tech international - Anwa - Tech

tech international - Anwa - Tech

TIRE REPAIR CATALOG www.techtirerepairs.com TRUST TECH The World Leader in Tire Repair TECH INTERNATIONAL Table of Contents TIRE REPAIR PRODUCTS &...

17MB Sizes 1 Downloads 30 Views

Recommend Documents

TECH 3343 - EBU Tech
Guidelines for Production of Programmes in accordance with R 128. Tech 3343-2016. 4. Page intentionally left blank. This

South Tech North Tech Met Center - Applied Tech
Manufacturing. Construction. Automotive www.appliedtech—stl.com. Career and Technical Education. Serving St. Louis Ove

disruptive french tech - Business France Tech
Mar 13, 2016 - Xavier Niel managed to build a telecommunication and internet empire with his company Iliad which is valu

tech in fifth position - The Tech (MIT)
hurdles when Hank Steinbrenner, af-. (Continued on Page '3). CALENDAR. Monday, May 25. 20-Meeting of Naval:.'httreScty;

High-Tech- Mobilhacker High-Tech- Mobilhacker
Kunde: Friedrich Multerer. □ Kunde: Richard Resch. □ Kunde: Robert Grebenz. □ Kunde: Agama a. s.. □ Kunde: Pendl

Zidell + Hi-Tech = Zy-Tech Zidell + Hi-Tech = Zy-Tech - Valve World
our holding company, PON Holdings BV, bought Zidell Valve Corporation in March. 1997, one condition of sale was that we

Low-Tech | No-Tech - zu SWKI
Struktur: Bürogebäude 2226, Lustenau. — Architekten: Baumschlager Eberle, Sabrina Contratto. — Fachplaner: T.A.U.

French Tech Visa - La French Tech
Jun 15, 2017 - France wants to bring about a new generation of world-leading companies .... applying for a visa and resi

Arkansas Tech Writing - Arkansas Tech University
Jun 2, 2009 - Arkansas. Tech. Writing. English 2053: Technical Writing. 12th edition edited by. Carl Brucker. Arkansas T

Tech Nation 2016 - Tech City UK
digital tech businesses are outside London. 2.8x. 32%. Tech City UK, Nesta, ABS, 2015. 1. Digital Tech Industries' GVA a

TIRE REPAIR CATALOG www.techtirerepairs.com

TRUST TECH The World Leader in Tire Repair

TECH INTERNATIONAL

Table of Contents TIRE REPAIR PRODUCTS & REPAIR CHARTS

Pages 3 – 25

Uni-Seal Ultra Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4 Uni-Seal 2-piece Stems & Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 – 7 Centech Radial Repairs for Shoulder Injuries . . . . . . . . . . . . . . . . . . . . . . . . 6 Radial Section Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 10 Bias Ply Tire Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 – 13 Radial OTR Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 – 18 Tech Off Road (TOR) Bias Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 – 21 Repair Rubber and Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 24 2-Way Tube Repairs & All-Purpose Repairs. . . . . . . . . . . . . . . . . . . . . . . . . 25 NAILHOLE INSERTS & REPAIR KITS

Pages 26 – 28

Permacure Repairs & Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Flow-Seal Inserts & Self-Vulcanizing Repairs . . . . . . . . . . . . . . . . . . . . . . . 27 Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 CABINETS & REPAIR TOOLS

Pages 29 – 31, 113

Cabinets & Tool Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Hand Tools and Knives, Extruder Guns & Branding Irons . . . . . . . . . . 30 – 31 Regroovers, Blades & Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 PRODUCT PAGES

Pages 32 – 33

Tire Inspection & Marking Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 – 33 Anti-Seize Compound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 SAFETY, PROTECTION & HAND CLEANING PRODUCTS AIR TOOLS & ACCESSORIES

Page 34 Pages 35 – 41

Drills, Buffers & Air Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Cutters, Burrs, Grinding Stones, Wheels & Rasps . . . . . . . . . . . . . 36 – 39, 41 Wire Brushes, Buffing Stones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Gouges & Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

Pages 42 – 47

TIRE & WHEEL SERVICE LUBRICANTS

Pages 48 – 49

TIRE IDENTIFICATION

Page 50

Radio Frequency Identification Data Tags (RFID) . . . . . . . . . . . . . . . . . . . . 50 Tire Identification Logos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 TIRE SPREADERS

Page 51

Tech International Tire Repair Catalog

TIRE BALANCING & SEALANT PRODUCTS

Pages 52 – 53

Balance Pads, Tools & Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Balancing Compound & Tire Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 TPMS SOLUTIONS

Pages 54 – 57

VALVES & VALVE HARDWARE

Pages 58 – 73

AIR SERVICE PRODUCTS

Pages 74 – 78

Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Automatic Tire Inflators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Chucks & Chuck Repair Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Air Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 IMPACT WRENCHES & SOCKETS

Pages 79 – 84

WHEEL SERVICE PRODUCTS

Pages 85 – 87

Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Stud Cleaners , Nut Wrenches & Wheel Protectors . . . . . . . . . . . . . . . 86 – 87 TIRE & RIM SERVICE PRODUCTS

Pages 88 – 98

OTR Bead Breakers & Tire Service Products. . . . . . . . . . . . . . . . . . . . 88 – 89 Ken-Tool Tire & Rim Service Products . . . . . . . . . . . . . . . . . . . . . . . . . 90 – 93 Gaither Tire Inflation & Tire Changing Products . . . . . . . . . . . . . . . . 94, 95, 98 Jacks & Lifting Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 – 97 WHEEL WEIGHTS, KITS & TOOLS AUTOMOTIVE SERVICE PRODUCTS

Pages 99 – 105 Pages 106 – 112

Tire Changer Products & Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . 106 – 108 Wheel Balancer Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Brake Lathe Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 – 110 Lift Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Lug Nuts, Cable Ties & Spare Tire Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 PRODUCT INDEX

Pages 114 – 119

TRAINING MATERIALS & INFORMATION

Pages 120 – 122

SPECIAL ORDER ITEMS MAY REQUIRE A MINIMUM ORDER AMOUNT.

Chart Directory Headquartered in Johnstown, Ohio and founded in 1939, Tech International is the world’s leading producer of tire and tube repairs and wheel service solutions. Today, Tech markets products into more than 110 countries throughout the world. In addition to its own line of quality products, Tech offers a vast selection of tools, service items and equipment from industry-leading manufacturers. The company is recognized as one of the top exporters in the United States and has received numerous export awards from the U.S. Chamber of Commerce, and the Ohio Department of Commerce. Tech has also been honored by receiving both the U.S. Presidential “E-Star” Awards for excellence in exporting.

REPAIR CHARTS

Page

AX Aramid Reinforced Radial OTR Repair Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Bias 2-Piece Nail Hole Repair Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BP Bias Repair Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Centech & Thermacure Radial Repair Charts . . . . . . . . . . . . . . . . . . . . . . . 10 Centech Aramid Reinforced Radial OTR Repair Charts . . . . . . . . . . . . . . . 15 Centech OTR Repair Recommendations - Chemical, Thermacure, Cloth Backed and Heat Cure . . . . . . . . . . . . . . . . . . . . . . . . . 14 OTR Vulcanizing System Radial/Bias Ply Application Chart . . . . . . . . . . . . 43 Radial 2-piece Nail Hole Repair Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tech AX Severe Service Radial Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Tech Bias Skidder Tire Repair Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Tech Off Road (TOR) & Bias Skidder Repair Chart . . . . . . . . . . . . . . . . . . . 21 Tech Off Road (TOR) Bias OTR Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Tech Radial OTR Repair Chart Centech Aramid Reinforced Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Tech Uni-Seal Ultra, Uni-Seal Ultra Max & Bias Uni-Seal Repair Limitations Chart for Radial and Bias Crown Injuries . . . . . . . . . . . . . 4

TECH Uni-Seal Ultra Repairs TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires. Tech Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Endurance Test. These repairs meet or exceed international tire industry guidelines for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with Tech's thick chemical cushion gum. The 290UL (UL10N) is an excellent repair for self-sealing truck tires produced with sealant beneath the inner liner. Refer to Tech How-To-Repair Manual RM-4 or Repair Video RDVD1 for installation procedures and limitations.

Proper tire repair.

Improper tire repair. 290UL

S1040

S1043

Cat. No. 249UL 250UL 250UL/24 251UL 251UL/24 290UL

250UL

270P

270

249UL 269

UNI-SEAL ULTRA REPAIRS FOR RADIAL AND BIAS TIRES

269 270 270P S1041 271

251UL

271 271/38 S1043 S1040 S1041 911

Prepared Description Injury Size UL3 UNI-SEAL ULTRA 3mm, 1/8” UL6 UNI-SEAL ULTRA 6mm, ¼” UL6 UNI-SEAL ULTRA 6mm, ¼” UL8 UNI-SEAL ULTRA 8mm, 5/16” UL8 UNI-SEAL ULTRA 8mm, 5/16” UL10N NON-FABRIC-REINFORCED 10mm, 3/8” UNI-SEAL ULTRA CC3 CARBIDE CUTTER 3mm, 1/8” CC6 CARBIDE CUTTER 6mm, ¼” CC6P CARBIDE CUTTER 6mm, ¼” for passenger tires CC8 CARBIDE CUTTER 8mm, 5/16” CC10 CARBIDE CUTTER 10mm, 3/8” QUICK CHANGE ADAPTOR for CC3 QUICK CHANGE ADAPTOR for CC6, CC6P QUICK CHANGE ADAPTOR for CC8 2mm ALLEN WRENCH for small QC adaptors

Box Qty. 24 14 24 14 24 10 1 1 1 1 1 1 1 1 1

TECH Uni-Seal Ultra Max Repairs Tech Uni-Seal Ultra Max one-piece repair units provide a simple, quick, and safe method to properly repair commercial truck tires, agricultural tires, industrial and small OTR tires. Tech Uni-Seal Ultra Max repairs are produced with cross-weave reinforcement for radial or bias tires, a lead wire molded in the stem for quick installation, and Tech's thick chemical cushion gum on the stem and cap for permanent vulcanization to the tire. These repairs meet or exceed international tire industry guidelines for proper puncture repair.

UNI-SEAL ULTRA MAX REPAIRS FOR RADIAL AND BIAS TIRES

291UL S1041/38

271/38

292UL 272

TRT105

Cat. No. 291UL 292UL 271/38 272 S1041/38 912

Prepared Description Injury Size UL10 UNI-SEAL ULTRA MAX 10mm, 3/8” UL13 UNI-SEAL ULTRA MAX 13mm, ½” CC10 CARBIDE CUTTER 10mm, 3/8” CC13 CARBIDE CUTTER 13mm, ½” QUICK CHANGE ADAPTOR for CC10 & CC13 3mm ALLEN WRENCH for S1041/38 QC adaptor (not shown)

Box Qty. 10 10 1 1 1 1

3

Tech Bias Uni-Seals provide a simple, safe, permanent method to properly repair ½”, 13mm and ¾”, 20mm injuries in bias truck, agricultural, industrial and small OTR tires. The oversized stem fills the injury while the fabric reinforced cap restores the integrity to the tire. Both the stem and cap permanently vulcanize to the tire with Tech's thick chemical cushion gum.

TIRE REPAIR PRODUCTS & REPAIR CHARTS

TECH Uni-Seal Repairs for Bias Tires

UNI-SEAL BIAS REPAIRS Cat. No. 252 253 262 253

Description BIAS UNI-SEAL BIAS UNI-SEAL 14 ply rated BIAS CUTTER

Prepared Injury Size 13mm, ½” 20mm, ¾” 13mm, ½”

Box Qty. 6 6 1

252

262

RADIAL TIRE

BIAS TIRE CROWN AREA

T

T

T

CROWN AREA*

T

TECH Uni-Seal Ultra, Uni-Seal Ultra Max & Bias Uni-Seal Repair Limitations Chart Angles greater than 25° require a 2 piece repair system to be used. *Radial tire crown area begins 1” (25mm) from tread edge on passenger tires, or 1½” (40mm) on all truck and ag. tires.

RADIAL AND BIAS CROWN INJURIES

4

Prepared Crown Injury Size

H, V, Z Rated & Run Flat Tires (limit 1)

T Rated Tires & Below

3mm

UL3

UL3

6mm

UL6

UL6

Light Truck Tires

Medium & Heavy Truck Tires

Ag, Industrial & Small OTR Tires

REPAIRS MUST NOT OVERLAP!

REPAIRS MUST NOT BE IN THE SAME BODY PLY!

UL6

UL6

8mm

UL8

UL8

10mm

UL10

UL10

UL10

13mm

UL13

UL13

UL13

TECH Uni-Seal Ultra Stems for 2-Piece Repair

CC6 (270)

ULS6 (250-1UL)

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech Uni-Seal Ultra stems feature a lead wire for quick easy installation in prepared tire injuries. Each stem is wrapped with Tech's thick chemical cushion gum which permanently fills, seals, and vulcanizes to the tire. The photo (right) shows a 6mm (1/4”) prepared injury and the same size injury filled with a ULS6 Uni-Seal Ultra Stem. These stems must be used in conjunction with the appropriate repair unit on the inside of the tire. Refer to repair charts on page 7.

UNI-SEAL ULTRA STEMS FOR 2-PIECE REPAIR

Cat. No. 250-1UL 251-1UL 291-1UL 270 270P 250-1UL 291-1UL

251-1UL

271 271/38 S1040 S1041 S1041/38 911 912

TECH Uni-Seal Stems for Large 2-Piece Repair

Prepared Description Injury Size ULS6 UNI-SEAL ULTRA STEM 6mm, ¼” ULS8 UNI-SEAL ULTRA STEM 8mm, 5/16” ULS10 UNI-SEAL ULTRA STEM 10mm, 3/8” CC6 CARBIDE CUTTER 6mm, ¼” CC6P CARBIDE CUTTER 6mm, ¼” for passenger tires CC8 CARBIDE CUTTER 8mm, 5/16” CC10 CARBIDE CUTTER 10mm, 3/8” QUICK CHANGE ADAPTOR for CC6, CC6P QUICK CHANGE ADAPTOR for CC8 QUICK CHANGE ADAPTOR for CC10 2mm ALLEN WRENCH for small QC adaptors (not shown) 3mm ALLEN WRENCH for S1041/38 QC adaptor (not shown)

Box Qty. 20 20 20 1 1 1 1 1 1 1 1 1

Uni-Seal stems are designed to fill large punctures in truck, agricultural, industrial, and small OTR tires. Once the damage has been removed with the appropriate cutter, the oversized stem fills the injury with a compression fit. The thick chemical cushion gum wrapped around each stem permanently seals and vulcanizes to the tire. These stems must be used in conjunction with the appropriate repair unit on the inside of the tire. Refer to repair charts on pages 7, 10 and 13. UNI-SEAL STEMS FOR LARGE 2-PIECE REPAIR Cat. No. 252-1

252-1

254-1

253-1 272 262

254-1 272

S1041/38

253-1

262

Description UNI-SEAL STEM with Chemical Gum UNI-SEAL STEM with Chemical Gum UNI-SEAL STEM with Chemical Gum CC13 CARBIDE CUTTER for 252-1 BIAS CUTTER for 252-1

Prepared Injury Size 13mm, ½”

Box Qty. 10

20mm, ¾”

10

25mm, 1”

10

13mm, ½”

1

13mm, ½”

1

Dim. (inches) 2¼ 2¼ 3 3½ 3

Box Qty. 25 80 20 10 30

TECH MP Repairs for 2-Piece Repair Tech Multi-Purpose (MP) repairs are produced with unique cross-weave reinforcement and thick chemical cushion gum that provides excellent performance in both radial and bias tires. MP repairs must be used to repair crown area punctures in conjunction with the appropriate Uni-Seal Ultra Stem as a 2-Piece repair.

MULTI-PURPOSE REPAIR UNITS Cat. No. 600 600T 601 602 112

Description MP-0 MP-0 MP-1 MP-2 MP-10

Dim. (mm) 60 60 75 90 75

Refer to Recommended Application Chart on page 7. 600

601

602

5

TECH Centech Radial Nail Hole Repairs for 2-Piece Repair TIRE REPAIR PRODUCTS & REPAIR CHARTS

Global tire industry recommendations and tire manufacturers' warranties state that nail hole repairs (puncture repairs) must include a rubber stem or suitable rubber vulcanizing material to fill the prepared injury and a repair unit to seal the inner liner and reinforce the tire on the inside. Tech Centech Radial Repairs and MP repairs used in conjunction with Uni-Seal Ultra stems meet or exceed these requirements as a 2Piece repair system. Tech's 2-Piece repair system provides a permanent, safe repair for crown and shoulder area injuries that last the life of the tire. For more information refer to Tech How-To-Repair Manual RM-5 or Nail Hole Repair Video RDVD1. CENTECH NAIL HOLE REPAIR UNITS Cat. No. 164 165 165T 166 167 167T 169 170 165

164

167

Description CT10-HD CT-10 CT-10 in plastic tub CT-12HD CT-12 CT-12 in plastic tub CT-14 CT20

Dim. (mm) 65 x 80 45 x 75 45 x 75 70 x 115 60 x 110 60 x 110 75 x 145 75 x 125

Dim. (inches) 2½ x 3¼ 1¾ x 3 1¾ x 3 2¾ x 45/8 23/8 x 43/8 23/8 x 43/8 27/8 x 5¾ 3x5

Box Qty. 10 20 80 10 10 40 10 10

166

TECH Centech Radial Repairs for Shoulder Injuries

CENTECH SHOULDER REPAIR PLACEMENT

SHOULDER REPAIR SHIFTED OUT OF HIGH FLEX FLEX AREA AREAS

CENTECH RADIAL REPAIRS Cat. No. 172 174 RSR-26 172

Description CT-22 CT-24 CT-26-RSR

Dim. (mm) 75 x 165 86 x 222 75 x 250

Dim. (inches) 3 x 6½ 33/8 x 8¾ 3 x 10

Box Qty. 10 10 10

174

TECH Tire Repair Chemicals For best results, Tech nail hole repairs should be used with these Tech chemical products. TECH CHEMICALS

704A

739 751 760

704 751 735

6

760

Cat. No. 704 704A 705C 735 738

738

Description RUB-O-MATIC rubber cleaner, 32 oz., 945ml can RUB-O-MATIC rubber cleaner aerosol spray, 11.75 oz., 336g TECH CITRUS-BASED RUBBER CLEANER, 32 oz., 945ml can BEAD SEALER, 32 oz., 945ml can with brush SECURITY COAT inner liner repair sealer,water based, 16 oz., 470ml can with applicator BUTYL LINER REPAIR SEALER, 32 oz., 945ml can with brush cap TECH CHEK leak detector concentrate, 32 oz., 945ml CHEMICAL VULCANIZING FLUID, 7.8 oz., 230ml can with brush

Box Qty. 1 1 1 1 1 1 1 1

Radial 2-Piece Nail Hole Repair Limitations

S T

CROWN AREA

T S

TIRE REPAIR PRODUCTS & REPAIR CHARTS

SHOULDER (S-T) 1” (25mm) PASSENGER TIRES 1½” (40mm) TRUCK TIRES

NON-REPAIRABLE AREA

MAXIMUM PREPARED INJURY – RADIAL TYPE OF TIRE

Prepared Injury Size

Carbide Cutter

Uni-Seal Stem

Crown Area Repair Unit

(H,V & Z Rated& Run Flat Tires) Limit 1 Per Tire

1/4” (6mm)

CC6 (270)

ULS6 (250-1UL)

CT-10, MP-0 OR 111

Light Truck Tires

1/4” (6mm)

CC6 (270)

ULS6 (250-1UL)

CT-10, MP-0 OR 111

CT-22

5/16” (8mm)

CC8 (271)

ULS8 (251-1UL)

CT-12, MP-0 OR 111

CT-22

3/8” (10mm)

CC10 (271/38)

ULS10 (291-1UL)

CT-20, MP-2 OR 112

CT-24

1/4” (6mm)

CC6 (270)

ULS6 (250-1UL)

CT-10HD, MP-1 OR 111

CT-24

5/16” (8mm)

CC8 (271)

ULS8 (251-1UL)

CT-12HD, MP-2 OR 111

CT-24

3/8” (10mm)

CC10 (271/38)

ULS10 (291-1UL)

CT-20 OR 112

CT-26

3/8” (10mm)

CC10 (271/38)

ULS10 (291-1UL)

CT-20 OR 112

CT-26

Passenger Tires

Truck & Farm Tractor Tires

Heavy Truck & Super Singles

Shoulder Area Repair Unit

REPAIRS MUST NOT OVERLAP!

REPAIRS MUST NOT BE IN THE SAME BODY PLY!

S

CROWN AREA

S

Bias 2-Piece Nail Hole Repair Limitations NON-REPAIRABLE AREA

MAXIMUM PREPARED INJURY – BIAS Prepared Injury Size

Carbide Cutter

Uni-Seal Stem

6 Ply

8 Ply

10-12 Ply

14-22 Ply

1/4” (6mm)

CC6 (270)

ULS6 (250-1UL)

MP-0

MP-0

MP-0

MP-1

5/16” (8mm)

CC8 (271)

ULS8 (251-1UL)

MP-0

MP-1

MP-1

MP-1

3/8” (10mm)

CC10 (271/38)

ULS10 (291-1UL)

MP-1

MP-2

MP-2

112

REPAIRS MUST NOT OVERLAP!

7

TECH Centech Radial Section Repair Units

Top Cover Ply dual layer compound resistant to heat and flex fatigue

Center Platform maximum reinforcement area

Fabric Reinforcement Plies restore tire’s strength, step down design improves radial flex characteristics Bonding Layer vulcanizes to the tire

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Centech Radial Chemical Repairs, produced with soft gray cushion gum, are ideal for cold chemical vulcanization after the prepared injury has been filled with rubber and cured with heat. Centech repairs are center-over-injury designed and reinforced to restore the strength and flexibility to radial tires. For best results, use with 760 Chemical Vulcanizing Fluid or 775 Heavy Duty Blue Cement.

Gray Cushion Gum

Float Ply soft rubber shock absorber

CENTECH CROWN REPAIR UNITS Centech crown repairs reduce preparation and material costs by up to 40% over standard repairs. Cat. No. 177 178 179

Description CT-33 CT-35 CT-37

Dim. (mm) 100 x 125 125 x 150 125 x 170

Dim. (inches) 4x5 5x6 5 x 6¾

Box Qty. 10 10 5

Refer to Repair Limitations Chart on page 10.

177

178

Centech Cloth Back style repairs provide maximum adhesion and shelf life. Add suffix “C” to Cat. No. (177C indicates CT-33 Cloth Back). Aramid reinforcement provides added strength and flexibility to the repair unit to help reduce sidewall bulges. Add suffix “AC” to Cat. No. Not available with gray cushion gum.

