRIGHT © 2015 RED.COM, INC

930-0011, REV-C |

2

O L P F F R A M E I N S TA L L AT I O N I N S T R U C T I O N S DISCLAIMER

RED has made every effort to provide clear and accurate information in this document, which is provided solely for the user’s information. While thought to be accurate, the information in this document is provided strictly “as is” and RED will not be held responsible for issues arising from typographical errors or user’s interpretation of the language used herein that is different from that intended by RED. All safety and general information is subject to change as a result of changes in local, federal or other applicable laws. RED reserves the right to revise this document and make changes from time to time in the content without obligation to notify any person of such revisions or changes. In no event shall RED, its employees or authorized agents be liable to you for any damages or losses, direct or indirect, arising from the use of any technical or operational information contained in this document. For comments or questions about content in this document, please send a detailed email to [email protected]

COPYRIGHT © 2015 RED.COM, INC

COPYRIGHT NOTICE

COPYRIGHT© 2015 RED.COM, INC. All trademarks, trade names, logos, icons, images, written material, code, and product names used in association with the accompanying product are the copyrights, trademarks, or other intellectual property owned and controlled exclusively by RED.COM, INC. Torx is a registered trademark of Textron, Inc. Leica is a registered trademark of Leica Microsystems. Nikkor is a registered trademark of Nikon Corporation. Canon is a registered trademark of Canon, U.S.A.

TRADEMARK DISCLAIMER

All other company, brand, and product names are trademarks or registered trademarks of their respective holders. RED has no affiliation to, is not associated with or sponsored by, and has no express rights in third-party trademarks.

930-0011, REV-C |

3

O L P F F R A M E I N S TA L L AT I O N I N S T R U C T I O N S

01

OLPF FRAME INTRODUCTION

If you are using an EPIC MYSTERIUM-X ® or SCARLET MYSTERIUM-X ® camera, you need to install a new OLPF frame (included with the DSMC AL Leica-M Mount). Leica-M ® lenses are incompatible with older models of the OLPF frame originally installed in the EPIC MYSTERIUM-X and SCARLET MYSTERIUM-X. Your warranty will not be void if you install the OLPF frame according to these instructions. If you want RED to perform the installation of the OLPF frame for you, RED will do so free of charge. Please contact your Bomb Squad representative for complete details. WARNING: This procedure is ONLY applicable to EPIC MYSTERIUM-X and SCARLET MYSTERIUM-X cameras. CAUTION: Use extreme care to ensure that no tools come into contact with the OLPF.

OLPF FRAME UPGRADE KIT COMPONENTS

The DSMC AL Leica-M Mount includes the following OLPF frame upgrade kit items:   OLPF frame   Four (4) M4x0.7 X 8 mm lens mount screws   T20 Torx ® driver   T6 Torx driver

REQUIRED TOOL

The following tool is not included in the upgrade kit, but it is required to properly perform this upgrade:   ESD-safe plastic tweezers

ADDITIONAL RESOURCES

The following resources offer additional information about RED, the DSMC system, and the RED community:   RED.com: Check the official RED website for the latest information about RED products.   RED Learn Articles: RED offers in-depth technical articles about RED cameras, post-production, and digital cinematography.   RED.com/downloads: Go to the RED Downloads page to download the latest firmware, operation guides, and post-production software.   DSMC Toolkit: Go to the RED Downloads page to find the DSMC Toolkit, which offers many helpful tools and resources to customize and improve your DSMC workflow.   Support.red.com: Check the RED SUPPORT site for FAQs, or to file a support ticket.   Bomb Squad Support: For more information, contact your Bomb Squad representative.   In-Camera Help: Select the Help button on an in-camera screen to open up the help for that screen.   Reduser.net: Discuss all things RED on the REDUSER third-party forum.

COPYRIGHT © 2015 RED.COM, INC

930-0011, REV-C |

4

O L P F F R A M E I N S TA L L AT I O N I N S T R U C T I O N S

02

INSTALL THE OLPF FRAME

WARNING: This procedure is ONLY applicable to EPIC MYSTERIUM-X and SCARLET MYSTERIUM-X cameras. WARNING: DO NOT allow any dirt or debris to enter the optical cavity. 1. Turn off the BRAIN. 2. Remove the lens, and any DSMC modules, cables, or other accessories that might interfere with removing the lens mount. 3. Loosen and remove the four (4) M4x0.7 x 8 mm lens mount screws in a cross pattern (“X” pattern) using a T20 Torx driver. NOTE: Screw removal may require a large handle T20 Torx driver and additional leverage. 4. Remove the lens mount.

Remove Lens Mount 5. Use a damp, lint-free cloth to gently wipe down the area around the lens mount and OLPF module. Remove as much dust and debris as possible.

COPYRIGHT © 2015 RED.COM, INC

930-0011, REV-C |

5

O L P F F R A M E I N S TA L L AT I O N I N S T R U C T I O N S 6. Remove the old OLPF frame. A. Remove the tamper seals with ESD-safe plastic tweezers.

Remove Tamper Seals B. Remove the four (4) M2x0.4 x 4 mm OLPF frame screws (P/N 600-0224) in a cross pattern (“X” pattern) using a T6 Torx driver. C. Remove the OLPF frame with the tip of the Torx wrench.

Remove the OLPF Frame 7. Install the new OLPF frame. A. Insert the OLPF frame into the optical cavity with the lip on the outer rubber frame and press lightly downward to seat. B. Insert and loosely tighten the four (4) M2x0.4 X 4 mm OLPF module screws (P/N 600-0224) in a cross pattern (“X” pattern) using a T6 Torx driver. DO NOT FULLY TIGHTEN. 8. Replace the lens mount. A. Replace and loosely tighten the four (4) M4x0.7 x 8 mm lens mount screws in a cross pattern (“X” pattern) using a T20 Torx driver. DO NOT FULLY TIGHTEN. B. Fully tighten the four (4) lens mount screws in a cross pattern (“X” pattern) using a T20 Torx driver. DO NOT exceed 350 in-oz, or damage may occur. WARNING: DO NOT OVERTIGHTEN.

COPYRIGHT © 2015 RED.COM, INC

930-0011, REV-C |

6

RED DIGITAL CINEMA COPYRIGHT© 2015 RED.COM, INC. All trademarks, trade names, logos, icons, images, written material, code and product names used in association with the accompanying product are the copyrights, trademarks or other intellectual property owned and controlled exclusively by RED.COM, INC.