179

CENTECH CENTER-OVER-INJURY REPAIR UNITS Cat. No. 176 180 182 184 CT46A*

Description CT-26 CT-40 CT-42 CT-44 Aramid reinforced

Dim. (mm) 75 x 250 100 x 203 125 x 250 125 x 330 156 x 416

Dim. (inches) 3 x 10 4x8 5 x 10 5 x 13 61/8 x 163/8

Box Qty. 10 10 5 5 5

Centech Cloth Back style repairs provide maximum adhesion and shelf life. Add suffix “C” to Cat. No. *Aramid reinforcement provides added strength and flexibility to the repair unit to help reduce sidewall bulges. 180

182

176

CENTECH RADIAL AG REPAIRS Cat. No. 196 197 198 199 198

Dim. (mm) 150 x 195 190 x 250 215 x 290 254 x 350

Dim. (inches) 6 x 7¾ 7½ x 10 8½ x 11½ 10 x 13¾

Box Qty. 5 5 5 5

Add suffix “R” to Cat. No. to order Thermacure Radial Tractor Repairs. Add suffix “C” to Cat. No. to order Cloth Back repairs. 199

196

8

Description CT-80 CT-82 CT-84 CT-86

197

TECH Thermacure Radial Repair Units

Top Cover Ply dual layer compound resistant to heat and flex fatigue

Aramid Platform maximum reinforcement area

Fabric Reinforcement Plies restore tire’s strength, step down design improves radial flex characteristics Bonding Layer vulcanizes to the tire

Tech Thermacure radial repairs, produced with soft black cushion gum, provide excellent adhesion in all heat cure systems. Thermacure has been designed and tested to perform in the tire through multiple retread applications. Thermacure repairs are center-over-injury designed and reinforced to restore the strength and flexibility to all radial tires. For best results, use with Tech Tem-Vulc Black Cement in heat cure applications. Use with 760 Chemical Vulcanizing Fluid or 775 Heavy Duty Blue Cement in cold chemical cure applications.

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Black Cushion Gum

Float Ply soft rubber shock absorber

THERMACURE NAIL HOLE REPAIRS Cat. No. 111R 112R 164R 166R 169R 170R

112R

164R

Description Round All Purpose MP-10R CT-10HDR CT-12HDR CT-14R CT-20R

Dim. (mm) 65 75 65 x 80 70 x 115 75 x 145 75 x 125

Dim. (inches) 2½ 3 2½ x 3¼ 2¾ x 45/8 27/8 x 5¾ 3x5

Box Qty. 50 30 10 10 10 10

Refer to Repair Limitations Chart on page 10. THERMACURE CROWN REPAIRS

111R 166R

Crown repairs reduce preparation and material costs by up to 40% over standard repairs.

170R

Cat. No. 177R 178R 179R

Description CT-33R CT-35R CT-37R

Dim. (mm) 100 x 125 125 x 150 125 x 170

Dim. (inches) 4x5 5x6 5 x 6¾

Box Qty. 10 10 5

Refer to Repair Limitations Chart on page 10. Aramid reinforcement provides added strength and flexibility to the repair unit to help reduce sidewall bulges. Add suffix “AR” to Cat. No. THERMACURE CENTER-OVER-INJURY REPAIRS

179R

Cat. No. 172R 174R 180R 182R 184R CT46AR

178R

177R

180R

Description CT-22R CT-24R CT-40R CT-42R CT-44R Aramid reinforced

Dim. (mm) 75 x 165 86 x 222 100 x 200 125 x 250 125 x 330 156 x 416

Dim. (inches) 3 x 6½ 33/8 x 8¾ 4x8 5 x 10 5 x 13 61/8 x 163/8

Box Qty. 10 10 10 5 5 5

Refer to Repair Limitations Chart on page 10. Aramid reinforcement provides added strength and flexibility to the repair unit to help reduce sidewall bulges. Add suffix “AR” to Cat. No. Aramid reinforcement not available on 172R or 174R. TECH REPAIR TEMPLATES

172R

Used with marking crayons, paint sticks or silver ink pens, templates properly outline area to be buffed. Available for Uni-Seals, Centech repairs through Cat. No. 184, CT-44, Thermacure repairs and 111 All Purpose round repair. Cat. No. 111TM 165TM 167TM 170TM 172TM 174TM 176TM 177TM 178TM 179TM 180TM 182TM 184TM RTMS S3/M10/291TM

Description TEMPLATE for 111 All Purpose Repair, 250UL, 251UL TEMPLATE for CT-10 Centech repair TEMPLATE for CT-12 Centech repair TEMPLATE for CT-20 Centech repair TEMPLATE for CT-22 Centech repair TEMPLATE for CT-24 Centech repair TEMPLATE for CT-26 Centech repair TEMPLATE for CT-33 Centech repair TEMPLATE for CT-35 Centech repair TEMPLATE for CT-37 Centech repair TEMPLATE for CT-40 Centech repair TEMPLATE for CT-42 Centech repair TEMPLATE for CT-44 Centech repair REPAIR TEMPLATE SET TEMPLATE for 3” square repairs

Packaged Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea. Ea.

9

Centech & Thermacure Radial Repair Chart TIRE REPAIR PRODUCTS & REPAIR CHARTS

1” (25mm)

S T

PASSENGER TIRES CROWN AREA

1” (25mm)

T S

LT., TRUCK & AG. TIRES 1 1/2” (40mm)

1 1/2” (40mm)

Centech Radial Truck Tire Repair Chart

A-B NON-REPAIRABLE AREA

CROWN AREA BEGINS 1 1/2” (40mm) IN FROM TREAD EDGE Tube-Type Tire Sizes Sidewall Injury

Centech Radial Passenger Repair Chart

CROWN AREA BEGINS 1” (25mm) IN FROM TREAD EDGE

Width

Through U Speed Rating

Length

Speed Rated H, V, W, Y & Z, and Run Flat Tires

Light Truck Through Load Range E

6.50-12.50 LT 215-285

Note: This section repair chart is a guideline only. Local regulations, load and speed can affect the limitations of section repairs. Injuries beyond the crown area and/or larger than 6mm (1/4") after preparation in passenger and some light truck tires should only be repaired in a full service repair facility.

Sidewall Injury

Shoulder Injury Diameter (S-T Area)

Width

Length

Tubeless Tire Sizes Truck Tire Sizes Heavy Truck 7.50-10.00

11.00-14.00

Crown Injury Diameter (T-T Area)

8-11 12-16.5 235/80-275/80 295/80-315/80 225/75-295/75 305/75-445/65 425/50-495/45 1/4” (6mm)

Crown Injury Diameter

5/16" (8mm)

1/4” (6mm) 3/8” (10mm)

3/8” (10mm) 1/2" (13mm) 3/4” (20mm) 1” (25mm)

1/2” (13mm)

REPAIR UNITS SHOWN IN RED MAY BE USED FOR CROWN OR SIDEWALL INJURIES. TO MAINTAIN THEIR SPEED RATING, PASSENGER TIRES CARRYING A SPEED RATING OF H, V, W, Y OR Z SHOULD ONLY BE REPAIRED IN THE CROWN (T-T) AREA WITH A MAXIMUM SIZE OF 1/4” (6mm).

3/4” (20mm)

Centech Radial AG Tire Repair Chart CROWN AREA BEGINS 1 1/2” (40mm) IN FROM TREAD EDGE

Sidewall Injury

Width

Length

Shoulder Injury

Tractor Sizes 8-11 8.3-12.4

12-15 13.6-23.5 24.5-30.5 440/65-600/65 620/75-1050/50

Crown Injury Diameter

1” (25mm)

1 1/4” (32mm)

3/8” (10mm)

3/4” (20mm) 1 1/2” (40mm)

2 3/4” (70mm)

3 1/2” (90mm) 4” (100mm) 5” (125mm) NOTE: THIS SECTION REPAIR CHART IS A GUIDELINE ONLY. REPAIR UNITS SHOWN IN RED MAY BE USED FOR CROWN OR SIDEWALL INJURIES. LOAD, SPEED AND HIGHWAY APPLICATION CAN AFFECT THE LIMITATIONS OF SECTION REPAIRS.

10

REPAIR UNITS SHOWN BOXED IN RED ARE LIMITED TO CROWN (T-T) AREA ONLY. ALL OTHERS SHOWN IN RED MAY BE USED FOR CROWN OR SIDEWALL INJURIES. NOTE: THIS SECTION REPAIR CHART IS A GUIDELINE ONLY. LOAD, SPEED AND HIGHWAY APPLICATION CAN AFFECT THE LIMITATIONS OF SECTION REPAIRS.

Bias Ply Tire Repairs

Bonding Layer vulcanizes to the tire

Float Ply soft rubber shock-absorbing layer

Top Cover Ply provides dual layer protection from heat and flex fatigue

Largest Fabric Ply

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech BP repair units, produced with soft gray cushion gum, provide excellent adhesion when used with Tech 760 Chemical Vulcanizing Fluid or 775 Heavy Duty Blue Cement. These repairs are designed to restore the strength and flexibility to bias passenger, truck, farm tractor, skidder and small OTR tires.

Smaller Fabric Ply

Platform maximum reinforcement area

BP REPAIRS Cat. No. 603 604 605

Description BP-3 BP-4 BP-5

Dim. (mm) 100 130 165

Dim. (inches) 4 55/16 6½

Plies 2 4 4

Box Qty. 10 10 10

Add suffix “C” to Cat. No. to order Cloth Back repairs. Refer to Repair Limitations Chart on page 13.

603 604

605

BP REPAIRS Cat. No. 606 607 608 609 610

Description BP-6 BP-7 BP-8 BP-9 BP-10

Dim. (mm) 240 290 340 380 430

Dim. (inches) 99/16 115/8 135/8 151/8 171/8

Plies 6 6 6 8 8

Box Qty. 5 5 5 3 3

Add suffix “C” to Cat. No. to order Cloth Back repairs. Refer to Repair Limitations Chart on page 13.

607

606

TECH BPT Bias Ply Tractor Repairs

Tech BPT bias ply repairs are designed with a wide ply reinforcement package that provides strength and flexibility over large injuries in bias agricultural and forestry tires.

BPT BIAS PLY TRACTOR REPAIRS Cat. No. 620 621 622 623 624 625 626 627

620

Description BPT-0 BPT-1 BPT-2 BPT-3 BPT-4 BPT-5 BPT-6 BPT-7

Dim. (mm) 200 225 275 375 225 275 375 490

Dim. (inches) 8 9 11 15 9 11 15 19½

Plies 4 4 4 4 6 6 6 6

Box Qty. 10 5 5 5 5 5 5 3

Add suffix “C” to Cat. No. to order Cloth Back repairs. Refer to Repair Limitations Chart on page 13. 621

11

THERMACURE Bias Ply Tire Repairs TIRE REPAIR PRODUCTS & REPAIR CHARTS

BP Thermacure repairs are designed for bias truck, agricultural and light duty OTR tire applications up to 22 Ply rated. Thermacure soft black cushion gum provides excellent adhesion in cold chemical cure applications when used with 775 Tech Heavy Duty Blue Cement or with 1082 Tech Tem-Vulc Black Cement in heat cure applications.

Bonding Layer vulcanizes to the tire

Float Ply soft rubber shock-absorbing layer

Top Cover Ply provides dual layer protection from heat and flex fatigue

Largest Fabric Ply

Smaller Fabric Ply

Platform maximum reinforcement area

THERMACURE BP REPAIRS Cat. No. 603R 604R 605R 606R 607R 608R 609R 610R

603R 604R

Description BP-3R BP-4R BP-5R BP-6R BP-7R BP-8R BP-9R BP-10R

Dim. (mm) 100 130 165 240 290 340 380 430

Dim. (inches) 4 55/16 6½ 99/16 115/8 135/8 151/8 171/8

Plies 2 4 4 6 6 6 8 8

Box Qty. 10 10 10 5 5 5 3 3

605R

Refer to Repair Limitations Chart on page 13.

TECH Bias Skidder Repairs

Tech Bias Skidder(SK) Repairs are specially designed for forestry application tires. SK repairs utilize a wide platform reinforcement package with OTR tire cord for maximum strength. Tech produces these repairs with Thermacure soft cushion gum for hot or cold vulcanization. For best results use with 775 Heavy Duty Blue Cement or 1082 Tem-Vulc black cement in heat cure applications. BIAS SKIDDER REPAIRS Cat. No. SK12R SK16R SK20R SK24R

Description Bias Skidder Repair Bias Skidder Repair Bias Skidder Repair Bias Skidder Repair

Dim. (mm) 300 400 500 600

Dim. (inches) 12 16 20 24

Plies 6 6 6 8

Box Qty. 12 6 6 3

CROWN AREA

SK20R

TECH Bias Skidder Tire Repair Chart

Ø Prepared injury size is measured at the largest diameter of exposed body ply.

PLY RATING (LOAD RANGE)

PREPARED INJURY SIZE Inches mm

4” 100

5” 125

6” 150

7” 175

8” 200

9” 225

10” 250

11” 275

12” 300

10-12

12

12

12

16

16

20

20

24

24

14-16

12

12

16

20

20

20

24

24

24

18-20

12

16

20

20

20

24

24

24

24

TOR9*

TOR9*

22-24

16

20

20

24

24

24

24

26-28

TOR5

TOR6

TOR7

TOR7

TOR8

TOR8

TOR9

TOR9* TOR10*

FOR 6 TO 8 PLY RATED TIRES AND INJURIES SMALLER THAN SHOWN ON THIS CHART, REFER TO BPT CHART ON PAGE 13. *CROWN AREA INJURIES ONLY.

12

A-B NON-REPAIRABLE AREA

SKIDDER A-B NON-REPAIRABLE AREA Section Width Dimension 14.9-20.8 4”, 100mm 23.1 & larger 5”, 125mm

CROWN AREA

A-B NON-REPAIRABLE AREA 7.00-8.75 3 1/4”, 80mm 9.00-14.00 4”, 100mm 16.00-18.00 5”, 125mm 21.00-27.00 6”, 150mm The above dimensions are guidelines only.

Ø

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Bias Repair Chart

Prepared injury size is measured at the largest diameter of exposed body ply.

TRACTOR A-B NON-REPAIRABLE AREA Section Width A-B Dimension 14.9-20.8 (215-520) 4”, 100mm 23.1 & Larger (600 & Larger) 5”, 125mm The above dimensions are guidelines only.

A-B NON-REPAIRABLE AREA

CHART INSTRUCTIONS: For proper repair unit selection, determine the size of the injury in the tire by measuring largest cord area removed. Locate the correct injury size along the top row of the chart. Now locate the tire’s ply rating (load range) along the left column of the same chart. The repair unit number shown in the box where these intersect is the correct repair unit to use. NOTE: THIS SECTION REPAIR CHART IS ONLY A GUIDELINE. LOAD, SPEED AND APPLICATION OF THE TIRE CAN AFFECT THE LIMITATIONS OF SECTION REPAIRS. CAR, TRUCK AND EARTHMOVER SIZE OF INJURY – TREAD, SHOULDER AND SIDEWALL

PLY RATING (LOAD RANGE)

mm inches

1

3 /8"

6 /4"

10 /8"

1

13 /2"

3

1

20 /4"

25 1"

40 11/2"

50 2"

3

65 21/2"

75 3"

100 4"

4 (B)

MP-0

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

6 (C)

MP-0

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

BP-6

8 (D)

MP-0

MP-0

MP-2

BP-3

BP-3

BP-4

BP-4

BP-5

BP-6

10 (E)

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

BP-6

BP-6

BP-7

BP-8

12 (F)

MP-0

MP-1

MP-2

BP-4

BP-4

BP-4

BP-5

BP-6

BP-6

BP-7

BP-8

125 5"

14 (G)

MP-0

MP-1

BP-3

BP-4

BP-4

BP-5

BP-6

BP-6

BP-7

BP-7

BP-8

BP-10

16 (H)

MP-0

MP-1

BP-4

BP-4

BP-5

BP-5

BP-6

BP-6

BP-7

BP-7

BP-8

BP-10

18 (J)

MP-0

MP-1

BP-4

BP-5

BP-5

BP-6

BP-6

BP-7

BP-8

BP-8

BP-9

BP-10

20 (L)

MP-0

MP-1

BP-4

BP-5

BP-5

BP-6

BP-7

BP-8

BP-8

BP-9

BP-9

BP-10

22 (M)

MP-0

MP-1

BP-4

BP-6

BP-6

BP-7

BP-8

BP-8

BP-8

BP-9

BP-10

150 6"

FARM, TRACTOR, SKIDDER SIZE OF INJURY – TREAD, SHOULDER AND SIDEWALL

PLY RATING (LOAD RANGE)

mm inches

3 /8"

6 /4"

1

1

10 /8"

3

13 /2"

1

20 /4"

25 1"

40 11/2"

50 2"

65 21/2"

75 3"

100 4"

125 5"

150 6"

175 7"

200 8"

3

225 9"

250 10"

BPT-7

4 (B)

MP-0

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

BPT-0

BPT-0

BPT-1

BPT-2

BPT-2

BPT-3

BPT-3

6 (C)

MP-0

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

BPT-0

BPT-0

BPT-1

BPT-2

BPT-2

BPT-3

BPT-3

8 (D)

MP-0

MP-1

MP-2

MP-2

BP-3

BP-4

BP-4

BP-5

BPT-0

BPT-0

BPT-1

BPT-2

BPT-2

BPT-3

BPT-3

BPT-6

10 (E)

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-5

BP-6

BPT-1

BPT-1

BPT-4

BPT-5

BPT-5

BPT-6

BPT-6

BPT-7

BPT-7

12 (F)

MP-0

MP-1

MP-2

BP-4

BP-4

BP-4

BP-5

BP-6

BPT-4

BPT-4

BPT-4

BPT-5

BPT-5

BPT-6

BPT-7

BPT-7

BPT-7

BPT-7

14 (G)

MP-0

MP-1

BP-4

BP-4

BP-4

BP-5

BP-6

BP-6

BPT-4

BPT-5

BPT-5

BPT-5

BPT-6

BPT-7

BPT-7

16 (H)

MP-0

MP-1

BP-4

BP-4

BP-5

BP-5

BP-6

BP-6

BPT-5

BPT-5

BPT-5

BPT-6

BPT-6

BPT-7

BPT-7

18 (J)

MP-1

MP-2

BP-4

BP-5

BP-5

BP-6

BP-6

BP-7

BPT-5

BPT-5

BPT-6

BPT-6

BPT-7

* FOR INJURIES LARGER THAN INDICATED ON THIS CHART OR FOR TIRES WITH PLY RATINGS HIGHER THAN 18, REFER TO THE BIAS SKIDDER REPAIR CHART.

PLY RATING (LOAD RANGE)

*REINFORCEMENT REPAIRS SIZE OF INJURY – TREAD, SHOULDER AND SIDEWALL mm inches

1

6 /4"

10 /8"

3

13 /2"

1

20 /4"

25 1"

40 11/2"

50 2"

65 21/2"

75 3"

100 4"

125 5"

3

8-12 (D-F)

MP-0

MP-1

MP-2

BP-3

BP-3

BP-4

BP-4

BP-5

BP-6

BP-7

BP-8

14-18 (G-J)

MP-0

MP-1

MP-2

BP-4

BP-4

BP-5

BP-5

BP-6

BP-6

BP-7

BP-8

20-22 (L-N)

MP-0

MP-2

BP-4

BP-5

BP-5

BP-6

BP-6

BP-7

BP-7

BP-8

BP-9

150 6"

* INJURIES THROUGH 25%, BUT LESS THAN 75% OF THE BODY PLIES REQUIRE BOTH HOLE FILLING MATERIAL AND REINFORCED REPAIR UNIT TO BE INSTALLED INSIDE THE TIRE.

13

TIRE REPAIR PRODUCTS & REPAIR CHARTS

CENTECH Aramid Reinforced Radial OTR Repairs

Centech Radial OTR repairs are reinforced with Aramid cord for maximum strength. Advanced rubber compounds provide longer performance life in the most extreme OTR tire service conditions. Centech Radial OTR repairs are very flexible, resulting in easy installation, minimizing the chances of trapped air as well as restoring the strength of the tire with little resistance to the tire’s flex characteristics. Tech is pleased to offer the most complete line of radial OTR repairs in the industry. Tech OTR repairs are available to work in all types of curing systems and perform in any tire service application.

CENTECH CHEMICAL OTR REPAIRS WITH ARAMID REINFORCEMENT Centech Chemical repairs with Aramid reinforcement are recommended when the tires are cured with spotters or press systems. The repair unit is installed with Tech Chemical Vulcanizing Fluid or Heavy Duty Blue Cement after the filler rubber has been cured.

761

776

CENTECH THERMACURE OTR REPAIRS WITH ARAMID REINFORCEMENT Centech Thermacure repairs with Aramid reinforcement are recommended when the tires are cured with spotters, press systems, section molds or Monaflex systems. Thermacure repair units should be installed with Tech Heavy Duty Blue Cement after the filler rubber has been cured. In heat cure applications the repair unit may also be installed using Tech TemVulc Black Cement.

776

1082

CENTECH CLOTH BACKED OTR REPAIRS WITH ARAMID REINFORCEMENT Centech Cloth Backed repairs with Aramid reinforcement are recommended for all heat cure vulcanizing systems. These repair units are produced on a special cloth backing material which provides optimum bonding surface texture. For best results, use with Tech TemVulc Black Cement and Vul-Gum cushion gum. Cloth backed repairs have a 5 year shelf life.

1082

CENTECH HEAT CURE OTR REPAIRS WITH ARAMID REINFORCEMENT Centech Heat Cure repairs with Aramid reinforcement are recommended for all heat cure vulcanizing systems and for section repairs requiring cure times longer than 5 hours. For best results, use with Tech TemVulc Black Cement.

1082

14

TIRE REPAIR PRODUCTS & REPAIR CHARTS

CENTECH Aramid Reinforced Radial OTR Repairs CENTECH CENTER OVER INJURY OTR REPAIRS Chemical Thermacure Heat Cure Cloth Back Repair Cat. No. Repair Cat. No. Repair Cat. No. Repair Cat. No.

Dimension inches

Dimension mm

Box Quantity

CT46A

CT46AR

CT46AH

CT46AC

6 1/8 x 16 3/8

156 x 416

5

CT50A

CT50AR

CT50AH

CT50AC

8 x 19 1/8

200 x 486

3

CT52A

CT52AR

CT52AH

CT52AC

10 x 22 1/2

250 X 570

3

CT56A

CT56AR

CT56AH

CT56AC

10 1/2 X 29 1/2

265 X 748

3

CT60A

CT60AR

CT60AH

CT60AC

10 1/2 X 34

265 X 860

3

CT62A

CT62AR

CT62AH

CT62AC

12 1/2 X 40 1/2

325 X 1030

1

CT72A

CT72AR

CT72AH

CT72AC

13 3/4 X 30

345 X 760

1

CENTECH CROWN ONLY REPAIRS WITH ARAMID REINFORCEMENT Centech Crown Only repair units reduce repair costs by up to 40%. These repairs can be used on crown area injuries instead of much larger traditional center over injury repairs, resulting in lower material cost and less preparation time. These repairs have been redesigned to provide a wider range of placement in the crown area of the tire. Centech crown repair units are produced with chemical, Thermacure, and heat cure gums as well as cloth backed and uncured.

CT46A

REDUCE REPAIR COSTS BY UP TO 40% CT45A

CENTECH CROWN ONLY OTR REPAIRS Chemical Thermacure Heat Cure Cloth Back Repair Cat. No. Repair Cat. No. Repair Cat. No. Repair Cat. No.

CT45A

CT45AR

CT45AH

CT45AC

Uncured Repair No.

Dimension Inches

Dimension mm

Box Quantity

CT45AU

9 1/8 x 7 3/4

230 x 195

5

CT55A

CT55AR

CT55AH

CT55AC

CT55AU

13 x 10 1/4

330 x 260

3

CT65A

CT65AR

CT65AH

CT65AC

CT65AU

16 1/2 x 13

420 x 330

3

CT75A

CT75AR

CT75AH

CT75AC

CT75AU

20 3/4 x 17 3/4

535 x 450

1

CT85A

CT85AR

CT85AH

CT85AC

CT85AU

28 x 22

710 x 560

1

15

TIRE REPAIR PRODUCTS & REPAIR CHARTS

TECH AX Severe Service Radial Repairs

AX radial repairs are a proven design, enhanced with a large aramid reinforced platform and advanced rubber compounds to perform in the most extreme service conditions. The AX non-flex to non-flex design is recommended for shoulder and sidewall injuries in tires used in severe service applications*. AX Severe Service repairs are available in Uncured or Cloth Back for tires up to 63” rim diameter. These repairs are recommended for all heat cure vulcanizing systems. For best results, use with Tech Tem-Vulc Black Cement. *For more information refer to Tech’s OTR Repair Manual, RMOTR.

Shoulder

Sidewall AX Repair Unit

AX UNCURED

AX CLOTH BACK

AX SEVERE SERVICE RADIAL OTR REPAIRS

16

Uncured Repair Cat. No.

Cloth Back Repair Cat. No.

Dimension Inches

Dimension mm

Box Quantity

AX50U

AX50C

8 x 19 1/8

200 x 486

6

AX60U

AX60C

8 1/2 X 24

215 X 610

6

AX80U

AX80C

9 1/2 X 28

240 X 710

3

AX100U

AX100C

11 X 31

280 X 790

3

AX120U

AX120C

11 X 35

280 X 890

3

AX140U

AX140C

14 1/2 X 46

370 X 1170

1

AX155U

AX155C

10 X 55

250 X 1400

1

SHOULDER CROWN TIRE REPAIR PRODUCTS & REPAIR CHARTS

TECH Radial OTR Repair Chart Centech Aramid Reinforced Repairs

SIDEWALL

NON REPAIRABLE AREA

Sidewall Injury

Shoulder Injury

L Or

Earthmover Tire Sizes Inner liner removed on these sizes

Crown Injury Or

W

DETERMINING CROWN INJURY REPAIR AREA

REPAIR UNIT DIMENSIONS Millimeters Repair Unit Inches

REPAIR UNITS SHOWN BOXED IN RED ARE LIMITED TO CROWN (T-T) AREA ONLY. ALL OTHERS SHOWN IN RED MAY BE USED FOR CROWN, SHOULDER OR SIDEWALL INJURIES. NOTE: THIS SECTION REPAIR CHART IS A GUIDELINE ONLY. INCREASE REPAIR UNIT BY ONE (1) SIZE FOR TIRES USED IN SEVERE APPLICATIONS SUCH AS HAULAGE TRUCKS AND SCRAPERS. LOAD, SPEED AND HIGHWAY APPLICATION CAN AFFECT THE LIMITATIONS OF SECTION REPAIRS.

17

TIRE REPAIR PRODUCTS & REPAIR CHARTS

AX Aramid Reinforced Radial OTR Repair Chart Severe Service Repairs

SHOULDER CROWN

UNCURED

SIDEWALL

CLOTH BACK

NON REPAIRABLE AREA

Sidewall Injury

Shoulder Injury

Crown Injury

Earthmover Tire Sizes Inner liner removed on all severe service applicatons

Width Length inches inches (mm) (mm)

1 (25)

10 (250)

1 1/4 (30mm)

12 (300)

1 1/2(40) 1 1/2(40)

14(350) 16(400)

Diameter inches (mm)

1 (25)

1 1/2 (40) 2 (50) 2 (50) 2 (50) 2 (50) 2 (50) 2 (50)

8(200) 11 (275) 14 (350) 18 (450) 19 (475) 22 1/2((570)

2 3/8 (60)

18 (450)

2 1/2 (65) 2 1/2 (65)

6 (150) 14 (350)

2 (50)

2 1/2 (65) 2 3/4 (70)

16 (405)

3 (75) 3 (75) 3 (75) 3 (75)

5 1/2 (140) 11 (275) 12 (300) 16 (400)

3 1/4 (85)

16 1/2 (420)

3 1/2 (90) 3 1/2 (90) 3 1/2 (90)

7 1/2 (190) 9 (225) 12 (300) 5 (125) 6 (150)

4 (100) 4 (100)

9 (225) 11 (275)

CT45A AX50 AX50 AX60 CT45A AX80 AX50 CT55A AX50 AX60

6 1/2 (165) 6 (150) 10 1/2 (265)

5 (125) 5 (125)

5 (125) 7 (175)

6 (150) 6 (150)

3 (75) 5 (125)

30.00-33.00 37.25-37.50 40/65-45/65

36.00-40.00 46/90-59/80 50/65-65/65

Diameter inches (mm)

CT45A AX60 AX60 AX80 CT55A AX80 AX100 AX60 CT55A AX80 AX80 AX80 AX120 AX120

CT45A

1 (25)

CT55A

1 1/2 (40)

CT75A AX80 AX100 AX120 CT75A AX100 AX100

CT45A AX80 AX80 AX80 CT55A AX80 AX100 AX100 CT55A AX100 AX100 AX120 AX120 AX140 AX140 AX120 AX140 CT65A AX100 AX120 AX140 AX120 CT75A AX100 AX120 AX120 AX120 AX140 AX140 CT75A AX120 AX120 AX120 CT75A AX120 AX120

AX100

AX120

AX120 AX100 AX120

AX140 AX120 AX120 AX140 CT85A AX120 AX120 CT85A AX140 AX140

AX80

CT55A AX50

CT65A AX80 AX100 AX100

AX50

AX60

AX60 AX80 AX80 AX60

4 (100) 4 1/2 (115) 4 3/4 (120) 4 3/4 (120)

24.00-27.00 29.5-33.5 35/65

AX50

AX50

3 (75)

4 (100) 4 (100)

18.00-21.00 20.5-26.5

AX80 AX80

CT65A AX80 AX100 AX120 AX100

CT85A AX120 AX120 AX120

AX120 AX120 CT65A AX120 AX120 AX120 AX140 AX140 AX155 AX140 OR AX155* AX155 CT65A AX140 AX140 AX140 or AX155* AX155 CT75A AX140 AX140 AX140 AX155 AX140 or AX155* AX155 CT75A AX120 AX120 AX140 CT75A AX140 AX140 AX140 AX155 AX155 AX140 AX140 AX140 CT85A AX140 AX140 CT85A AX140 AX140

*USE THE AX140 ON 57” TIRES AND THE AX155 ON 63” TIRES. REPAIR UNITS SHOWN BOXED IN RED ARE LIMITED TO CROWN (T-T) AREA ONLY. NOTE: THIS SECTION REPAIR CHART IS A GUIDELINE ONLY.

18

DETERMINING CROWN INJURY REPAIR AREA (T-T AREA)

2 (50)

2 1/2 (65)

60% X 25” = 15” (7.5”) (7.5”)

25”

SHOULDER

3 (75)

SIDEWALL CROWN CENTERLINE USE 50% MULTIPLIER FOR STANDARD ASPECT RATIO TIRES

3 1/2 (90) A – B NON REPAIRABLE AREA

4 (100)

REPAIR UNIT DIMENSIONS

5 (125)

5 1/2 (140)

Repair Unit

inches

mm

CT45A CT55A CT65A CT75A CT85A AX50 AX60 AX80 AX100 AX120 AX140 AX155

9 1/8 X 7 3/4 13 X 10 1/4 16 1/2 X 13 20 3/4 X 17 X 3/4 28 X 22 5 1/2 x 20 1/2 8 1/2 x 24 9 1/2 x 28 11 x 31 11 x 35 14 1/2 x 47 10 x 55

230 X 195 330 X 260 420 X 330 535 X 450 710 X 560 140 x 520 215 x 610 240 x 710 280 x 790 280 x 890 370 x 1190 250 x 1400

TECH Off Road (TOR) Bias OTR Repairs

Wide platform for maximum reinforcement

Larger, heavier plies for increased strength

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech TOR’s repair injuries up to 11”, 275mm in 60plus ply rated tires. One-piece construction reduces repair costs and increases productivity by providing easier installation, eliminating the need for piggybacking repairs. Specially designed plies dissipate stress and provide maximum flexibility and strength. Advanced rubber compounding throughout the repair construction resists over cure and flex fatigue when the tire is returned to service. Tech is pleased to offer a complete line of TOR repairs suited for every type of curing system in the industry.

TOR CHEMICAL REPAIRS TOR Chemical repairs with gray chemical cushion gum are recommended for tires vulcanized with spotters or press systems. The repair unit is installed with Tech Chemical Vulcanizing Fluid or Heavy Duty Blue Cement after the filler rubber has been cured.

389

TOR THERMACURE REPAIRS TOR Thermacure repairs with soft black cushion gum are recommended for tires cured with spotters, press systems, section molds or Monaflex systems. Thermacure repair units should be installed with Tech Heavy Duty Blue Cement after the filler rubber has been cured. In heat cure applications the repair unit may also be installed using Tech Tem-Vulc Black Cement.

386R

TOR CLOTH BACKED REPAIRS TOR Cloth Backed repairs are produced on a special cloth backing material. When removed, this provides optimum bonding surface texture. For best results, use with Tech TemVulc Black Cement and Vul-Gum cushion gum. Cloth backed repairs have a 5 year shelf life.

386C

19

TIRE REPAIR PRODUCTS & REPAIR CHARTS

TECH Off Road (TOR) Bias OTR Repairs

Wide platform for maximum reinforcement

Larger, heavier plies for increased strength

TOR HEAT CURE REPAIRS TOR Heat Cure repairs produced with black heat cure cushion gum are recommended for all heat cure vulcanizing systems. The special heat cure gum resists over cure during section repairs requiring extended cure times. For best results, use with Tech Tem-Vulc Black Cement.

389H

TOR UNCURED REPAIRS TOR Uncured repairs provide excellent adhesion and appearance when vulcanized in autoclaves section molds, or with a Monaflex system. Uncured TORs are ready to be installed or can be floated in the tire. For best results use, Tech Tem-Vulc Black Cement.

389U

387U

BIAS TOR REPAIRS Chemical Thermacure Heat Cure Repair Repair Repair Cat. No. Cat. No. Cat. No.

20

Cloth Back Repair Cat. No.

Uncured Repair Cat. No.

Diagonal Diagonal Dimension Dimension inches mm

Plies

Box Quantity

TOR1

TOR1R

TOR1H

TOR1C

TOR1U

9 3/4

250

2

10

TOR2

TOR2R

TOR2H

TOR2C

TOR2U

11 1/2

290

4

10

TOR3

TOR3R

TOR3H

TOR3C

TOR3U

12 1/4

310

4

5

TOR4

TOR4R

TOR4H

TOR4C

TOR4U

15

380

6

5

TOR5

TOR5R

TOR5H

TOR5C

TOR5U

18 3/4

475

6

5

TOR6

TOR6R

TOR6H

TOR6C

TOR6U

21 3/8

545

6

3

TOR7

TOR7R

TOR7H

TOR7C

TOR7U

24 1/4

615

8

1

TOR8

TOR8R

TOR8H

TOR8C

TOR8U

27 1/4

690

8

1

TOR9

TOR9R

TOR9H

TOR9C

TOR9U

30

760

10

1

TOR10

TOR10R

TOR10H

TOR10C

TOR10U

32 3/4

830

10

1

TOR11

TOR11R

TOR11H

TOR11C

TOR11U

34 1/4

870

10

1

TECH Off Road (TOR) & Bias Skidder Repair Chart

CROWN AREA

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Ø Prepared injury size is measured at the largest diameter of exposed body ply.

A-B NON-REPAIRABLE AREA

CHART INSTRUCTIONS: For proper repair unit selection, determine the size of the injury in the tire by measuring largest cord area removed. Locate the correct injury size along the top row of the chart. Now locate the tire’s ply rating (load range) along the left column of the same chart. The repair unit number shown in the box where these intersect is the correct repair unit to use. NOTE: THIS SECTION REPAIR CHART IS ONLY A GUIDELINE. LOAD, SPEED AND APPLICATION OF THE TIRE CAN AFFECT THE LIMITATIONS OF SECTION REPAIRS.

BIAS SKIDDER TIRE (SK) REPAIR CHART PLY RATING (LOAD RANGE)

PREPARED INJURY SIZE Inches mm

4” 100

5” 125

6” 150

7” 175

8” 200

9” 225

10” 250

11” 275

12” 300

10-12

12

12

12

16

16

20

20

24

24

14-16

12

12

16

20

20

20

24

24

24

18-20

12

16

20

20

20

24

24

24

24

TOR9*

TOR9*

22-24

16

20

20

24

24

24

24

26-28

TOR5

TOR6

TOR7

TOR7

TOR8

TOR8

TOR9

TOR9* TOR10*

FOR 6 TO 8 PLY RATED TIRES AND INJURIES SMALLER THAN SHOWN ON THIS CHART, REFER TO BPT CHART ON PAGE 13. *CROWN AREA INJURIES ONLY.

BIAS OTR TIRE (TOR) REPAIR CHART

CROWN INJURIES ONLY

PLY RATING (LOAD RANGE)

PREPARED INJURY SIZE Inches mm

1/2” 13

1” 25

1.5” 40

2” 50

2.5” 65

3” 75

4” 100

5” 125

6” 150

6-8

1

2

2

2

2

3

10-12

1

2

2

2

2

3

4

14-16

1

2

2

3

3

4

18-20

2

2

2

3

3

22-24

2

2

2

3

3

26-28

2

2

3

3

30-36

2

2

3

38-44

2

2

3

46-50

2

3

52-58

3

60+

3

7” 175

8” 200

9” 225

10” 250

11” 275

12” 300

4

4

5

4

4

5

5

6

4

5

5

6

4

5

5

6

7

7

7

8

7

8

8

9

9

10

3

4

5

6

6

3

4

6

6

7

7

8

9

8

8

9

9

9

10

10

9

10

10

4

4

5

6

7

8

8

9

10

10

10

11

11

11

3

4

4

5

6

4

5

5

6

7

7

8

8

8

8

9

10

10

11

11

11

11

10

11

11

11

11

21

TIRE REPAIR PRODUCTS & REPAIR CHARTS

TECH Rope Rubber

Tech TRR and LRR rope rubber are produced with a high quality natural rubber compound which provides excellent extrusion and workability, maximum adhesion to the tire, and outstanding wear and weather resistance. Tech rope rubber is packaged in 15 pound plastic pails for maximum protection during transport and storage. TECH ROPE RUBBER Cat. No. LRR

Description ROPE RUBBER 3/8” (10mm) diameter for sidewall applications

TRR

ROPE RUBBER 3/8” (10mm) diameter for tread applications

S182

EXTRUDER GUN

TRR

Pkg. Qty. 15 lbs., 6.8kg

Specifications RMA Cure Class 20C Shore Hardness 60+/- 3 Tensile 2700 minimum Modulus 800 minimum Elongation 400 minimum RMA Cure Class 20C Shore Hardness 65+/- 3 Tensile 2700 minimum Modulus 1100 minimum Elongation 450 minimum 110V (220V available by special order)

15 lbs., 6.8kg

1

S182

TECH Vul-Gum

Tech Vul-Gum cushion gum natural rubber compound provides excellent adhesion to prepared rubber surfaces. Suitable for floating repair units, filling skives, or spot repairs. RMA cure class 20A, 20 minutes at 280°F (138°C).

VUL-GUM CUSHION GUM Cat. No. 849 850 862 867 868 869 870

Gauge & Width (mm / inches) 6 x 150 / ¼ x 6 3 x 150 / 1/8 x 6 3 x 475 / 1/8 x 19 1.5 x 475 / 1/16 x 19 0.8 x 475 / 1/32 x 19 3 x 750 / 1/8 x 30 1.5 x 750 / 1/16 x 30

Weight/Roll (kg / lb.) 4.5 / 10 4.5 / 10 6.8 / 15 6.8 / 15 6.8 / 15 6.8 / 15 6.8 / 15

Rolls/ Box 1 1 1 1 1 1 1

Weight/Roll (kg / lb.) 0.5 / 1 0.9 / 2 0.9 / 2 1.8 / 4 2.7 / 6 3.6 / 8

Rolls/ Box 5 9 9 4 3 2

849

867

VUL-GUM STRIPPING STOCK Cat. No. 855 861 863 864 865 866

866

864 855

22

Gauge & Width (mm / inches) 0.4 x 40 / 1/64 x 1½ 3 x 25 / 1/8 x 1 1.5 x 25 / 1/16 x 1 1.5 x 50 / 1/16 x 2 1.5 x 75 / 1/16 x 3 1.5 x 100 / 1/16 x 4

TECH Fabric Reinforced Rubber FABRIC REINFORCED RUBBER CUSHION GUM Description Square Woven Nylon 1 Ply Nylon Cord 1 Ply Nylon Cord

Gauge & Width (mm / inches) 1.5 x 425 / 1/16 x 19 0.8 x 425 / 1/32 x 19 0.8 x 660 / 1/32 x 26

Weight/Roll (kg / lb.) 11.5 / 25 11.5 / 25 11.5 / 25

Rolls/ Box 1 1 1

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Cat. No. BT18 BN18 TCG

BT18

TECH Butyl Gum & Chemical Cure Rubber

HEAT CURE INNER LINER REPAIR GUM Cat. No. Description BTLG-125/10# Butyl Gum 848 Butyl Gum 854

Gauge & Width (mm / inches) 0.8 x 425 / 1/32 x 19 0.8 x 100 / 1/32 x 4

Weight/Roll (kg / lb.) 4.5 / 10 4.5 / 10

Rolls/ Box 1 1

Gauge & Width (mm / inches) 0.8 x 150 / 1/32 x 6

Weight/Roll (kg / lb.) 2.72 / 6

Rolls/ Box 1

0.8 x 225 / 1/32 x 9

5 / 11

1

0.8 x 450 / 1/32 x 18

5 / 11

1

Weight/Roll (kg / lb.) 0.5 / 1

Rolls/ Box 5

CHEMICAL CURE INNER LINER REPAIR GUM Cat. No. GH100 GH200 GH218

Description Chemical Cushion Gum Chemical Cushion Gum Chemical Cushion Gum

GH200

CHEMICAL CURE STRIPPING STOCK

GH218

Cat. No. 854

TECH A & B Compound

Description Gray Chemical Gum

Gauge & Width (mm / inches) 0.4 x 25 / 1/64 x 1

A&B Compound is a two part self vulcanizing rubber compound for bead, spot, and section repairs. For best results, use with Tech #760 Chemical Vulcanizing Fluid or #775 Heavy Duty Blue Cement. A & B COMPOUND TWO-PART CHEMICAL CURE FILLER RUBBER Cat. No. Description 858 A & B COMPOUND, set of two 0.5kg, 1 lb. cans 859 A & B COMPOUND, set of two 0.9kg, 2 lb. cans

859

858

23

TECH Tire Repair Chemicals TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech Chemical Vulcanizing Fluid and Rub-O-Matic contain no CFC’s and are more environmentally friendly than chemicals with CFC’s. Rub-O-Matic removes contamination from the inner liner quickly and easily. Tech’s Atomizer is a refillable, rechargeable sprayer which uses clean, dry air as the propellant for Tech chemicals. Fast-drying Tech Chemical Vulcanizing Fluid cures tire and tube repairs with or without heat.

Heavy Duty Blue Vulcanizing Fluid is an extra thick vulcanizing fluid for hot or cold application. This formula works well with single coat coverage when applying large bias or radial repairs in tubeless or tube-type tires, and for any hard gum repair applications. Tech offers both solvent-based and water-based inner liner repair sealants, which restore overbuff areas on tubeless tire inner liners. Tech-Chek concentrate detects hard to locate leaks. RUB-O-MATIC

704

704A

975

Cat. No. 704 704A 704G 704-5G 704-55G 705C 975

Description RUB-O-MATIC, 1qt., 945ml can RUB-O-MATIC, in aerosol spray can, 11.75 oz., 336g RUB-O-MATIC, 1 gal., 3.8 liter can RUB-O-MATIC, 5 gal., 19 liter RUB-O-MATIC, 55 gal., 209 liter TECH CITRUS-BASED RUBBER CLEANER, 32 oz., 945ml can ATOMIZER, 16 oz., 453.6g refillable sprayer

704G

TECH VULCANIZING FLUIDS Cat. No. 760 761 762 765* 766* 767* 768 770 770

761 765 768

766

760

Description CHEMICAL VULCANIZING FLUID, 7.8 oz., 230ml can with brush cap CHEMICAL VULCANIZING FLUID, 1 qt., 945ml can CHEMICAL VULCANIZING FLUID, 1 gal., 3.8 liter CHEMICAL VULCANIZING FLUID, 50ml tube, box of 24 CHEMICAL VULCANIZING FLUID, 20ml tube, box of 24 CHEMICAL VULCANIZING FLUID, 10ml tube, box of 24 FLOW SEAL VULCANIZING FLUID, 8 oz., 235ml can with brush cap For insert use only. FLOW SEAL VULCANIZING FLUID, 7 oz., 205ml with flip top dispenser

*All tubes of Tech Chemical Vulcanizing Fluid come packaged in self-merchandising display cartons. Sold in full box quantities of 24 only.

767

TECH VULCANIZING FLUIDS Cat. No. 775 776

1082-5G

776

777 1082

968LB

775 968RLB 1082

1082G 1082-5G 1082-55G 968LB 968RLB

Description HEAVY DUTY BLUE VULCANIZING FLUID 8 oz., 235ml can with brush cap HEAVY DUTY BLUE VULCANIZING FLUID 1 qt., 945ml can with brush cap HEAVY DUTY BLUE VULCANIZING FLUID, 1 gal., 3.8 liter TEMVULC brush type vulcanizing and retread cement for heat vulcanizing applications. 1 qt., 945ml can TEMVULC BLACK CEMENT, 1 gal., 3.8 liter TEMVULC BLACK CEMENT, 5 gal., 19 liter TEMVULC BLACK CEMENT, 55 gal., 209 liter ALUMINUM CEMENT DISPENSER with long brush, 1 qt., 945ml REPLACEMENT LID AND BRUSH for 968LB

TECH CHEMICALS Cat. No. 738 738G 739 706-1 751 751-5G 751-55G 969

751 706-1

738

24

969

Description SECURITY COAT overbuff inner liner sealant, 16 fl. oz., 470ml SECURITY COAT, 1 gal., 3.8 liter BUTYL LINER REPAIR SEALER, 32 oz., 945ml can with brush cap TIRE TALC, 1 lb., .5kg TECH-CHEK concentrate, 1 qt., 945ml bottle TECH-CHEK concentrate, 5 gal., 19 liter TECH-CHEK concentrate, 55 gal., 209 liter SPRAY BOTTLE, 16 oz., 470ml

TECH 2-Way Tube Repairs* & All Purpose Repairs

TIRE REPAIR PRODUCTS & REPAIR CHARTS

Tech 2-Way tube repairs are the finest made today. Every repair is permanent and safe, and the repair is twice as strong as the tube itself. Tech makes round and oval repairs for any size injury, on or off the road. Tech is the pioneer of self-vulcanizing repairs, so you can depend on high quality Tech repairs throughout the line. Tech All-Purpose repairs are designed for use in radial and bias tires. New compounding and thicker rubber helps to resist dimpling. Tech All-Purpose repairs can also be used for tube repairing. *Patent No. 2,582,770

ROUND 2-WAY TUBE REPAIRS

11

13 12

Cat. No. 09 10 11 12 13 14 15 10T 11T 12T 13T

Dim. (mm) 25 35 45 60 80 100 125 35 45 60 80

Dim. (inches) 1 13/8 1¾ 2¼ 31/8 4 5 13/8 1¾ 2¼ 31/8

Box Qty. 140 50 40 30 20 20 10 200 160 100 75

Dim. (mm) 40 x 30 65 x 40 100 x 50 150 x 70 160 x 100 40 x 30 65 x 40

Dim. (inches) 1½ x 11/8 2½ x 1½ 4x2 6 x 2¾ 6¼ x 4 1½ x 11/8 2½ x 1½

Box Qty. 100 30 20 20 10 200 120

Description TINY ROUND MINI ROUND SMALL ROUND MEDIUM ROUND LARGE ROUND MAXI ROUND GIANT ROUND MINI ROUND TUB SMALL ROUND TUB MEDIUM ROUND TUB LARGE ROUND TUB

OVAL 2-WAY TUBE REPAIRS

18

17

Cat. No. 16 17 18 19 20 16T 17T

19

Description MINI OVAL SMALL OVAL MEDIUM OVAL LARGE OVAL GIANT ROUND MINI OVAL TUB SMALL OVAL TUB

20

TUBE REPLACEMENT VALVES 6220

6218 6230

VH592

VH591

6213

Cat. No. 6213

TR No. 13

6214



6218

218

6220



6230



VH591 VH592

– –

Description PASSENGER VALVE for .453 rim hole, 2½”, 63mm base diameter RIM HOLE BUSHING for .625 rim hole, protects tube valve AIR/LIQUID TRACTOR VALVE 4¼”, 110mm base diameter MICHELIN VALVE SPUD 4¼”, 110mm base diameter TRUCK VALVE SPUD 4¼”, 110mm base diameter PLASTIC RIM NUT for 6218 BRASS RIM NUT for 6218

Box Qty. 10 50 10 5 5

TECH ALL-PURPOSE REPAIRS

117NB

111

115

Cat. No. 111 115 116 117NB

Dim. Dim. Box Description (mm) (inches) Qty. AP8 ROUND ALL PURPOSE 65 2½ 50 AP4.5 SQUARE ALL PURPOSE 45 1¾ 100 AP6 SQUARE ALL PURPOSE 55 2¼ 80 NAIL BUSTER Contains [40] 115 double pack All Purpose square repairs and [30] 116 All Purpose square repairs

116

25

TECH Permacure Inside/Outside Reinforced Repairs & Repair Kits

NAILHOLE INSERTS & REPAIR KITS

®

Tech Permacure repairs utilize an exclusive nylon reinforced design that makes applying repairs easier, virtually eliminating cutting and resulting in less labor time and a durable repair, which permanently vulcanizes through the tire injury.

Tech’s unique cushion gum flows and cures into cracks and crevices, and actually vulcanizes to the tire itself. Permacure II repair units are excellent for smaller injuries. Permacure and Permacure II repairs can be used in the crown of all radial and bias tubeless passenger and truck tires - as well as the crown, shoulder and sidewall areas of all radial and bias tubeless agricultural, ATV and off-the-road tires. Permacure repairs can be used as an injury filler material and then backed up with the appropriate repair unit. Note: Industry recommendations state that the tire should be demounted and repaired from the inside using suitable rubber vulcanizing material and appropriate repair unit on the inner liner. PERMACURE & PERMACURE II REPAIRS Cat. No. 220 222 911 915 925 926

925 911

Box Description Qty. PERMACURE II REPAIRS, 3¾”, 95mm 50 PERMACURE REPAIRS, 3¾”, 95mm 50 PERMACURE WRENCH, 2mm SPIRAL CEMENT TOOL PERMACURE PASSENGER TOOL PERMACURE PASSENGER REPLACEMENT NEEDLE

220 926

222

915

PERMACURE TRUCK REPAIRS

915

911

Cat. No. 224 270 911 915 925T 927

Description PERMACURE REPAIRS, 51/8”, 130mm CARBIDE CUTTER PERMACURE WRENCH, 2mm SPIRAL CEMENT TOOL PERMACURE TRUCK TOOL PERMACURE TRUCK REPLACEMENT NEEDLE

Box Qty. 40

224 927 925T

270

PERMACURE EARTHMOVER REPAIRS

916 226

925E

Cat. No. 226 911 915 916 925E 928

Box Description Qty. PERMACURE REPAIRS, 7½”, 190mm 25 PERMACURE WRENCH, 2mm SPIRAL CEMENT TOOL GIANT SPIRAL CEMENT TOOL PERMACURE EARTHMOVER TOOL PERMACURE EARTHMOVER REPLACEMENT NEEDLE

911

928

PERMACURE KITS No. 215 PERMACURE REPAIR KIT BOX contains:  No. 220/222 Combination box of Permacure repairs contains [25] 220 Permacure II repairs and [25] 222 Permacure repairs  No. 770 Flow-Seal Vulcanizing Fluid  No. 911 Permacure Wrench, 2mm  No. 915 Spiral Cement Tool  No. 925 Permacure Tool w/Passenger Needle  No. 926 Permacure Passenger Replacement Needle

215

26

216

No. 216 PERMACURE TRUCK REPAIR KIT BOX contains:  No. 224 Permacure repairs  No. 770 Flow-Seal Vulcanizing Fluid  No. 911 Permacure Wrench, 2mm  No. 915 Spiral Cement Tool  No. 925T Permacure Tool w/Truck Needle  No. 927 Permacure Truck Replacement Needle

TECH Flow-Seal Inserts, Self-Vulcanizing Inside/Outside Repairs ®

NAILHOLE INSERTS & REPAIR KITS

Tech Flow-Seal Inserts are designed for demounted tires and can be used to fill an injury and are very effective when backed up with the appropriate repair unit. Tech Insert-O-Matic tool (Cat. No. 920) and Insert-O-Mates (Cat. No. 203) make inserting repairs fast and easy. Insert-O-Mates fit on the end of the Insert-O-Matic tool, allowing the insert to be easily applied into the tire. Note: Industry recommendations state that the tire should be demounted and repaired from the inside using suitable rubber vulcanizing material and appropriate repair unit on the inner liner. Actual cross-section photo of in Insert in a steel belted radial tire that was run 50,000 miles (81,000km) on a test wheel. The repair unit was still securely in place and tire remained leak-free.

You can repair small injuries in tubeless tires fast and easy with Tech Flow-Seal Inserts. Unique gray cushion gum flows into the injury and completely seals the inner liner as well as broken cord and cable ends. The insert permanently vulcanizes through the injury. The tire is immediately ready for use. Flow-Seal inserts are ideal for use in both bias and steel belted radial tires.

FLOW-SEAL INSERTS

204

206

Cat. No. 203 204 206 903 903RC 915 920 921

Description INSERT-O-MATE PLASTIC TIPS ROUND INSERTS, 2”, 50mm OVAL INSERTS, 2”, 50mm STEEL T-HANDLE CUTTER REPLACEMENT STEEL CUTTER SPIRAL CEMENT TOOL INSERT-O-MATIC TOOL PASSENGER REPLACEMENT NEEDLE

Box Qty. 20 40 40

915

920

921

FLOW-SEAL INSERTS Cat. No. 208 209 903 903RC 920 923

209

Description ROUND TRUCK INSERTS, 3¾”, 95mm OVAL TRUCK INSERTS, 3¾”, 95mm STEEL T-HANDLE CUTTER REPLACEMENT STEEL CUTTER INSERT-O-MATIC TOOL INSERT-O-MATIC TRUCK NEEDLE

Box Qty. 20 40

NOTE: When applying 208 and 209 inserts, the 923 truck needle must replace 921 needle which comes in a 920 Insert-O-Matic Tool. 920 923

FLOW-SEAL INSERTS Cat. No. 211 212 217 905 916

217

Description ROUND INSERTS, 7½”, 190mm OVAL INSERTS, 9”, 225mm GIANT OVAL INSERTS, 8¼”, 210mm HEAVY DUTY INSERT TOOL, 9”, 225mm GIANT SPIRAL CEMENT TOOL

Box Qty. 25 15 10

212

27

TECH Repair Kits

Tech offers an exciting array of repair kits, each designed for a specific repair application. Each kit contains all the necessary products to assure a complete, permanent repair.

NAILHOLE INSERTS & REPAIR KITS

MOTORCYCLE, ATV & TIRE REPAIR KITS No. 880 MOTORCYCLE TUBELESS TIRE REPAIR KIT for shop use, contains: n 1 Box – No. 249UL Uni-Seal Ultras n 1 Box – No. 250UL Uni-Seal Ultras n 1 – No. 261 Uni-Seal cutter n 1 – No. 704A Rub-O-Matic n 1 – No. 760 Chemical Vulcanizing Fluid n 1 – No. 915 spiral cement tool n 1 – No. 933 rubber scraper n 1 – No. 935 stitcher/buffer Packed in a heavy-duty plastic box with handle

880

No. 885 ATV REPAIR KIT contains: n 8 – No. 220 Permacure repairs n 2 – 16g CO2 cartridges* n Brass CO2 discharge fitting** n 1 – T-handle spiral cement tool with 883

No. 883 TUBELESS ON-THE-WHEEL ATV CONSUMER KIT contains: n 10 – No. 204 Flow-Seal Inserts n 1 – 10ml tube Vulcanizing Fluid n 1 – No. 900 insert tool No. 872 MOTOR KIT NO. 2 (not shown) contains: n 8 – No. 11 tube repairs n 2 – No. 12 tube repairs n 2 – No. 17 tube repairs n 1 – No. 18 tube repairs n 1 – 20ml tube Vulcanizing Fluid n 1 – metal buffer

insert needle n 1 – 10ml tube Tech Chemical

Vulcanizing Fluid n All in an easy carry pouch

885

*GC16 – 16g CO2 replacement cartridges available. **PSVA – Brass CO2 discharge fitting replacement available.

PERFORMANCE TIRE KIT No. 898 PERFORMANCE TIRE KIT. A complete kit for Uni-Seal repair of speed rated tire injuries from 1/8” (3mm) to ¼” (6mm), with tool box, contains: n 1 Box – No. 249UL Uni-Seal Ultras n 2 – No. S1046 Quick Change n 1 Box – No. 250UL Uni-Seal Ultras Adaptor for S893 and S2027 1 n 1 – No. 269 /8” (3mm) carbide n 1 – No. S893 1½” (40mm) texture cutter brush n 1 – No. 270P ¼” (6mm) carbide n 1 – No. RH140 contour wheel cutter n 1 – No. 910 cement tool n 1 – No. TRT105 Injury Measuring n 1 – No. 911 allen wrench for quick Tool adaptors n 1 – No. 704A Rub-O-Matic aerosol n 1 – No. 913 slip joint pliers n 1 – No. 738 Security Coat n 1 – No. 915 spiral cement tool n 1 – No. 760 Chemical Vulcanizing n 1 – No. 933 rubber scraper Fluid n 1 – No. 936 1/8” (3mm) stitcher n 1 – No. S1032 Air Buffer 2,600 n 1 Box – No. 951 white paint sticks, RPM with exhaust kit & quick chuck 12 pack n 1 – No. S1040 Quick Change n 1 – No. S923 safety glasses Adaptor for 270 carbide cutter n 1 – No. TK knife n 1 – No. S1043 Quick Change n 1 – No. RM-4 repair manual Adaptor for 269 carbide cutter n 1 – No. 111TM repair template

TRUCK NAIL HOLE REPAIR KIT No. 896 TRUCK NAIL HOLE REPAIR KIT. A complete kit for road service and repairing of nail holes in both radial and bias tires, with tool box, contains: n 1 Box – No. 170 (CT-20) radial repairs + n 1 – No. S892 3” (75mm) soft wire n 1 Box – No. 166 (CT-12HD) radial repairs brush n 1 Box – No. ULS8 (251-1UL) + n 1 – No. RH107 Rubberhog flared 5/16” (8mm) Uni-Seal Stems buffing wheel n 1 Box – No. ULS10 (291-1UL) + n 1 – No. RH152 Rubberhog flared 3/8” (10mm) Uni-Seal Stems buffing wheel + n 1 – No. 271 ¼” (6mm) carbide cutter + n 1 – No. 911 allen wrench for quick 3 + n 1 – No. 271/38 /8” (10mm) carbide cutter adaptors + n 1 – No. TRT105 Injury Measuring Tool + n 1 – No. 912 allen wrench for air tools n 1 – No. 704A Rub-O-Matic aerosol + n 1 – No. 913 slip joint pliers n 1 – No. 738 Security Coat + n 1 – No. 915 spiral cement tool n 1 – No. 760 Chemical Vulcanizing Fluid + n 1 – No. 919 pointed awl n 1 – No. S1032 Air Buffer 2,600 + n 1 – No. 933 rubber scraper RPM with exhaust kit & quick chuck n 1 – No. 936 1/8” (3mm) stitcher + n 1 – No. S1035 Air Drill 500 RPM + n 1 – No. 940 skiving knife with exhaust kit and quick chuck n 1 Box – No. 951 white paint sticks, + n 1 – No. S1041 Quick Change 12 pack Adaptor for 271 carbide cutter + n 1 – No. S923 safety glasses + n 1 – No. S1041/38 Quick Change n 1 – No. 170TM repair template for Adaptor for 271/38 carbide cutter 170 + n 2 – No. S1047 Quick Change n 1 – No. 170TM repair template Adaptor + n 1 – No. RM-5 repair manual

28

No. 896NHTK TRUCK NAIL HOLE (TOOLS ONLY) KIT. Contains all items marked above with a “+” and also: n 1 – No. 896 plastic tool box n 1 – No. 973 chrome vanadium n 1 – No. CP873K low speed tire diagonal pliers buffer with exhaust kit n 1 – No. 270 ¼” (6mm) carbide n 1 – No. 939 ¼” (6mm) stitcher cutter n 1 – No. RM-4 repair manual n 1 – No. S1040 Quick Change n 1 – No. ODEC5 5½” oval decal Adaptor for 270 carbide cutter

TECH Storage Cabinets and Professional Repair Tool Station TECH 100 LOCKING REPAIR CABINET Cat. No. 100

CABINETS & REPAIR TOOLS

Description The new Tech 100 Tire Repair Cabinet has been redesigned to better organize and secure all the Tech recommended products for proper tire repair. The cabinet features double locking front doors with Tech Tire Repair logos on the exterior, wider and taller shelves for increased repair storage capacity, and an additional exterior shelf with 4 cutouts for air tool storage. TOOLS AND REPAIR MATERIALS SOLD SEPARATELY. Dimensions: 30” x 24” x 11.5” (760mm x 610mm x 295mm) Weight: 27.5lbs. (12.45kg) Inner Door Labeled Tool Bars store: No. TRT105 Measuring Tool No. 933 Rubber Scraper No. RH140 Buffing Wheel No. 269, 270 & 271 Carbide Cutters No. S893 Wire Brush No. 910 Fluted Cement Tool No. 915 Spiral Cement Tool No. 913 Pliers No. 973 Diagonal Side Cutting Pliers No. 938 Stitcher

n n n n n n n n n n

TECH 500 PROFESSIONAL REPAIR TOOL STATION Cat. No. 500

Description Tech’s 500 Repair Station is recommended for any full service repair facility. This tool organizer neatly stores all the recommended knives, buffing rasps and wheels, texture brushes, encapsulated brushes, carbide burrs, and aluminum oxide stones for the full range of radial and bias tire repairs. Repair templates or chemicals can be stored inside. The box now comes assembled with optional air tool hanging bracket and mounting hardware included. TOOLS AND REPAIR MATERIALS SOLD SEPARATELY. Dimensions: 15” x 12” x 12” Weight: 10.5lbs., 4.8kg

AIR TOOLS & RETREAD TOOLS Cat. No. S999

410SV

Description QUICK SPIFF AIR POWERED VACUUM Self contained one piece vacuum comes with 16”, 400mm hose, 3”, 75mm dust brush and 9”, 225mm crevice tool. SAFETY BLOW GUN, 150 psi max. pressure

S999

410SV

29

TECH Hand Tools for Tire Repair

Tech tools and accessories are made of the highest quality materials and are designed to make your tire repair job easier and faster.

STITCHERS AND SCRAPERS

CABINETS & REPAIR TOOLS

Cat. No. 933 935 936 938 939

Description RUBBER SCRAPER STITCHER/BUFFER STITCHER, 1½”, 38mm x 1/8”, 3mm STITCHER, 1½”, 38mm x 1/32”, 0.8mm STITCHER, 2”, 50mm x ¼”, 6mm

933 939 935

936 938

INSERT TOOLS Cat. No. 900 901 905 920 921 923

920

Description INSERT TOOL, 3”, 75mm INSERT TOOL, 6”, 150mm HEAVY DUTY INSERT TOOL, 9”, 225mm INSERT-O-MATIC TOOL PASSENGER REPLACEMENT NEEDLE INSERT-O-MATIC TRUCK NEEDLE

921

900 901

923 905

MISCELLANEOUS TIRE REPAIR TOOLS Cat. No. 913 973 931 949 966

973 931

Description SLIP JOINT PLIERS, 8”, 200mm DIAGONAL PLIERS, 6”, 150mm WIRE BUFFER for rim/battery terminal CRAYON HOLDER, designed to fit Tech’s hex tire paint marking crayons 966 WHITEWALL CLEANING BRUSH with brass bristles 974 INNERLINER BRUSH with stainless steel bristles SIP SILVER INK PEN, 12 per box TRT105 COLOR CODED INJURY MEASURING TOOL

913 974 SIP

TRT105 949

AWLS AND PACKING TOOLS Cat. No. 910 915 918 919 985 986 918 915 910

30

985 986 919

Description 3” CEMENT TOOL with polypropylene handle SPIRAL CEMENT TOOL DUCK BILL AWL, 4”, 100mm length POINTED AWL, 8”, 200mm length (screwdriver-style handle) SKIVE PACKING TOOL, 2”, 50mm x ¼”, 6mm SKIVE PACKING TOOL, 2”, 50mm x 3/8”, 10mm

TECH Knives, Extruder Guns & Branding Irons

Tech tools and accessories are made of the highest quality materials and are designed to make your tire repair job easier and faster. Tech also offers a complete line of air buffers and accessories. Tech Extruder Guns are designed to fill a wide range of injuries quickly and easily without trapping air. Perfect for section repair build-up and for filling skives. Extruder Guns are compact, lightweight and user friendly. Available in 110V or 220V. Tech Electric Knife Heater is ideal to heat rubber cutting knives, shears and small tools that require heat for efficient operation. The accompanying Heater Knife comes with an 8”, 200mm blade for fast, easy trimming and cutting of rubber. The Tire Brander allows retreaders and tire technicians to quickly and easily brand tires for proper identification. 1/2”, 13mm characters (letters and numbers) and 1/4”, 6mm characters are available for use with the brander. CABINETS & REPAIR TOOLS

SKIVING KNIVES & SCISSORS Cat. No. 940 941 942 SS10

Description X2T TAPER SKIVING KNIFE X1Y EXTRA CURVE SKIVING KNIFE X3N ROUND POINT FLEXIBLE SKIVING KNIFE HEAVY DUTY RETREAD SCISSORS 5”, 125mm cut

Pkg. Qty. 1 1 1 1

SS10 942 940 941

BUTYL RETREAD ENVELOPE REPAIR SYSTEM (ERS) Cat. No. 672 772

Description ERS-45 ENVELOPE REPAIR UNITS 1¾”, 45mm diameter, 50 ct. tub ENVELOPE VULCANIZING FLUID, 8 oz., 235ml can

772 672

TECH EXTRUDER GUNS Cat. No. S180* S182*

Description NAIL HOLE REPAIR EXTRUDER GUN, 110V STANDARD EXTRUDER GUN, 110V

*Available in 220V as special order only. Parts/Service and Loaner programs available. S182

S180

RETREAD TOOLS & ACCESSORIES Cat. No. Description MH26470 ELECTRIC KNIFE HEATER, 115V, 350 watt rated, max. temperature 820ºF, 437ºC HN8 INSULATED HEATER KNIFE, 8”, 200mm blade 1612 TIRE BRANDER, 120V. (To order characters, letters and numbers, see information below) Characters (letters and numbers) for the Brander can be ordered by using the following examples:

1612

MH26470 Brander characters, letters, numbers HN8

You order: 1612A 16 = Number for Brander 12 = ½” letters or numbers A = ½” letter A

You order: 16148 16 = Number for Brander 14 = ¼” letters or numbers 8 = ¼” number 8

You order: 1614A 16 = Number for Brander 14 = ¼” letters or numbers A = ¼” letter A

31

MARKAL PRODUCT PAGES

Tire Inspection Marking Tools At Tech, we partner with manufacturers who have as much pride and quality in their product as we do. Tech is proud to offer high-quality, high-performance Markal products to our customers at the very highest level of service. For over 75 years, Markal has designed and manufactured high-quality, performance based products for their, and our, customers' unique applications.

Markal brand is the global leader in high-performance, handheld industrial marking products. From their manufacturing locations in Elk Grove Village, IL, USA and Blyes, France, Markal produces and sells high-performance industrial markers for many industries, including tire and wheel repair. Today, Markal-branded products are sold around the world in over 60 countries.

Trades-Marker Mechanical Marker Pencil

TRADES-MARKER® Mechanical Marker Pencil has the marking versatility of a paper-wrapped grease pencil combined with simple, one-handed push-button advance that helps reduce cost and waste. This refillable, all-surface marker leaves a wearresistant mark and is safe for all surfaces. Convenient clip allows for pocket storage and prevents rolling off work table.

®

TRADES-MARKER® MECHANICAL MARKER PENCIL Cat. No. 946W 946Y

Description TRADES-MARKER® WHITE Mechanical Marker Pencil with 12 refills TRADES-MARKER® YELLOW Mechanical Marker Pencil with 12 refills

Qty. Ea. Ea.

946Y

Quik Stik Mini Twist Paint Marker ®

The Markal Quik Stik® Mini Twist Paint Marker is a compact solid paint marker in a convenient twist-up, plastic holder that is ideal for finer line marking on smooth or rough surfaces. This smaller version of the Markal® Quik Stik stores easily in a pocket or tool belt and easily advances with the turn of a knob, allowing for full use of the marker. The high-performance paint dries quickly to leave bold, permanent marks on most surfaces. MARKAL QUIK STIK® MINI TWIST PAINT MARKER

947W

947Y

32

Cat. No. 947W 947Y

Description QUIK STIK® WHITE Mini Twist Paint Marker QUIK STIK® YELLOW Mini Twist Paint Marker

Box Qty. 12 12

Tire Inspection Marking Tools B Paintstik Solid Paint Marker ®

MARKAL PRODUCT PAGES

Markal's most versatile and economic marker, the original B Paintstik Solid Paint Marker combines the durability of paint in the convenience of a crayon. The real paint formula has superior marking performance on oily, icy, wet, dry or cold surfaces and is weather- and UV-resistant. This Paintstik works on rough, rusty, smooth, or dirty surfaces. B PAINTSTIK® SOLID PAINT MARKER

951

951Y

Cat. No. 948 948Y 951 951Y

Description B PAINTSTIK® WHITE Solid Paint Marker B PAINTSTIK® YELLOW Solid Paint Marker B PAINTSTIK® HEX WHITE Solid Paint Marker B PAINTSTIK® HEX YELLOW Solid Paint Marker

Box Qty. 12 12 12 12

948Y

TYRE MARQUE® Cat. No. 950

948

950W 950

Description TYRE MARQUE® YELLOW Solid Paint Crayon, marks easily on wet or cold rubber surfaces for bold, visible marks TYRE MARQUE® WHITE Solid Paint Crayon, marks easily on wet or cold rubber surfaces for bold, visible marks

Box Qty. 12 12

CHINA MARKER 950W 96010

Anti-Seize Compound

Cat. No. 96010

Description CHINA MARKER WHITE, paper wrapped grease pencil for smooth writing on most surfaces. Moisture resistant. No sharpening required.

Box Qty. 12

EZ BREAK® ANTI-SEIZE COMPOUND – COPPER GRADE This copper-based anti-seize and lubricating compound is recommended for coating nuts, bolts, valves, flanges, and splines for easy break out after years of service. Resists rust and corrosion. Meets Military Specification Mil-A-907E. Authorized by USDA for use in federally inspected meat and poultry plants.

EZ BREAK® ANTI-SEIZE COMPOUND – COPPER GRADE Cat. No. 418-08907 418-08910

418-08910

Description EZ BREAK® ANTI-SEIZE COMPOUND 16 oz. Brush in Cap EZ BREAK® ANTI-SEIZE COMPOUND 10 oz. Brush in Cap

Case Qty. 24 24

418-08907

33

TECH Worker Safety & Protection Items REPAIR LIGHT & EYE PROTECTION

S1055N

S925

Cat. No. Description S1055N FLUORESCENT REPAIR LIGHT 110V only, 25 ft., 7.5m power cord S918 SAFETY GLASSES, fit over most prescription eyeglasses S920 SAFETY GOGGLES, side top and breathing vents S923 SAFETY GLASSES, clear lenses with padded spatula temples for comfort. Meets ANSI standards. S924 SAFETY GLASSES, gray shaded lenses with padded spatula temples for comfort. Meets ANSI standards. S925 CHEMICAL SPLASH & CUTTING GOGGLES, with blue translucent flexible frames & clear anti-fog lens S1056 REPLACEMENT FLUORESCENT BULB for S1055N

S923

SAFETY, PROTECTION & HAND CLEANING PRODUCTS

S924

LATEX, NITRILE AND STRONGHOLD GLOVES Cat. No. EP2244 EP2245 EP5644 EP5645 EP6644 EP6645 EP8544 EP8545 EP10044 EP10045

Description DURA-GRIP LATEX GLOVES, LG, 8 mil DURA-GRIP LATEX GLOVES, XL, 8 mil NITRILE GLOVES, LG, 4 mil NITRILE GLOVES, XL, 4 mil NITRILE PLUS GLOVES, LG, 8 mil NITRILE PLUS GLOVES, XL, 8 mil STRONGHOLD GLOVES, LG, pair STRONGHOLD GLOVES, XL, pair BLACK GOLD NITRILE GLOVES, LG, 6 mil BLACK GOLD NITRILE GLOVES, XL, 6 mil

Box Qty. 100 100 100 100 50 50 1 1 100 100

EP10044 EP5644

EP8545

TECH Cleaning Products HAND CLEANERS

730C

743

730

732 731

34

732C

Cat. No. Description 730 TECH MEDICATED HAND CLEANER, 4.5 lb., 2.05kg can 730C TECH CITRUS MEDICATED HAND CLEANER, 4.5 lb., 2.05kg can 731 DISPENSER for 730 and 732 Hand Cleaner cans 732 TECH PUMICE HAND CLEANER, 4.5 lb., 2.05kg can 732C TECH CITRUS PUMICE HAND CLEANER, 4.5 lb., 2.05kg can 743 TECH SOY HAND CLEANER, 72 oz., 2125ml 743SP TECH SOY HAND CLEANER STARTER KIT, Dispenser Pump and 72 oz., 2125ml Soap

TECH Air Tools & Accessories

DRILLS, BUFFERS & AIR HAMMERS Cat. No. CP871 *CP871K CP873 CP873K CP9288

S1035

CP9288 S1037

S1035

S1036 S1045

S1037 S1039 SLP6550

CP873K

SLP6550

CP871K

S1039

AIR TOOLS & ACCESSORIES

S1010C S1010K S1045

S1036

Description HIGH SPEED TIRE BUFFER HIGH SPEED TIRE BUFFER with exhaust kit LOW SPEED TIRE BUFFER LOW SPEED TIRE BUFFER with exhaust kit 12” HEAVY DUTY PISTOL DRILL, .5 hp (380W) motor, high torque, keyless chuck 500 RPM REVERSIBLE DRILL excellent for removing damaged rubber and steel. Complete with quick change chuck and exhaust kit. For use with carbide cutters 269-272, max. 90 psi. LOW RPM GEAR HEAD REAR EXHAUST AIR BUFFER Ideal for preparing all rubber surfaces. 4000 max. rpm at 90 psi. Threaded arbor 3/8”, 24 thread. Optional S1037 rear exhaust kit available. Chuck and key sold separately. REAR EXHAUST KIT for use with S1032, S1035, S1036, S1039 and SLP6550 HIGH RPM REAR EXHAUST AIR BUFFER Excellent for preparing steel cables. 22000 max. rpm at 90 psi. Threaded arbor 3/8”, 24 thread. Optional S1037 rear exhaust kit available. Chuck and key sold separately. JACOBS CHUCK for S1036 and S1039 CHUCK KEY for S1036 and S1039 QUICK CHANGE CHUCK for S1036 and S1039. Fits 3/8”, 24 thread spindle. 3500 RPM HIGH TORQUE SKIVING AIR BUFFER Threaded arbor 3/8” with quick chuck. Made in U.S.A.

ADAPTORS, CHUCKS & ACCESSORIES Cat. No. S1040 S1041 S1041/38 S1040

S1041

S1043

S1044

S1046

S1043 S1044 S1046

S1047

S1047XL

S1048

S1049

S1046D S1047 S1047XL

S1048 S1049

Description QUICK CHANGE ADAPTOR for No. 270 and No. 270P carbide cutters. For use in S1045 quick change chuck. QUICK CHANGE ADAPTOR for No. 271 and No. 271P carbide cutters. For use in S1045 quick change chuck. QUICK CHANGE ADAPTOR designed to accept a No. 271/38 and No. 272 carbide cutter. (not shown) Use 912 Allen Wrench for tightening. (not shown) 1/8” QUICK CHANGE ADAPTOR permits use of tools with 1/8”, 3mm shank to be adapted to S1045 chuck. ¼” QUICK CHANGE ADAPTOR permits use of tools with ¼”, 6mm shank to be adapted to S1045 chuck. QUICK CHANGE SHORT ADAPTOR 3/8”, 24 thread. One flat washer, one nut included. ½”, 13mm thread length. QUICK CHANGE ADAPTOR for RSB-3 brush. (not shown) QUICK CHANGE LONG ADAPTOR 3/8”, 24 thread. One flat washer, one nut included. 1”, 25mm thread length. QUICK CHANGE EXTRA LONG ADAPTOR 3/8”, 24 thread. One flat washer, two nuts included. 1¾”, 45mm thread length. For rasps, buffing wheels & brushes where extra length is required. DRILL CHUCK SHORT ADAPTOR 3/8”, 24 thread. 1½”, 40mm thread length. For use with S1010 drill chuck. DRILL CHUCK LONG ADAPTOR 3/8”, 24 thread. 2¾”, 70mm thread length. Two nuts included. For use with S1010 drill chuck.

FP-755

AIR TOOLS & ACCESSORIES Cat. No. S990

S991 S992 S1032 FP-708

S1032

*FP-708

*FP-755

S991 S992

S990

Description RAPID ACTION AIR HAMMER recommended tool for agricultural, truck and OTR repair installation. Develops 3,700 strikes per minute at 90 psi. Comes with safety chuck holder. REPLACEMENT SAFETY CHUCK HOLDER REPAIR INSTALLATION HAMMER ½”, 15mm diameter LOW RPM GEAR HEAD REAR EXHAUST AIR BUFFER Ideal for preparing all rubber surfaces. Three gear head produces 2600 max. rpm at 90 psi. Complete with exhaust hose and quick change chuck. HIGH RPM, REAR EXHAUST AIR BUFFER Excellent for preparing steel cables. 20,000 max. rpm at 90 psi. Complete with Jacobs chuck exhaust kit. LOW RPM, GEAR HEAD REAR EXHAUST AIR BUFFER ideal for preparing all rubber surfaces. 4500 max. rpm at 90 psi. Threaded arbor 3/8”, 24 thread. Optional S1037 rear exhaust kit available.

*DENOTES SPECIAL ORDER ITEM

35

TECH Carbide Cutters, Carbide Burrs & Grinding Stones for Steel Cables

Tech diamond-cut Carbide Cutters and Burrs are innovative skiving tools. They are used to remove damaged steel cables and loose wire in radial tires and are a quick and efficient way to minimize the size of the injury. Sherbo buffing stones for steel constructed tires are used to remove all loose steel wire around a tire injury. Stones are aluminum oxide hardbound 60-grit, mounted on steel shafts. SMALL CARBIDE CUTTERS FOR SMALL PASSENGER AND LIGHT TRUCK TIRES ONLY

270P

Cat. No. *269 *270P *271P TRT105

269

271P

TRT105

Description CARBIDE CUTTER, 3”, 75mm length, for 1/8”, 3mm injuries CARBIDE CUTTER, 2”, 50mm length, for ¼”, 6mm injuries CARBIDE CUTTER, 3”, 75mm length, for 5/16”, 8mm injuries COLOR CODED INJURY MEASURING TOOL

*1200 RPM maximum CAUTION: Always wear eye protection.

CARBIDE CUTTERS Cat. No. Description *270 CARBIDE CUTTER, 3”, 75mm length, for ¼”, 6mm injuries *271 CARBIDE CUTTER, 4”, 100mm length, for 5/16”, 8mm injuries *271/38 CARBIDE CUTTER, 4”9/16, 120mm length, for 3/8”, 10mm injuries *272 CARBIDE CUTTER, 5”, 125mm length, for ½”, 13mm injuries *1200 RPM maximum

AIR TOOLS & ACCESSORIES

272

271/38

271

CARBIDE CUTTER KIT 270 275 CAUTION: Always wear eye protection.

No. 275 CARBIDE CUTTER KIT contains:  1 – No. 270 Carbide Cutter with S1040 Adaptor. Cutter diameter ¼”, 6mm  1 – No. 271 Carbide Cutter with S1041 Adaptor. Cutter diameter 5/16”, 8mm  1 – No. 271/38 Carbide Cutter with S1041/38 Adaptor. Cutter diameter 3/8”, 10mm  1 – No. 272 Carbide Cutter with S1041/38 Adaptor. Cutter diameter ½”, 13mm Above adaptors to be used with S1045 Quick Change Chuck

DIAMOND-CUT BURRS Cat. No. 280

286

282

284

283 283

284 284C

282

286 280 CAUTION: Always wear eye protection.

Description MINI POINTED CARBIDE BURR 1¼”, 30mm length POINTED END CARBIDE BURR 2”, 50mm length MINI-ROUTER CARBIDE BURR 1½”, 40mm length ROUTER CARBIDE BURR, 2½”, 65mm length COARSE-CUT ROUTER CARBIDE BURR 2½”, 65mm length (not shown) BALL-SHAPED CARBIDE BURR 2¾”, 70mm length, ¾”, 20mm diameter

Shaft Size 1/8”, 3mm ¼”, 6mm 1/8”,

3mm

¼”, 6mm ¼”, 6mm ¼”, 6mm

NOTE: When using Cat. Nos. 280, 282, 283, 274C and 286, a buffer achieving 20,000 to 30,000 RPM will produce the best results.

ALUMINUM OXIDE STONES Cat. No. S870 S872 S879

S872S

S873 S872

S873 S874 S875 S874

S870

CAUTION: Always wear eye protection.

36

S875 S879

Description MINI-PENCIL STONE, 7/16”, 10.5mm, mounted on a 1/8”, 3mm shaft PENCIL STONE, 11/16”, 25mm long 5/16”, 8mm width SMALL PENCIL STONE, 11/16”, 25mm long ¼”, 6mm width (not shown) MUSHROOM STONE, 15/8”, 40mm diameter, mounted on a ¼”, 6mm shaft MINI MUSHROOM STONE, ½”, 13mm x ¼”, 6mm mounted on a 1/8”, 3mm shaft CONICAL STONE, 11/8”, 20mm x ¾”, 20mm wide mounted on a ¼”, 6mm shaft MUSHROOM STONE, 1¼”, 30mm diameter, mounted on a ¼”, 6mm shaft

Max. RPM 30,000 47,000 47,000 23,500 30,000 33,500 30,500

RUBBERHOG Tire Repair Tools ®

RubberHog wheels and rasps feature SSG coatings which provide a uniform surface texture for maximum adhesion. Flared Contour Wheels are designed so that the technician can keep a large area of the tool in contact with the tire, resulting in a more even buffed surface. 5,000 RPM maximum. FLARED CONTOUR WHEELS Proven Rubberhog widely-flared shapes are versatile for both interior and exterior buffing. Flared contour wheels remove material quickly while providing a superior bonding surface, or exterior cosmetics.

RH118-3/8

RH122

RH120

RH100

RH109

RH102

RH111

RH107

CAUTION: Always wear eye protection.

Diameter 1¾”, 44.4mm 2”, 50.8mm 2”, 50.8mm 2½”, 63.1mm 2½”, 63.1mm 2½”, 63.1mm 3”, 76.2mm 3”, 76.2mm 3”, 76.2mm 3½”, 88.9mm 3½”, 88.9mm 3½”, 88.9mm 4”, 101.6mm

Width ¾”, 19mm ¾”, 19mm ¾”, 19mm 11/16”, 26.9mm 11/16”, 26.9mm 11/16”, 26.9mm 1¼”, 31.7mm 1¼”, 31.7mm 1¼”, 31.7mm 1½”, 38.1mm 1½”, 38.1mm 1½”, 38.1mm 1½”, 38.1mm

Bore 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm ¾”, 19mm 3/8”,

Coating 170 - Fine 170 - Fine 230 - Medium 170 - Fine 230 - Medium 390 - Coarse 170 - Fine 230 - Medium 390 - Coarse 170 - Fine 230 - Medium 390 - Coarse 390 - Coarse

AIR TOOLS & ACCESSORIES

RH104

RH129P

Cat. No. Mfg. No. RH100 100 RH102 130-170 RH104 130-230 RH107 107 RH109 109 RH111 111 RH112 112 *OLVRH114 114 *OLVRH116 116 RH118-3/8 118 RH120 120 RH122 122 *RH129P 129

LOW-PROFILE BUFFING WHEEL Unique design allows buffing in low profile tires without risking sidewall damage. Cat. No. RH140

Mfg. No. 140

Diameter 1¼”, 31.7mm

Width ¾”, 19mm

3/8”-

Bore 24 Thread

Coating 170 - Fine

RH140 CAUTION: Always wear eye protection.

POLY PLUGS FOR FLARED CONTOUR WHEELS Poly Plugs easily fit inside Contour Wheels, compensating for mounting inaccuracies. Reuseable Poly Plugs improve wheel life and reduce vibration for smoother, quieter, more comfortable operation.

RH156

RH152

Cat. No. RH152 RH154 RH156

Mfg. No. 152 154 156

Diameter 2½”, 63.1mm 3”, 76.2mm 3½”, 88.9mm

Bore 9.5mm 3/8”, 9.5mm 3/8”, 9.5mm 3/8”,

RH154 CAUTION: Always wear eye protection.

BUZZOUT WHEELS With a fully-rounded profile, buzzout wheels are free cutting and long lasting. Buzzout wheels are excellent for bias tires, and used for skiving on high-tread radial tires. Not recommended for contact with steel cord.

RH308

RH300

RH310

RH302

RH312

RH304

RH314

RH306

Cat. No. RH300 RH302 RH304 RH306 RH308 RH310 RH312 RH314

Mfg. No. 300 302 304 306 308 310 312 314

Diameter 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm 2”, 51.8mm

Width ¼”, 6.3mm ¼”, 6.3mm 3/8”, 9.5mm 3/8”, 9.5mm ½”, 12.7mm ½”, 12.7mm ¾”, 19mm ¾”, 19mm

Bore 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”- 24 Thread 3/8”-

Coating 230 - Medium 390 - Coarse 230 - Medium 390 - Coarse 230 - Medium 390 - Coarse 230 - Medium 390 - Coarse

CAUTION: Always wear eye protection.

*DENOTES SPECIAL ORDER ITEM

37

RUBBERHOG Tire Repair Tools ®

Rubberhog features innovations from the leader in the industry. The Rubberhog Original SSG coating uses the best technology to ensure peace of mind.

• Buffs cooler, no scorching • Fantastic wear life, costing you less per repair • Better surface texture for a safer bond • Faster material removal, for a quicker repair

TAPERED CONES, BALLS, PENCIL RASP, ROTOR SAW, 1/4” SHAFT

RH601

RH611

RH603

RH619

RH613

RH626

AIR TOOLS & ACCESSORIES

CAUTION: Always wear eye protection.

Cat. No. RH601 RH603 RH605 RH611 RH613 RH619 RH626

Mfg. No. Shape Diameter 5/8”, 15.8mm 601 Sphere 7/8”, 22.2mm 603 Sphere 605 Sphere 11/8”, 28.5mm 5/8”, 15.8mm 611 Taper 7/8”, 22.2mm 613 Taper 619 Rotor Saw 13/8”, 34.9mm 626 Nail Hole Reamer ¼”, 6.3mm

Head Length 5/8”, 15.8mm 7/8”, 22.2mm 11/8”, 28.5mm 1”, 25.4mm 1¼”, 31.7mm ¼”, 6.3mm 3”, 76.2mm

Coating 330 - Coarse 330 - Coarse 330 - Coarse 330 - Coarse 330 - Coarse 330 - Coarse 330 - Coarse

RETREADING SIDEWALL WHEELS Cat. No. *OLVRH707-50 RH708

RH708 *OLVRH708-50

OLVRH708-50

Mfg. No.

Shape

Diameter

Width

I.D.

Coating

707-50

Donut Wheel

6”, 152.4mm

1”, 25.4mm

50mm

460 - Med. Coarse

708

Donut Wheel

6”, 152.4mm

1”, 25.4mm

1½”, 38.1mm

390 - Coarse

708-50

Donut Wheel

6”, 152.4mm

1”, 25.4mm

50mm

390 - Coarse

OLVRH707-50 CAUTION: Always wear eye protection.

KUTZALL KIT, CAT. NO. RH635, 4-PIECE 1/8” SHAFT REPAIR KIT contains: Cat. No. RH635

Mfg. No. 635

Shape Long Taper Short Taper Sphere Rotor Saw

Diameter 3.1mm ¼”, 6.3mm 3/8”, 9.5mm ¾”, 19mm 1/8”,

Head Length ¾”, 19mm ½”, 12.7mm 3/8”, 9.5mm 1/8”, 3.1mm

Coating 170 - Fine 170 - Fine 170 - Fine 170 - Fine

RH635

CAUTION: Always wear eye protection.

RADIAL SKIVE BRUSHES Cat. No. RSB3

S1046D

RSB3E S1046D

RSB3E

Description RADIAL SKIVE BRUSH, 3”, 75mm diameter, fits ½”, 13mm or 3/8”, 10mm arbors PLASTIC ENCAPSULATED BRUSH, same as RSB3 DUAL QUICK CHANGE ADAPTOR, 3/8”, 10mm diameter

RSB3 CAUTION: Always wear eye protection.

ROTARY KNIFE BLADES Cat. No.

Mfg. No.

*RH100-GEG-134-80 100-GEG-134-80 *RH100-GEG-138-80 100-GEG-138-80 *RH100-GEG-200-80 100-GEG-200-80

Shape

Diameter

Bore

Coating

Rotary Knife

6”, 152.4mm

1¾”, 44.4mm

80 Grit

Rotary Knife

6”, 152.4mm

13/8”, 34.9mm

80 Grit

Rotary Knife

6”, 152.4mm

2”, 50.8mm

80 Grit

RH100-GEG-200-80

RH100-GEG-134-80

RH100-GEG-138-80 CAUTION: Always wear eye protection.

38

*DENOTES SPECIAL ORDER ITEM

TECH Buffing Wheels, Tungsten Carbide Rasps & Cups

Sherbo tungsten carbide buffing wheels and cups have an aircooled design which permits faster, cooler and cleaner buffing and helps eliminate the burning of rubber.

WHEELS Cat. No. Description S1009 BC-2 WHEEL, a 2”, 50mm diameter wheel for tube repairs and light work. 5000 RPM max. S1011 BC-1 WHEEL, a 2½”, 65mm diameter wheel for tube repairs and light work. 5000 RPM max. S1011-1 TWO BC-1 WHEELS (S1011) placed back-to-back with S1049 threaded arbor adaptor. 5000 RPM max. S2032 NO. 60 HB NICKEL CHROMIUM BUFFING WHEEL designed to outlast copper colored wheels. For texturizing of tubes and innerliners. 2½”, 65mm diameter, 3/8”, 10mm arbor hole. 5000 RPM max.

S1011-1

S2032

S1011

S1009 CAUTION: Always wear eye protection.

AIR TOOLS & ACCESSORIES

ROUND FACED RASPS

S2000

S2001

Cat. No. S2000 S2001 S2002 S2003 S2004 S2005 S2204

S2002

Ø or Length 2”, 50mm 2”, 50mm 2”, 50mm 2”, 50mm 2”, 50mm 2”, 50mm 2”, 50mm

Width ¼”, 6mm ¼”, 6mm ½”, 13mm ½”, 13mm ¾”, 20mm ¾”, 20mm 1/8”, 3mm

Hole 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”,

Grit 16 36 16 36 16 36 16

The maximum speed for items S2000 through S2204 is 5000 RPM.

S2003

S2004

S2005

S2204

CAUTION: Always wear eye protection.

PENCIL RASPS, TAPERED CONE RASPS Cat. No. S2006 S2007 S2008 S2009 S2010 S2011

Ø or Length 2½”, 65mm 2½”, 65mm 4”, 100mm 4”, 100mm 2”, 50mm 2”, 50mm

Width ¼”, 6mm ¼”, 6mm ¾”, 20mm ¾”, 20mm 1”, 25mm 1”, 25mm

Hole – – 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread 3/8”, 24 thread

Grit 16 36 16 36 16 36

The maximum speed for items S2006 through S2011 is 5000 RPM.

S2006 S2007

S2008

S2009

S2010

S2011

CAUTION: Always wear eye protection.

CONTOUR CUPS

S2022

S2023

Cat. No. S2020 S2021 S2022 S2023 S2027

Ø or Length 3”, 75mm 3”, 75mm 4”, 100mm 4”, 100mm 2”, 50mm

Width 1½”, 40mm 1½”, 40mm 1½”, 40mm 1½”, 40mm ¾”, 20mm

Hole 10mm 3/8”, 10mm ½”, 13 mm ½”, 13 mm 3/8”, 10mm 3/8”,

Grit 36 60 36 60 60

The maximum speed for items S2020 through S2027 is 5000 RPM. The use of an S2047 (page 41) is necessary when using S2022 and S2023 with quick change adaptors.

S2020

S2027

S2021

S2027 designed with non-aggressive grit for passenger tire inner liner and tube buffing.

CAUTION: Always wear eye protection.

39

TECH Wire Brushes

Tech's encapsulated wire brushes are a critical component to performing section repairs. These brushes can be used to remove rubber surrounding steel cables, allowing damaged steel to be removed without creating excess scorch. Tech's S892 cleaning brush includes two 3”, 75mm soft brushes to be configured between two 2”, 50mm flat washers (also included), providing a durable and effective tool for cleaning buffed surfaces while leaving an excellent texture. ENCAPSULATED WIRE BRUSHES

S890

Cat. No. Description S890 POLYURETHANE ENCAPSULATED BRUSH to remove rubber around steel cables. 2”, 50mm diameter, 5,000 rpm max. ½”, 13mm arbor hole with 3/8”, 10mm reducer. S891 POLYURETHANE ENCAPSULATED BRUSH to remove rubber around steel cables. 3”, 75mm diameter, 5,000 rpm max. ½”, 13mm arbor hole with 3/8”, 10mm reducer. S897 RUBBER ENCAPSULATED BRUSH to remove rubber around steel cables. 2”, 50mm diameter, 5,000 rpm max. ½”, 13mm arbor hole with 3/8””, 10mm reducer. S898 RUBBER ENCAPSULATED BRUSH to remove rubber around steel cables. 3”, 75mm diameter, 5,000 rpm max. ½”, 13mm arbor hole with 3/8”, 10mm reducer.

S897

S898

AIR TOOLS & ACCESSORIES

S891

WIRE BRUSHES Cat. No. Description S892 TEXTURE BRUSH, contains (2) 3”, 75mm brushes and (2) 2”, 50mm flat washers to keep bristles firm. 5,000 rpm max. S893 SOFT WIRE TEXTURE BRUSH, 1½”, 40mm diameter. Ideal for cleaning buffed surfaces in passenger tire nailhole repairs and feathering loose inner liners. 5,000 rpm max. S894 RIM CLEANING BRUSH, 2”, 50mm. 5,000 rpm max. S896 SKIVE BRUSH removes scorched rubber in injury channel. ½”, 13mm, .005 wire. 5,000 rpm max.

S892

S896 S893

TECH Buffing Stones

S894

Buffing stones are recommended for buffing the inside of bias tube type tires with very little rubber covering body cord material. These stones produce the desired texture without damaging exposed fabric.

BUFFING STONES Cat. No. Description S946 BUFFING STONE, 4” x 1¼”, 100mm x 30mm, 46 grit, ½”, 13mm arbor hole, 4,200 rpm max. S947 BUFFING STONE, 3” x 1¼”, 75mm x 30mm, 46 grit, 3/8”, 10mm arbor hole, 5,000 rpm max.

S946

S947

CAUTION: Always wear eye protection.

40

B&J Rotary Gouges

Lightweight construction and cooler running design enhances the performance and life of these B&J rubber cutting gouges. The razor-like surface quickly removes large quantities of rubber. Fast and easy rubber removal design minimizes operator fatigue and permits better control. GOUGES

S2040

S2043

S2042

S2046

S2047

S2045

Cat. No. Description S2040 ROTARY GOUGE, 2”, 50mm diameter, ½”, 15mm arbor hole. 1 per box S2042 THIN WALL ROTARY GOUGE, 2”, 50mm diameter, 3/8”, 10mm arbor hole, no notch. 2 per box S2043 THIN WALL ROTARY GOUGE, 2”, 50mm diameter, 3/8”, 10mm arbor hole, with notch. 2 per box S2045 ROTARY GOUGE, 1¼”, 30mm diameter, 3/8”, 10mm arbor hole. 3 per box S2046 MICRO ROTARY GOUGE, ¾”, 20mm diameter, 3/8”, 10mm threaded arbor hole. 4 per box S2047 ½”, 15mm to 3/8”, 9mm REDUCER

CAUTION: Always wear eye protection.

B&J Squiggly Tool

B&J Squiggly Tool replaces 2” x 3/8” and ½” carbide gritted wheels for fast rubber removal with less heat buildup, lighter weight and easier control.

Cat. No. S2020-104

S2020-101

S2020-101

AIR TOOLS & ACCESSORIES

SQUIGGLY TOOL Description 24 BLADES, 2 SUPPORT PLATES 2”, 50mm with 3/8”, 10mm bore SUPPORT PLATES, each

S2043

S2020-104

CAUTION: Always wear eye protection.

Piranha Rasps

CUTCO PIRANHA BUFFING RASPS Cat. No. SP204/16 SP204/36 SP208/16 SP208/36

SP208/16

Description Diameter FLAT FACE RASP 2” FLAT FACE RASP 2” FANNED FACE RASP 2” FANNED FACE RASP 2”

Width 3/16” 3/16” ½” ½”

Grit Size 16 36 16 36

Qty. Ea. Ea. Ea. Ea.

SP204/16

Cut Off Wheels

CUT OFF WHEELS Cat. No. *TMRCW1-50 *TMRCW2-10 *TMRCW5-50 *TMRCW10-50 *TMRCW15-50

Description CUT OFF WHEEL CUT OFF WHEEL CUT OFF WHEEL CUT OFF WHEEL CUT OFF WHEEL

Size 3” x 1/16” x 3/8” 2” x 1/16” x 3/8” 3” x 1/32” x 3/8” 3” x 3/32” x 3/8” 4” x 3/32” x 3/8”

Box Qty. 50 10 50 50 50

*Denotes special order item TMRCW2-10

USE WITH THE FOLLOWING CHUCK ADAPTORS:

TMRCW1-50

Cat. No. S1048 S1049

Description DRILL CHUCK SHORT ADAPTOR, 1½”, 40mm. 3/8”, 24 thread DRILL CHUCK LONG ADAPTOR, 2¾”, 70mm. 3/8”, 24 thread. Two nuts included.

41

MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

TECH Monaflex Vulcanizing Systems

Monaflex vulcanizing systems for passenger, truck, agricultural, and OTR tires produce the ultimate tire repair when used with Tech tire repair units. Monaflex equipment is extremely portable, providing the option of distortion free section repairs in a repair facility or in the most remote job site. Monaflex systems utilize the combination of flexible rubber heat pads and air bags to provide the desired heat and pressure to vulcanize both rubber filler material in the damaged area of the tire and to the entire repair unit in one simple operation. Tech International maintains a complete inventory of the most popular OTR and truck tire vulcanizing systems as well as replacement parts. (Equipment requires 240 Volts AC unless specified.)

TECH Monaflex OTR System List

Monaflex OTR systems can be customized for specific tire size requirements and later expanded to cover additional tire sizes when needed. This equipment vulcanizes the sidewall, crown, and shoulder areas of OTR tires from 13.00-24 to 55.5/85R63, Tractor and wide base tires from 14.4-24 to 45/65R45.

OTR SYSTEM FOR 14.00-24 TO 29.5-29 RADIAL AND BIAS TIRES MONM100 MONTR1315/20W MONM1721/24W MONM4824W MONM5432W MONM2519H MONM2626H MONM3015H MONM4220H MONTR2621E MONTR2621H MONTROCXL

42

1 1 1 1 1 1 1 1 1 1 1 5

Control Panel Cylinder Air Bag with Window Cylinder Air Bag with Window Flat Air Bag with Window Flat Air Bag w/ window for 29.5 Radials Inside Heat Pad for Bias Tires Inside Heat Pad for Bias Tires Inside Heat Pad for Radial Tires Inside Heat Pad for Radial Tires External Curing Pack External Heat Pad Harness Straps (individual)

Monaflex OTR Vulcanizing System Radial/Bias Ply Application Chart TIRE RANGE: OTR 13.00 TO 55.5/85-63 TRACTOR / OTR & WIDE BASE CONTROL PANEL

M100

TROCXL Straps TROCXL Straps

TROCXL Straps

TROCXL Straps MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

43

TECH Monaflex Systems Individual Components MONAFLEX CONTROL PANEL Monaflex OTR Control panels feature digital temperature controls, digital timers, inside and outside amp meters, air regulators and safety shut offs with an audible error alert.

MONM100 MONMX202

Cat. No. MONM100 MONMX203 MONMX202

Description CONTROL PANEL, CAL9500 digital controls, 3 independent air lines, audible alarm CONTROL PANEL, CAL3300 digital controls, inside/outside air lines, alarm CONTROL PANEL, CAL 3300 digital controls, for small OTR and truck tire sizes

MONAFLEX HEAT PAD Manufactured from a very durable and flexible rubber compound for long life. Pads are specifically designed for radial, bias, inside and outside tire applications. Refer to the OTR system application chart to determine proper system set up for the tire size and construction.

MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

Cat. No. MONM2519H MONTR2621H MONM2626H MONM3132H MONM3015H MONM4220H MONM4224H MONM4824H *MONM5224

Description HEAT PAD, Bias, 25” x 19” heated surface area HEAT PAD, Outside, 26” x 21” heated surface area HEAT PAD, Bias or outside, 26” x 26” heated surface area HEAT PAD, Bias, 31” x 32” heated surface area HEAT PAD, Radial, 30” x 15” heated surface area HEAT PAD, Radial, 42” x 20” heated surface area HEAT PAD, Radial, 42” x 24” heated surface area HEAT PAD, Radial, 48” x 24” heated surface area HEAT PAD, Radial, 52” x 24” heated surface area

MONAFLEX CYLINDER AIR WINDOW BAG Monaflex cylinder air bags inflate to fill out the inner cavity of the tire, providing even pressure without distortion. Cylinder Window bags are produced with a special blue elastic material that allows the bag to expand into the sidewall area of low profile and wide base tires. The bags covers are made of heat resistant nylon for strength and durability.

Cat. No. MONTR1315/20W MONM1721/24W MONM2732/32W MONM3842/32W *MONM5054/32W MONMVS5001/202

Description CYLINDER AIR BAG, 13” - 15” diameter, 20” barrel length CYLINDER AIR BAG, 17” - 21” diameter, 24” barrel length CYLINDER AIR BAG, 27” - 32” diameter, 32” barrel length CYLINDER AIR BAG, 38” - 42” diameter, 32” barrel length CYLINDER AIR BAG, 50” - 54” diameter, 32” barrel length AIR BAG HOSE, male, 16”, 400mm

MONAFLEX FLAT AIR WINDOW BAG Monaflex flat air bags are placed inside the tire with a cylinder air bag for certain tire sizes. This minimizes the number of cylinder air bags required to cover the full range of OTR tires. MONM5432W

MONM4824W

Cat. No. MONM4824W MONM5432W MONM6732W *MONM7532W

Description FLAT AIR WINDOW BAG, 48” x 24” FLAT AIR WINDOW BAG, 54” x 32” FLAT AIR WINDOW BAG, 67” x 32” FLAT AIR WINDOW BAG, 75” x 32”

MONAFLEX EXTERNAL CURING PACK & HARNESS STRAPS Monaflex external curing packs are produced with durable heat resistant nylon covers. The outer cover sleeve slots hold the harness straps in position and simplify equipment set up. The external curing pack provides even pressure on the outside of the tire for excellent filler rubber adhesion. Straps sold separately.

Cat. No. MONTR2621E MONM4832E MONTROCXL MONM45/6/71HG

External Curing Pack Description 26” x 21”, 5 strap cover sleeve 48” x 32”, 6 strap cover sleeve Strap & buckle (5 required), used with TR2621E Harness strap set with guide, used with M4832E

*DENOTES SPECIAL ORDER ITEM

44

TECH Monaflex Complete OTR Vulcanizing Systems

A number of Monaflex Off-The-Road Vulcanizing Systems are available for radial and bias OTR tire ranges from 13.00–24 through 55/80 R 63, including standard, wide base and super wide base tires. The systems are assembled according to the tire size being repaired/cured. Monaflex systems may be used with chemical, cloth-backed or uncured Tech repair units.

MONOTRS SIDEWALL SYSTEM The Monaflex OTRS sidewall system is ideal for bias and radial spot repairs and section repairs in OTR, AG, Skidder and Flotation tire sizes from 14.00-24 to 29.5-29. This system system can be completely set up on the tire in less than 3 minutes. Includes the MONMX202 control panel. OTRS REPLACEMENT PARTS Cat. No. MONOSH2215 MONOSH2815 MONOS2117 MONOS2517

Description OUTSIDE HEAT PAD INSIDE HEAT PAD OUTSIDE AIR BAG INSIDE AIR BAG

MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

*MONXLOTRS SIDEWALL SYSTEM The Monaflex XLOTRS sidewall system vulcanizes spot repairs and radial section repairs in OTR tire sizes from 40.00R57 to55.5/85R63. Steel framework allows for fast, easy set up on sidewall repairs. *SPECIAL ORDER ITEM

*MONXLBRS BEAD REPAIR SYSTEM The Monaflex XLBRS system vulcanizes bead repairs on 40.00R57 to 55.5/85R63 OTR tires. *SPECIAL ORDER ITEM

45

TECH Monaflex Systems for Truck Tires MONTRDD & TRRS SYSTEMS The TRDD and TRRS systems vulcanize repairs in radial and bias truck tire range 8.25 to 12.00-24, including low profile and super single, and 9.5-32 to 12.4-38 tractor. The less expensive TRRS covers the same radial repair sizes but is limited to 7" x 7" bias repairs. The TRDD can be extended up to 23.5 OTR tires.

MONTRM SYSTEM TRM Machine vulcanizes radial and bias tire repairs ranging from 8.25 to 12.00, 365/80 to 445/50 super singles, 13.00 to 17.5 OTR, and 9.5-32 to 16.9-28 tractor tires. This system utilizes a steel housing and fixed outside air bag for quick and easy set up. TRM REPLACEMENT PARTS

MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

Cat. No. MONTR911/13W *MONTRM4815 MONTR1315/15W MONTR2210H MONTR2213H MONM2519H

Description CYLINDER AIR BAG OUTSIDE AIR BAG CYLINDER AIR BAG for Super Singles HEAT PAD HEAT PAD HEAT PAD

*SPECIAL ORDER ITEM

*MONSRS SIDEWALL SYSTEM The SRS truck sidewall system vulcanizes sidewall injuries with repair units up to 6" (150mm) x 13"(330mm). Tire range is 8.25 to 445/50 super singles. Simple design requires 30 seconds to set up and operate. *SPECIAL ORDER ITEM

*MONBRS SIDEWALL SYSTEM The BRS truck tire bead repair system produces quick and easy bead repairs in truck tires ranging from 8.25 to 495/50 super singles. The BRS single piece design sets up and operates in less than 30 seconds. *SPECIAL ORDER ITEM

*MONPTM SYSTEM The PTM system vulcanizes radial and bias tire repairs in passenger, light truck and industrial tires. The steel framework and fixed outside air bag enable quick and easy operation while producing distortion free repairs. Vulcanizes the repair unit and fill rubber in one operation. Passenger Tires: 135/70 to 245/50 Light Truck Tires: 6.50-16 to 245/70-17.5 Industrial Tires: 6.00-9 to 7.00-12 *SPECIAL ORDER ITEM

46

TECH Vulcanizing Equipment

The Lincoln line of products has been used by tire professionals for more than 30 years. These machines offer versatility to achieve any repair of most tires, big and small, on the market.

LINCOLN SPOTTERS Cat. No. *LINT003 *LINT148 *LINT005 S1016 S1016-220 *LINT009 *LINT011 *LINT018 *LINT016

*LINT029

TRUCK TIRE BEAD SPOTTER model 3100 MEDIUM TRUCK TIRE SPOTTER, model MT

Shipping Weight 27 lbs. / 12kg

Optional Parts N/A

54 lbs. / 25kg

N/A

12 lbs. / 5kg

Plate Package LINT149 Plate Package LINT150 Plate Package LINT150 Plate Package LINT151 Plate Package LINT152 Plate Package LINT154 Plate Package LINT153, LINT031 Stand N/A

14 lbs. / 6kg

22 lbs. / 10kg 30 lbs. / 14kg 36 lbs. / 16kg 44 lbs. / 20kg

38 lbs. / 17kg 52 lbs. / 23kg

*LINT026-120 AIR OPERATED TRUCK SPOTTER, model 2000, 120 volt

74 lbs. / 30kg

*LINT026-240 AIR OPERATED TRUCK SPOTTER, model 2000, 240 volt

74 lbs. / 30kg

LINT005

MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS

*LINT022

Description TUBE PLATE SPOTTER model 200 ENVELOPE REPAIR SPOTTER model ERV PASSENGER TIRE SPOTTER model 300 TRUCK TIRE SPOTTER model 400 TUBE PLATE SPOTTER model 400, 220 volt TRACTOR TIRE SPOTTER model 500 LARGE TRUCK/TRACTOR SPOTTER, model 1000 TRACTOR/TRUCK AIR SPOTTER, model 1400 PASSENGER/LIGHT TRUCK SPOTTER, model LT

Plate Package LINT155, LINT031 Stand Plate Package LINT156, LINT033 Stand Plate Package LINT156, LINT033 Stand

*DENOTES SPECIAL ORDER ITEM

S1016

47

TECH Mounting & Demounting Chemicals

Tech mounting and demounting lubricants provide excellent lubricity to make tire mounting and demounting easier when applied to the tire bead and rim mating surfaces. Tech lubricants are petroleum free with rust inhibitors to prevent rust or corrosion. These products are silicone free so they dry tacky preventing tire and rim slippage. Tech Rim Ease is a ready-to-use liquid, while Tech Mount-O-Matic is a concentrated liquid rubber lubricant. Tech Mounting Compound is a vegetable oil based lubricant which can be applied with a brush or mixed with water and applied with a swab. Tech Tire Mounting paste is a water based lubricant with rust inhibitors that goes on with a brush eliminating spills and slip hazards in the service area.

TECH MOUNTING & DEMOUNTING LUBRICANTS AND APPLICATORS Cat. No. 720 720-5G 720-55G 721 722 723 783 783-5E 963 964 971

722

720-5G

TIRE & WHEEL SERVICE LUBRICANTS

721

963

720

971

964

Description RIM EASE MOUNTING LUBRICANT, 1 gal., 3.8 liter jug RIM EASE MOUNTING LUBRICANT, 5 gal., 19 liter pail RIM EASE MOUNTING LUBRICANT, 55 gal., 209 liter drum MOUNT-O-MATIC CONCENTRATE, 16 oz., 475ml TECH TIRE & TUBE MOUNTING COMPOUND, 8 lb., 3.63kg TECH TIRE & TUBE MOUNTING COMPOUND, 25 lb., 11.34kg TECH TIRE MOUNTING PASTE, 8 lb., 3.7kg TECH TIRE MOUNTING PASTE, 11 lb., 5kg PLASTIC FUNNEL, each SWAB, each ANGLED BRUSH, each

723 783

Murphy's Black Lube and Five Star Lube Rim Rust Retardant and Tire Lubricant is applied to all interior rim surfaces and to the tire beads to prevent corrosion and simplify tire mounting and demounting.

NIA2539-8

MOUNTING COMPOUNDS & PASTES Cat. No. 723M 725M NIA2539-8 NIA2539-25 NIA2539-25

725M

Description MURPHY’S TIRE AND TUBE MOUNTING COMPOUND 25 lb., 11.34kg MURPHY’S BLACK LUBE, 35 lb., 15.9kg FIVE STAR LUBE, 8 lb., 3.7kg FIVE STAR LUBE, 25 lb., 11.34kg

723M

Tech Bead Breaker is a penetrating rubber lubricant that frees stubborn beads from the rim and simplifies tire demounting. TECH BEAD BREAKER Cat. No. 734Q 734 734-5G 734-55G

734Q

734

CAUTION: Use in a well ventilated area away from sources of ignition.

48

Description BEAD BREAKER, 1 qt., 945ml can BEAD BREAKER, 1 gal., 3.8 liter can BEAD BREAKER, 5 gal., 19 liter BEAD BREAKER, 55 gal., 209 liter

TECH Tire & Wheel Service Lubricants

Tech service lubricants protect your investment by keeping the inner working parts of air tools and hydraulic equipment free and prolong normal wear. Tech Precision Air Tool Oil is premium grade light weight oil used daily to keep air tools working to their full potential. PB Blaster Air Tool Conditioner removes deposits and helps quickly restore power to air tools. PB Blaster Penetrating Catalyst is an all purpose penetrating lubricant that breaks down rust and corrosion on frozen metal fasteners and metal joints. Markal EZ Break anti-seize prevents threads and metal moving parts from sticking in the most corrosive environments. Five Star Super Blue Jack oil is a premium anti-wear hydraulic jack oil designed for long, trouble free operation in hydraulic jacks, car hoists, dump trucks and shock absorbers.

TECH TIRE & WHEEL SERVICE LUBRICANTS Cat. No. 753 PB-B PB-ATC 418-08907 418-08910 NIA0422

PB-ATC

753

NIA0422

Description TECH PRECISION AIR TOOL OIL , 32 oz, 945ml PB BLASTER PENETRATING CATALYST, 12 oz., 339g aerosol can PB BLASTER AIR TOOL CONDITIONER, CASE OF 12 12 oz, 339g aerosol cans MARKAL EZ BREAK ANTI-SEIZE COPPER GRADE 16 oz. 470ml, with brush cap MARKAL EZ BREAK ANTI-SEIZE, 10 oz. 294ml, with brush cap FIVE STAR SUPER BLUE JACK OIL, 32 oz. 945ml

PB-B

418-08910

418-08907

TIRE & WHEEL SERVICE LUBRICANTS

TECH Chemicals

TECH CHEMICALS Cat. No. 739 705C

705C

Description BUTYL RUBBER REPAIR SEALER, 16 oz, 470ml can with applicator CITRUS BASED RUBBER CLEANER, environmentally friendly rubber cleaner removes contaminants before buffing the inner liner. 32 oz, 945ml can

739

49

TECH Radio Frequency Identification Data Tags

Tech RFID Tags are perfect for commercial fleet tires, vehicle manufacturer tires, government fleet tires, aircraft and OTR tires. Compatible with most RFID scanners and tire management software systems, Tech RFID Tags enable traceability from “cradle to grave” and also help to eliminate labels and hand written reports. Tech RFID Tags install easily inside or outside of the tire. The cured after market style unit can be installed in hot or cold applications. TECH RFID TAGS

RFAMT

Cat. No. RFAMT RFP RFU

Description CHEMICAL CURE RFID TAG for aftermarket PRE-CAST RFID TAG for tire manufacturers UNCURED RFID TAG for tire manufacturers

RFP

RFU

TECH Tools & Chemicals

For best results, use these products to install RFID units:

TECH TOOLS & CHEMICALS Cat. No. 760 704 738 933 938 CP873K RH107 S892

704 738

TIRE IDENTIFICATION

760

CP873K

Description CHEMICAL VULCANIZING FLUID Fast Dry Cement RUB-O-MATIC Rubber Cleaner SECURITY COAT Butyl Repair Sealer RUBBER SCRAPER used with Rub-O-Matic STITCHER, 1 1/2”, 38mm x 1/32”, 0.8mm LOW RPM AIR BUFFER for inner liner preparation BUFFING WHEEL produces perfect texture for best repair adhesion TEXTURE BRUSH

S892 938

933

RH107

TECH Tire Identification Logos

Tech Identification Logos provide a fast, simple way to identify sidewall bulge associated with radial truck repairs.

TIRE IDENTIFICATION LOGOS

BCL

Cat. No. 830 BCL GSL IDOR220

GSL

830

IDOR220

50

Description BLUE IDENTIFICATION TRIANGLE, 1½”, 40mm BLUE IDENTIFICATION CIRCLE (uncured), 1½”, 40mm GREEN IDENTIFICATION SQUARE (uncured), 1½”, 40mm ORANGE IDENTIFICATION TRIANGLE, 1½”, 40mm

Box Qty. 200 200 200 200

MANUAL TIRE SPREADERS

TECH Tire Spreaders

KEN31551

Cat. No. GTS-01 KEN31551

KEN31554

KEN31554

Description TRUCK TIRE SPREADER spread capacity 2”-15” (5cm-38cm) MANUAL SPREADER WITH LOCK PIN spread capacity 4”-6” (10cm-15cm) RATCHETING TIRE SPREADER spread capacity 4”-6” (10cm-15cm)

GTS-01

TECH PASSENGER TIRE SPREADERS Cat. No. PS-1

982 TMRWL98063

982

Description Manual-operated PASSENGER/LIGHT TRUCK SPREADER WITH LIGHT. Can be adjusted to fit a whole range of passenger and light truck tires. TIRE SPREADER REPLACEMENT LIGHT ASSEMBLY

PS-1

*AIR POWERED TIRE SPREADER WITH TIRE LIFT Cat. No. BRALREF For Passenger & Truck Tires from 13" thru 24.5" rim diameter. Spreads passenger, truck and bus tires for inspection or repair. Foot control valve conveniently located at base of machine. Adjustable light. Shipping weight 245 lbs., 111.13kg TIRE SPREADERS

Optional Tire Spreader Without Tire Lift: Order Model LR Shipping weight 210 lbs. BRALREF

*SPECIAL ORDER ITEM

*AIR POWERED TIRE SPREADER Cat. No. BRA5120 For Passenger & Truck Tires from 13" thru 24.5" rim diameter. Spreads passenger, truck and bus tires for inspection or repair. Foot control valve conveniently located at base of machine. Adjustable light. Convenient tool tray can be mounted on either side of the tire spreader. Spread hooks adjust with spring-loaded pins. Shipping weight 150 lbs., 68.04kg *SPECIAL ORDER ITEM

BRA5120

*TIRE REPAIR STATION FOR PASSENGER & TRUCK TIRES Cat. No. BRA5500 If you’re looking for a stable, reliable tire repair station, the 5500 has all the features you’re looking for at an affordable price. Tool tray pivots to either side on machine. Tire spread control conveniently located on both sides of platform top. Foot controls for raising/ lowering platform are located on both sides of the machine. Tire ramp retracts automatically when platform is raised. 5 1/4” air cylinder lift platform using as little as 75 psi. Shipping weight 375 lbs. ,170.01kg *SPECIAL ORDER ITEM

BRA5500

51

TECH Lead Free Balance Pads

Tech lead free balance pads provide a "green" option of balancing the tire from the inside. In special tire service applications such as aircraft tires or large off road 4 X 4 tires, traditional exterior clip on wheel weights may not be enough to correct an out of balance condition or may become dislodged. Installation is performed using the combination of a spin balancer and the same procedures as installing a tire repair unit. TECH BALANCE PADS – OUNCE

1167

1157

1159

Cat. No. 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1167

Description BALANCE PAD, .25 ounce BALANCE PAD, .5 ounce BALANCE PAD, .75 ounce BALANCE PAD, 1 ounce BALANCE PAD, 1.5 ounce BALANCE PAD, 2 ounce BALANCE PAD, 2.5 ounce BALANCE PAD, 3 ounce BALANCE PAD, 3.5 ounce BALANCE PAD, 4 ounce BALANCE PAD, 4.5 ounce BALANCE PAD, 5 ounce BALANCE PAD, 5.5 ounce BALANCE PAD, 6 ounce BALANCE PAD, 8 ounce

Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

TIRE BALANCING & SEALING PRODUCTS

TECH BALANCE PADS – GRAM Cat. No. 1181 1182 1183 1184 1185 1186 1187 1188

1188

Description BALANCE PAD, 30 gram BALANCE PAD, 50 gram BALANCE PAD, 75 gram BALANCE PAD, 100 gram BALANCE PAD, 125 gram BALANCE PAD, 150 gram BALANCE PAD, 175 gram BALANCE PAD, 200 gram

Qty. 1 1 1 1 1 1 1 1

1185 1182

TECH Tools & Chemicals

For best results, use with these products: TECH TOOLS & CHEMICALS

704

738 760

CP873K

S892 938 RH107

52

933

Cat. No. 760 704 738 933 938 CP873K RH107 S892

Description CHEMICAL VULCANIZING FLUID Fast Dry Cement RUB-O-MATIC Rubber Cleaner SECURITY COAT Butyl Repair Sealer RUBBER SCRAPER used with Rub-O-Matic STITCHER, 1 1/2”, 38mm x 1/32”, 0.8mm LOW RPM AIR BUFFER for inner liner preparation BUFFING WHEEL produces perfect texture for best repair adhesion TEXTURE BRUSH

TECH PLUS Tire Balancing Compound Tech is pleased to offer another “green” option to lead weights for improved driver comfort and extended tread life in all LT, Off Road 4x4 and Commercial Truck tire applications. Tech Balancing compound was introduced in 1995 and is still the most durable and free flowing dry tire balancing additive, and is now TPMS compatible. Tech Plus microbeads are specially formulated to prevent static discharge which could potentially damage TPM sensors. Each Tech Plus bag includes a metal selfsealing valve cap. An application chart is available. Ask your Tech representative or go to www.techtirerepairs.com. Click on “TRAINING”, then click on “Repair Manuals and Charts.”

How Tech Plus Works Thousands of specially coated microbeads reduce friction and maintain durability, giving you the option of reinstalling TECH PLUS in a retreaded truck tire for trailer applications.

TECH PLUS microbeads are spread evenly around interior of the tire through centrifugal force.

A tire with a heavy spot on the tread pulls the tire outwards, causing a force that results in vibration.

TECH PLUS microbeads are redistributed around the tire, creating compensating force and reducing vibration.

TECH PLUS TIRE BALANCING COMPOUND

TECH Tire Sealant

Description TECH PLUS, 2 oz. TECH PLUS, 3 oz. TECH PLUS, 4.5 oz. TECH PLUS, 6.5 oz. TECH PLUS, 8.5 oz. TECH PLUS, 10.5 oz. TECH PLUS, 13 oz. TECH PLUS, 16 oz. TECH PLUS, 21 oz. TECH PLUS, 23.5 oz.

Box Qty. 48 36 36 24 24 20 12 12 8 8

TIRE BALANCING & SEALING PRODUCTS

Cat. No. TLP60 TL100 TL150 TL200 TL250 TM300 TM400 TM500 TP6000 TP7000

Tech Tire Sealant effectively seals injuries caused by puncturing objects up to 3/16”, 5mm in all off-road applications. Works in tube type and tubeless tires. Remains effective for the life of the tire. Tech Tire Sealants are biodegradable and water soluble. Maintenance expenses caused by equipment downtime due to flats or hard-to-find leaks are reduced.

TECH TIRE SEALANT Cat. No. 707HD-5G 708HD 709HD 711

Description TECH PREMIUM TIRE SEALANT, 5 gal., 19L container, ea./case TECH PREMIUM TIRE SEALANT, 32 oz., 950ml bottle, 12/case TECH PREMIUM TIRE SEALANT, 16 oz., 470ml bottle, 12/case HAND PUMP for 2½ gal., 9.5L and 5 gal., 19L containers

Application chart available. Ask your Tech representative or go to www.techtirerepairs.com. Click on “TRAINING”, then click on “Repair Manuals and Charts.” NOTE: 708HD and 709HD are sold in case lots of 12 bottles only.

53

TECH TPMS Solutions Universal Sensors

Tech is pleased to offer two brands of universal Tire Pressure Monitoring System replacement sensors. Both types of sensors are produced by automotive O.E. suppliers. These Universal sensors provide over 90% vehicle coverage of the current North American automotive aftermarket, eliminating the need and cost of carrying hundreds of sensor SKU's.

Dill REDI-Sensors are preprogrammed with multiple vehicle protocols and can be used with any electronic TPMS scan tool. Three REDI-Sensors provide 90% aftermarket coverage. These sensors are ready to install with no programming required.

REDI-Sensors

DILL REDI-SENSORS

TPMS7001HP

TPMS7001HPR

Cat. No. TPMS7001HP TPMS7001HPR TPMS7002 TPMS7004 TPMS7020K TPMS1204A TPMS1206A

Description REDI-SENSOR, 315 Mhz with adjustable clamp-in stem and hardware REDI-SENSOR, 315 MHZ clamp adaptor with rubber snap-in valve REDI-SENSOR for Honda, Hyundai, Kia, Lexus, Toyota and others REDI-SENSOR, 433 Mhz with adjustable clamp-in stem and hardware REDI-SENSOR service pack VDO AFTERMARKET SENSOR for Lexus and Toyota, with adjustable clamp-in stem and hardware VDO AFTERMARKET SENSOR for Hyundai, Kia and Toyota, with adjustable clamp-in stem and hardware

Qty. 1 1 1 1 1 1 1

TPMS7004 TPMS7020K

TPMS7002

DILL REDI-SENSOR REPLACEMENT STEMS

TPMS SOLUTIONS

Cat. No. TPMSVS70 TPMSVS70B TPMSVS80

TPMSVS70

TPMSVS70B

Description ALUMINUM STEM FOR DILL REDI-SENSOR BLACK ALUMINUM STEM FOR DILL REDI-SENSOR RUBBER STEM FOR DILL REDI-SENSOR

Qty. 1 1 1

TPMSVS80

Schrader EZ-sensor programmable TPM sensors provide over 90% aftermarket coverage with only two SKU's. At the time of installation, the EZ-sensor is programmed with the exact O.E. vehicle protocol and sensor I.D. using a Bartec TPMS scan tool (EZ-sensor programming software sold separately).

SCHRADER EZ-SENSORS Cat. No. TPMS33000

TPMS34000

TPMS33200 TPMS34000 TPMS20014

TPMS33000

TPMS20014

TPMS33200

54

Description EZ-SENSOR, 315 Mhz with rubber snap-in stem EZ-SENSOR, 433 Mhz with rubber snap-in stem ALUMINUM CLAMP-IN STYLE STEM for EZ-sensor SERVICE PACK FOR ALUMINUM CLAMP-IN STEM

Qty. 1 1 10 25

TECH TPMS Solutions Scan & Programming Tools Bartec TPMS scan tools provide multiple quick, user friendly options to scan, diagnose, and report TPMS problems. Bartec Tools have EZ-sensor programming capabilities. BARTEC 400SD SCAN TOOL TECH400SD provides sensor PSI, temperature and battery life information, make, model, year look up, relearn procedures on the tool, OBD compatible, large backlit LCD screen, rugged design, long battery life, removable SD card or USB cable for software updates, test key fob or other RF signals.

Cat. No. WRT400SD

*BARWRT400SUL1 *BARWRT400SUL2 *BARWRT400SUL3

Description TPMS SCAN TOOL with USB, OBD cables, plastic case, magnet, power supply & 1 year software updates 1 YEAR SOFTWARE UPDATE FOR 400 SERIES 2 YEAR SOFTWARE UPDATE FOR 400 SERIES 3 YEAR SOFTWARE UPDATE FOR 400 SERIES

Qty. 1

1 1 1

* Denotes special order item.

BARTEC 300 SCAN TOOL SOFTWARE SUPPORT Cat. No. *WRT300PSDSUL1 *WRT300PSDSUL2

Qty. 1 1 TPMS SOLUTIONS

*WRT300PSDSUL3

Description 1 YEAR SOFTWARE UPDATE FOR 300 SERIES (with OBD connect) 2 YEAR SOFTWARE UPDATE FOR 300 SERIES (with OBD connect) 3 YEAR SOFTWARE UPDATE FOR 300 SERIES (with OBD connect)

1

* Denotes special order item.

BARTEC TOYOTA LOOP RESET TOOL WRTRST50

Cat. No. WRTRST50

Description BARTEC TOYOTA LOOP RESET TOOL, resets TPMS warning light stuck in “ON” position.

Qty. 1

55

TECH TPMS Solutions Programming & Service Tools BARTEC PROGRAMMING ACCESSORY PAD Bartec TPMS PAD TPMS sensor Programming Accessory Pad connects to any PC to program the EZ-sensor. Internet connection is not required, easy to install software, USB connection. Also reads and copies mechanically damaged O.E. sensor IDs. Cat. No. WRTPAD1

Description TPMS PAD KIT includes programming pad, USB cable and software *BARWRTPAD2 TPMS PAD STARTER KIT includes above items plus four 33000 and two 33100 EZ-sensors *BARWRTPADSUL1 1 YEAR SOFTWARE UPDATE FOR TPMS PAD (for customers with multiple Bartec registered TPMS tools) *BARWRTPADSUL2 1 YEAR SOFTWARE UPDATE (for Bartec registered accessory PAD ONLY)

Qty. 1 1 1

1

* Denotes special order item.

DILL MASTER SERVICE KIT Dill 8100 TPMS Master Service Kit includes all the recommended tools required to perform professional TPMS service.

TPMS8100

Cat. No. TPMS8100

TPMS9700

Description DILL 8100 MASTER TOOL KIT includes: plastic carry case, ¼”dr. torque wrench, 11mm, 12mm sockets, grommet tool, valve core torque tool, T-10 and T-20 Torque screwdrivers, BERU valve holding tool, 3-way fishing tool, 4-way valve nut removal wrench. DILL TPMS POINT OF SALE DISPLAY

Qty. 1

1

TPMS9700

TPMS SERVICE TOOLS TPMS SOLUTIONS

Cat. No. TPMS5415 VH609

TPMS5535 TPMS55351

TPMS5415

VH609 VH606

Description T-10 TORQUE SCREWDRIVER with Torx bit T-20 TORQUE SCREWDRIVER with Torx bit REPLACEMENT TORX BITS for T-20 Torque Screwdriver VALVE CORE TORQUE TOOL VALVE FISHING TOOL

Qty. 1 1 5 1 1

TPMS5535 VH606

KEN-TOOL RECORE TPMS SENSOR SAVER SYSTEM Cat. No. KEN29980 KEN29981 KEN29982 KEN29983 KEN29984 KEN29985 KEN30060

KEN29980

KEN29981

KEN29985 KEN29983

56

KEN30060

KEN29984

KEN29982

Description RECORE TPMS SENSOR SAVER KIT RECORE TPMS 25 PIECE REFILL KIT RECORE CUTTING TOOL TAP HOLDER WITH T-HANDLE RECORE TAP KEN-LOK THREADLOCKER TPMS VALVE TORQUE TOOL

Qty. 1 1 1 1 1 1 1

TECH TPMS Solutions Service Packs

Tech recommends following TPMS service best practices as recommended by sensor manufacturers. Replace grommets, washers, valve cores and clamping nuts during tire replacement or whenever the sensor is removed from the wheel.

TPMS ACCESSORY KIT 7100 TPMS ACCESSORY KIT includes a full assortment of O.E. sensor service parts: valve caps and nickel plated cores, grommets, color coded application chart and packs for quick simplified selection. Cat. No. TPMS7100

Description Qty. 7100 TPMS ACCESSORY KIT includes: 1 4-TPMS1030K, 6-TPMS1050K, 6-TPMS1060K, 6-TPMS1070K, 6-TPMS1080K, 4-TPMS1090K, 6-TPMS1100K, 6-TPMS1110K, 6-TPMS1130K, 6-TPMS2000K, 4- TPMS2010K,4-TPMS2020K, 4-TPMS2030K, 4-TPMS2040K, 6-DILVS950-rubber stems, 4-TPMS950SC chrome sleeves, 1-valve fishing tool, 1- 4-way nut removal wrench, 20-valve cores, 20-plastic valve caps

REFILL SERVICE PACKS Cat. No. TPMS1030K TPMS1040K TPMS1050K TPMS1060K TPMS1070K TPMS1080K TPMS1090K TPMS1100K

Qty. 1 1 1 1 1 1 1 1

Cat. No. TPMS1110K TPMS1130K TPMS2000K TPMS2010K TPMS2020K TPMS2030K TPMS2040K TPMS7020K REDI-SENSOR

Qty. 1 1 1 1 1 1 1 1

REPLACEMENT TPMS VALVE STEMS

TPMS925A TPMS925B TPMS925C TPMS950S TPMS950SC/4PK TPMS925A

TPMS925B

TPMS925C

TPMS950S

Description RUBBER SNAP-IN STEM with torx head screw ALUMINUM VALVE STEM for GM, Ford, Dodge, Subaru & Suzuki ALUMINUM BLACK ANODIZED for GM, Ford, Dodge, Subaru & Suzuki CHROME VALVE STEM for GM, Ford, Dodge, Subaru & Suzuki SNAP IN VALVE STEM WITH CHROME SLEEVE AND CAP for GM, Subaru & Suzuki SNAP IN CHROME SLEEVE AND CAP 4/PACK for TRI20008

Unit Qty. 1

TPMS SOLUTIONS

Cat. No. TRI20008

1 1 1 1 each

TRI20008

TPMS TRAINING CHART Cat. No. TPMSRC

Description TPMS RELEARN CHART

Qty. 1

ASK YOUR TECH REPRESENTATIVE ABOUT TPMS TRAINING PROGRAMS AND ADDITIONAL REFERENCE MATERIALS.

57

TECH Valve Hardware

Tech International selects manufacturing partners who take quality as seriously as we do. Tire accessories and valve hardware manufactured by Baolong Automotive Corporation are certified according to the Quality Management System for TPMS and Tire Accessories, and have fulfilled the requirements for ISO/TS 16949:2002 certification by TUV SUD Management Services GmbH.

RUBBER SNAP-IN VALVES FOR PASSENGER & LIGHT TRUCK 65 PSI MAX

TRI425

TRI418/500

Cat. No. TRI413/500

TR No. 413

TR413CH/50

413

TRI414/50

414

TRI415/50

415

TR418CH/100 418

TR413CH/50

TRI413/500

TRI418/500

418

TRI423/50

423

TRI425

425

Description SNAP-IN TUBELESS TIRE VALVE for .453 rim hole SNAP-IN TUBELESS TIRE VALVE for .453 rim hole. Chrome sleeve/cap SNAP-IN TUBELESS TIRE VALVE for .453 rim hole SNAP-IN TUBELESS TIRE VALVE for .625 rim hole SNAP-IN TUBELESS TIRE VALVE for .453 rim hole. Chrome sleeve/cap SNAP-IN TUBELESS TIRE VALVE for .453 rim hole SNAP-IN TUBELESS TIRE VALVE for .453 rim hole SNAP-IN TUBELESS TIRE VALVE for .625 rim hole

Effective Length 1¼”, 32mm

Pkg. Qty. 500

1¼”, 32mm

50

1½”, 38mm

50

1¼”, 32mm

50

2”, 51mm

100

2”, 51mm

500

2½”, 63mm

50

2”, 51mm

1

TRI415/50

BAOLONG TIRE VALVE TRACEABLE ID

Valves are fundamental to proper tire upkeep. It is recommended that valves be checked every three months and replaced every year or 20,000 km / 12,500 miles. Each Baolong rubber tire valve is etched with a Traceable ID so you can check the production dates without removing the valve from the rim, and manage your inventory easily on a first-in, first-out basis.

VALVES & VALVE HARDWARE

COMPANY MARK YEAR (0 – 9) MONTH (1 – 9 plus A, B & C) DAY (1 – 9 plus 26 Letters Excluding I, O, Q, Z)

TPMS REPLACEMENT VALVE Cat. No. TRI20008

TRI20008

58

Description RUBBER SNAP-IN STEM with T10 torx head screw

Pkg. Qty. 1

TECH Valve Hardware HIGH PRESSURE SNAP-IN VALVES – 100 PSI MAX Cat. No. VHI600HP

TR No. 600HP

VH602HP

602HP

VHI801HP

801HP

Description HIGH PRESSURE TUBELESS RUBBER VALVE for .453 rim hole HIGH PRESSURE TUBELESS RUBBER VALVE for .453 rim hole HIGH PRESSURE TUBELESS RUBBER VALVE for .625 rim hole

Effective Length 1¼”, 32mm

Pkg. Qty. 1

2”, 51mm

1

1¼”, 33mm

1

VHI600HP

CLAMP-IN VALVES FOR PASSENGER & HIGH PERFORMANCE 150 PSI MAX Cat. No. VHI521MS VHIV411

TR No. 416

VHI638 VHI651-45 VHI657 VHI662-90 VHI407

VHI651-45

VHI407

VHIV411

VHI521MS

Description CLAMP-IN PASSENGER VALVE NICKEL PLATED VALVE with 8.3mm valve hole ENKEI VALVE STRAIGHT ENKEI VALVE 45° ENKEI VALVE STRAIGHT ENKEI VALVE 90° METAL CLAMP-IN CHROME INNER MOUNT VALVE 6mm valve hole

Effective Length 1¼”, 31mm 1¼”, 31mm

Pkg. Qty. 1 1

1½”, 38mm 2”, 50mm 2¼”, 57mm 2½”, 62mm 1½”, 39.5mm

1 1 1 1 1

VHI657

CLAMP-IN VALVES FOR FORD LIGHT TRUCK – 150 PSI MAX Description FORD OE VALVE F-SERIES DUAL WHEEL

Effective Length A = 1”, 25mm B = 1.1”, 28mm

Pkg. Qty. 10

Total Length 1½”, 37mm

Pkg. Qty. 1

1¾”, 42mm

1

1¾”, 42mm

1

1¾”, 42mm

1

VALVES & VALVE HARDWARE

Cat. No. VHIV416-20/BG

HIGH PERFORMANCE TUBELESS TIRE VALVES Cat. No. VHIEV37NI-N

VHIEV42NI VHIEV42NI-N

VHIEV42SNI

VHIEV37NI-N

VHIEV42SNI

VHIEV42NI-N

Description NICKEL PLATED VALVE, with special long nut, 11mm hex and 16mm length. Slotted flat bottom. NICKEL PLATED VALVE, with special long nut, 14mm hex and 16mm length. NICKEL PLATED VALVE, with special long nut, 11mm hex and 16mm length. Improved version with nylon washer to protect rims. NICKEL PLATED VALVE, with special short nut, 14mm hex and 8mm length.

VHIEV42NI

59

TECH Valve Hardware TUBELESS VALVES FOR MOTORCYCLES AND SCOOTERS Cat. No. VHI401

B

TRI412

A TRI412L VHI430A

Description SNAP-IN TUBELESS SCOOTER VALVE w/90° bend. For 8.8 rim hole SNAP-IN VALVE FOR MOTORCYCLES, RALLY VEHICLES & INDUSTRIAL VEHICLES. For .453 rim hole SNAP-IN TUBELESS VALVE w/90° bend CLAMP-IN TUBELESS NICKEL-PLATED METAL VALVE for rim hole .327”-.339”, 8.3mm-8.6mm

Effective Length A = 1¼”, 30mm B = 1¼”, 30mm 7/8”, 25mm

Pkg. Qty. 1

A = 1¼”, 31mm B = 1¼”, 30mm 1¼”, 30mm

1

Effective Length 1¼”, 30mm

Pkg. Qty. 1

1½”, 40mm

10

A = 1”, 26mm B = 1”, 26mm A = 1”, 26mm B = 1”, 26mm 2”, 50mm

1 10

31/8”, 80mm

1

31/8”, 80mm

10

A = 1¼”, 33mm B = 2”, 50mm 33/8”, 85mm

10

1

1

VHI401 TRI412

VHI430A

TRI412L

CLAMP-IN BRASS TRUCK VALVES – 150 PSI MAX

VHI72890

VALVES & VALVE HARDWARE

VHI72690

VHI72590

VHI722MS

60

VHI724MS/BG

VHI725MS

VHI729MS

Cat. No. VHI722MS

TR No. 575

VHI723MS/BG

501

VHI724-23

500

Description TUBELESS BRASS STRAIGHT TRUCK VALVE TUBELESS BRASS STRAIGHT TRUCK VALVE TRUCK VALVE w/23° bend

VHI724-23/BG

500

TRUCK VALVE w/23° bend

VHI724MS/BG

500

TUBELESS BRASS STRAIGHT TRUCK VALVE VHI725MS 570 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI725MS/BG 570 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI72590 570 CLAMP-IN TUBELESS BRASS VALVE w/90° bend VHI726MS/BG 571 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI72690 571C CLAMP-IN TUBELESS BRASS VALVE w/90° bend VHI727MS/BG 572 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI72790 572C CLAMP-IN TUBELESS VALVE w/90° bend VHI728MS/BG 573 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI72890 573C CLAMP-IN TUBELESS BRASS VALVE w/90° bend VHI729MS 574 TUBELESS BRASS STRAIGHT TRUCK VALVE VHI729MS/BG 574 TUBELESS BRASS STRAIGHT TRUCK VALVE

A = 1¼”, 33mm B = 2¼”, 58mm 3¾”, 95mm A = 1¼”, 33mm B = 2½”, 67mm 43/8”, 110mm

10

10 1 10 1 10

A = 1¼”, 33mm B = 3¼”, 83mm 5”, 128mm

1 1

5”, 128mm

10

TECH Valve Hardware SCREW-ON BRASS VALVES Cat. No. VHIV30210 VHIV30210

TR No.

VHIV30212

VH5567B

VH5562B

1075A

VH5566B

1175A

VH5567B

1078A

VH5566B

Description SINGLE BEND UNIVERSAL SCREW-ON VALVE w/94° bend SINGLE BEND UNIVERSAL SCREW-ON VALVE w/94° bend SCREW-ON TRUCK VALVE single bend with bridge washer SCREW-ON TRUCK VALVE single bend with bridge washer SCREW-ON TRUCK VALVE single bend with bridge washer

Effective Pkg. Length Qty. A = ¾”, 20.5mm 1 B = 4½” 115mm A = 3¼”, 20.5mm 1 B = 5¼”, 132mm 3”, 75mm 1 4½”, 115mm

1

5”, 125mm

1

VH5562B

TR540 SERIES NICKEL PLATED TRUCK VALVES – 150 PSI MAX

B

VHI542

VHI544

VHI543D/BG

Description STRAIGHT TRUCK VALVE STRAIGHT TRUCK VALVE TRUCK VALVE w/45° bend

VHI543D/BG 543D

TRUCK VALVE w/60° bend

VHI543E/BG 543E

TRUCK VALVE w/75° bend

VHI544 VHI544/BG VHI734/BG

544 544 544D

STRAIGHT TRUCK VALVE STRAIGHT TRUCK VALVE TRUCK VALVE w/60° bend

VHI544E

544E

TRUCK VALVE w/75° bend

VHI544E/BG 544E

TRUCK VALVE w/75° bend

VHI545 VHI545/BG VHI736/BG

545 545 545D

STRAIGHT TRUCK VALVE STRAIGHT TRUCK VALVE TRUCK VALVE w/60° bend

VHI545E/BG 545E

TRUCK VALVE w/75° bend

VHI546 VHI546/BG VHI546D

546 546 546D

STRAIGHT TRUCK VALVE STRAIGHT TRUCK VALVE TRUCK VALVE w/60° bend

VHI546D/BG 546D

TRUCK VALVE w/60° bend

VHI546E

546E

TRUCK VALVE w/75° bend

VHI546E/BG 546E

TRUCK VALVE w/75° bend

VHI543E/BG

VHI546E/BG

VHI545E/BG

VHI546D/BG

Effective Pkg. Length Qty. 1¼”, 32mm 1 2¼”, 59mm 10 A = 15/16”, 24mm 10 B = 13/8”, 35mm A= 1”, 25 mm 10 B = 13/8”, 35 mm A= 1”, 25 mm 10 B = 13/8”, 35 mm 2¾”, 73mm 1 2¾”, 73mm 10 A= 1”, 25 mm 10 B = 2”, 49 mm A= 1”, 25 mm 1 B = 2”, 49 mm A= 1”, 25 mm 10 B = 2”, 49 mm 3½”, 89mm 1 3½”, 89mm 10 A= 1”, 25 mm 10 B = 2½”, 66 mm A= 1”, 25 mm 10 B = 2½”, 66 mm 4¼”, 108 mm 1 4¼”, 108mm 10 A= 1”, 25 mm 1 B = 2½”, 66 mm A= 1”, 25 mm 10 B = 2½”, 66 mm A= 1”, 25 mm 1 B = 3¼”, 85 mm A= 25 mm 10 B = 3¼”, 85 mm

VALVES & VALVE HARDWARE

A

Cat. TR No. No. VHI542 542 VHI543/BG 543 VHI543C/BG 543C

VHI736/BG VHI546

VHI545

61

TECH Valve Hardware

VH550 SERIES VALVES for Aluminum Truck Wheels (9.7mm valve hole. 150 psi max). Replaces VH540 series valve with a superior grommet seal design for longer sealing life, greater corrosion resistance, higher temperature range and greater tear resistance. Slotted hex base for easier installation. VH550 SERIES VALVE STEMS – 150 PSI MAX Cat. No. *VH552 *VH553 VH553C VH553E VH554D VH555D VH555E *HALG-550

B A VH554D

TR No. 552 553 553C 553E 554D 555D 555E RG70

A Bend 1.26 – 2.4 – .93 45° .98 75° .98 60° .98 60° .98 75° Fits .975 valve hole

B – – 1.43 1.38 1.94 2.6 2.6

Nut HN-22 HN-22 HN-22 HN-22 HN-22 HN-22 HN-22

Pkg. Qty. 1 1 1 1 1 1 1 1

*Replacement grommet Cat. No. HALG-550 VH553C VH552

NICKEL PLATED TRUCK VALVE STEMS – 150 PSI MAX

VHI758

VALVES & VALVE HARDWARE

VHI756/BG

VHI755

62

Cat. No. VHI755

TR No. 511

VHI755/BG

511

VHI756/BG

509

VHI758

510

VHI758/BG

510

Description TUBELESS ALUMINUM DISC VALVE STEM w/90° bend TUBELESS ALUMINUM DISC VALVE STEM w/90° bend TUBELESS ALUMINUM DISC VALVE STEM w/90° bend TUBELESS ALUMINUM DISC VALVE STEM w/90° bend TUBELESS ALUMINUM DISC VALVE STEM w/90° bend

Effective Length 4.25”, 108 mm

Pkg. Qty. 1

4.25”, 108 mm

10

4.75”, 121 mm

10

5.50”, 140 mm

1

5.50”, 140 mm

10

TECH Valve Hardware EUROPEAN STYLE NICKEL PLATED TRUCK VALVES – 150 PSI MAX Cat. No. VHIN321 VHIN3221

VHIN326-27

VHIN324-27

VHIN323 VHIN324-27 VHIN325-27

VHIN3221

VHIN326-27 VHIN321

VHIN327-27

Description V3-20-1 NICKEL TRUCK V3-22-1-NICKEL O-RING SEAL CLAMP-IN w/45° bend V3-20-3 NICKEL TRUCK VALVE V3-20-4 NICKEL TRUCK VALVE w/ 27° bend V3-20-5 NICKEL TRUCK VALVE w/ 27° bend V3-20-6 NICKEL TRUCK VALVE w/ 27° bend V3-20-7 NICKEL TRUCK VALVE w/ 27° bend

Effective Pkg. Length Qty. 1½”, 36mm 1 A = 1”, 25 mm 1 B = 1.1”, 28 mm 3¼”, 82mm 1 A = 1”, 25 mm 1 B = 2½”, 60 mm A = 1”, 25 mm 1 B = 1½”, 40 mm A = 1”, 25 mm 1 B = 3¼”, 85 mm A = 1”, 25 mm 1 B = 2, 50 mm

EUROPEAN STYLE BRASS TRUCK VALVES – 150 PSI MAX VHIE326-27

Cat. No. VHIE321

VHIE324-27 VHIE327-27

VHIE321

Effective Length 1½”, 36mm

Pkg. Qty. 1

A = 1¼”, 30 mm B = 2½”, 60 mm 3¼”, 82mm A = 1”, 25 mm B = 2½”, 60 mm A = 1”, 25 mm B = 1½”, 40 mm A = 1”, 25 mm B = 3¼”, 85 mm A = 1”, 25 mm B = 2”, 50 mm A = 1”, 25 mm B = 1.1”, 28 mm

1 1 1 1 1 VALVES & VALVE HARDWARE

VHIN3221

Description V3-20-1 BRASS TRUCK VALVE w/17.5° bend VHIE32217 O-RING SEAL CLAMP-IN VALVE METRIC VHIE323 V3-20-3 BRASS TRUCK VALVE VHIE324-27 V3-20-4 BRASS TRUCK VALVE w/ 27° bend VHIE325-27 V3-20-5 BRASS TRUCK VALVE w/ 27° bend VHIE326-27 V3-20-6 BRASS TRUCK VALVE w/ 27° bend VHIE327-27 V3-20-7 BRASS TRUCK VALVE w/ 27° bend VHIE58MS9745 V3-22-1 METRIC O-RING SEAL CLAMP-IN VALVE w/45° bend

1 1

EUROPEAN-STYLE CLAMP-IN VALVES FOR TRUCK AND BUS – 150 PSI MAX

A

B

Cat. No. VHIV3121 VHIV3131 VHIV3141

Effective Pkg. Description Length Qty. EURO SINGLE BEND TUBELESS VALVE A = 1½”, 40 mm 1 EURO DOUBLE BEND TUBELESS A = 1¾”, 46.5mm 1 VALVE w/ 153° bend B = 1¾”, 42.5 mm EURO TRIPLE BEND TUBELESS VALVE B = 1”, 26 mm 1

VHIV3131

VHIV3121

63

TECH Valve Hardware VALVE CAPS Cat. No. VHICAPS VHI53/1 VHI53/1S VH60GRY VH656/58 VHIVC8-G

VH60GRY

VHICAPS

VHI53/1

VHI53/1S

VHIVC2

VH82

VHIVC2 VHIVC8-G VH82

Description PLASTIC VALVE DUST CAPS, long version NICKEL PLATED, LONG METAL DOME SEALING CAP SHORT METAL DOME SEALING CAP PLASTIC SEALING CAP GREY ADAPTOR CAP to convert large bore to standard bore with cap NICKEL PLATED METAL SCREWDRIVER SEALING CAP LONG PLASTIC DUST CAP GREEN DOUBLE SEAL VALVE CAP extends valve ½”, 13mm OAL

Pkg. Qty. 100 100 1 100 1 1 1 100

VH656/58

VALVE CORES Cat. No. VHI430HT/1

VHJ440 VH430HT-F

VH430HT-F

VHJ450

VHJ440 VHJ450

Description TRC-1 HEAT RESISTANT VALVE CORE temperature range -40°F to 284°F (-40°C to 140°C) FILTERED VALVE CORE high temp (shown above) TRC-2 LONG LARGE BORE VALVE CORE TRC-2 LARGE BORE VALVE CORE

Pkg. Qty. 100 20 1 1

VALVES & VALVE HARDWARE

VHI430HT/1

GROMMETS Cat. No. VH822

VH823

VH822

VH827

VH824

HALG-170S VHJ829

64

TR Pkg. No. Description Qty. TRG-46 REPLACEMENT GROMMET for VH755, 1 VH756 and VH758 valves VH823 RG-15 REPLACEMENT GROMMET for VH720 series 1 tubeless truck tire valves VH824 RUBBER GROMMET for Michelin replacement 1 valve VH4567 and 6220 VH827 TRG-7 REPLACEMENT GROMMET for VH596, VH580, 1 VH582 and VH584 tire valves *HALG-550 RG-70 HIGHT TEMP REPLACEMENT GROMMET 1 for 550 series valves *HALG-170S HIGH TEMP SILICONE REPLACEMENT GROMMET 1 for VH720 series tubeless truck tire valves. Maximum temp. 400°F, 204°C. VHJ829 RG-22 REPLACEMENT GROMMET for VHJSP2 1 tubeless spud *Denotes special order item

TECH Valve Hardware PASSENGER PLASTIC VALVE EXTENSIONS Cat. No. VH34 VH35 VH36 VH37

VH34

VH35

VH36

Description PLASTIC VALVE EXTENSION PLASTIC VALVE EXTENSION PLASTIC VALVE EXTENSION PLASTIC VALVE EXTENSION

Length ¾”, 20mm 1¼”, 30mm 1½”, 40mm 2”, 50mm

Pkg. Qty. 100 100 100 50

Length 1½”, 33.5mm 3”, 77mm 3¾”, 97.5 mm 4¼”, 107.5mm 5¼”, 132.5mm 6”, 152.5mm 6¼”, 162.5mm

Pkg. Qty. 1 1 1 1 1 1 1

Length 1¼”, 29mm

Pkg. Qty. 1

1½”, 34mm

1

Length ½”, 13mm ¾”, 20 mm 1 ¼”, 30 mm 3”, 75 mm

Pkg. Qty. 1 1 1 1

5”, 125 mm

1

6”, 150 mm

1

VH37

PLASTIC TRUCK VALVE EXTENSIONS VHIBLE153TP VHIBLE98TP

VHIBLE34TP

Cat. No. VHIBLE34TP VHIBLE78TP VHIBLE98TP VHIBLE108TP VHIBLE133TP VHIBLE153TP VHIBLE163TP

Description PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION PLASTIC TRUCK VALVE EXTENSION

BRASS TRUCK VALVE EXTENSIONS

VHIBLE34B90

Description BRASS TRUCK VALVE EXTENSION w/45° bend BRASS TRUCK VALVE EXTENSION w/90° bend

VALVES & VALVE HARDWARE

Cat. No. VHIBLE29B45

VHIBLE34B90

VHIBLE29B45

METAL VALVE & RIGID EXTENSIONS Cat. No. VH601 VH602 VH603 VH643

VH646

VH645

VH645

VH646 VH643

VH603

VH602

Description METAL VALVE EXTENSION METAL VALVE EXTENSION METAL VALVE EXTENSION STRAIGHT METAL TRUCK VALVE EXTENSION STRAIGHT METAL TRUCK VALVE EXTENSION STRAIGHT METAL TRUCK VALVE EXTENSION

VH601

65

TECH Valve Hardware FLEXIBLE RUBBER VALVE EXTENSIONS Cat. No. VHIFVE125 VHIFVE140 VHIFVE160 VHIFVE180 VHIFVE210 VHIFVE250 VHIFVE280

VHIFVE250

Description RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION RUBBER VALVE EXTENSION

Length 4.92”, 125mm 5.5”, 140mm 6.3”, 160mm 7.09”, 180mm 8.25”, 210mm 9.84”, 250mm 11.03”, 280mm

Pkg. Qty. 1 1 1 1 1 1 1

VHIFVE180

VHIFVE140

STAINLESS STEEL BRAIDED FLEXIBLE RUBBER VALVE EXTENSIONS Cat. No. Description VHIFVE160B METAL BRAIDED FLEXIBLE VALVE EXTENSION VHIFVE180B METAL BRAIDED FLEXIBLE VALVE EXTENSION VHIFVE210B METAL BRAIDED FLEXIBLE VALVE EXTENSION VHIFVE250B METAL BRAIDED FLEXIBLE VALVE EXTENSION VHIFVE270B METAL BRAIDED FLEXIBLE VALVE EXTENSION

VHIFVE270B

VALVES & VALVE HARDWARE

VHIFVE210B

Length 6.3”, 160mm

Pkg. Qty. 1

7”, 180mm

1

8.25”, 210mm

1

10”, 250mm

1

10.64”, 270mm

1

VHIFVE180B

VALVE EXTENSION HOLDERS Cat. No. VHIBLH11 VHIBLH21 VHIBLH22

VHIBLH11

VHIBLH21 VHIBLH22

66

Description SINGLE HOLDER FLEXIBLE VALVE EXTENSION DOUBLE HOLDER FLEXIBLE VALVE EXTENSION DOUBLE HOLDER FLEXIBLE VALVE EXTENSION

Pkg. Qty. 1 1 1

TECH Tractor, Grader & Large Bore Valves

Tech offers a complete line of valves for agricultural, grading, material handling and earthmoving applications… anywhere liquid ballast is used. These high quality Tech products are designed to simplify air-liquid service and provide long, dependable life. Large Bore Valves are designed for when faster inflation times or air/liquid inflation are required. Air flow through Large Bore Valves is three time more than standard bore. Mega bore and Z bore valves and hardware available by special order. TRACTOR/GRADER VALVES/CORE HOUSINGS & EXTENSIONS

VH582

VH595 VHI594

VHI596

VH580 VH597 VH584

Cat. No. VH580

TR No. 621A

VH582

622A

VH584

623A

VHI594 VH595 VH597 VHI596

CH-3 CH-1 618A

VH936A

453

VH936B

625

Description LARGE BORE TUBELESS AIR-LIQUID VALVE for .625 valve hole LARGE BORE TUBELESS AIR-LIQUID VALVE for .625 valve hole LARGE BORE AIR-LIQUID VALVE for .625 valve hole AGRI-CORE HOUSING for air-liquid valves AGRI-CORE HOUSING, OLD TYPE AIR-LIQUID VALVE EXTENSION LARGE BORE TUBELESS AIR-LIQUID VALVE for .625 valve hole FRONT TUBELESS TRACTOR VALVE for .453 rim hole (not shown) FRONT TUBELESS TRACTOR VALVE for .625 rim hole (not shown)

Effective Length 4½”, 115 mm with 65° bend 6¼”, 155 mm with 90° bend 3¾”, 95 mm with 65° bend

2¾”, 70 mm 2”, 50mm straight 9/16”, 14mm 9/16”,

14mm

LARGE BORE SWIVEL VALVE STEMS & STRAIGHT VALVE STEMS FOR USE WITH VHJSP2 TUBELESS SPUD & VHJAD4 SWIVEL ADAPTOR

B

Cat. No. VHIJ651

A

TR No.

VHIJ652 VHIV5101

VHIJ652

Description LARGE BORE SWIVEL TYPE VALVE STEM w/ Single 90° bend LARGE BORE SWIVEL TYPE VALVE STEM w/ Single 86° bend TUBELESS SPUD fits 13/16”, 20.5mm rim hole. Use with all large bore swivel valves.

Effective Length A = 1¼”, 32mm B = 4¾”, 119mm A = 11/16”, 27mm B = 5½”, 140mm

VHIV5101

Cat. No. VHJ4450 VHJ4600 VHJ4750 VHJ4900

VHJ4900

TR No. J-4000-4½ J-4000-6 J-4000-7½ J-4000-9

Bend Angle 90° 90° 90° 90°

Horizontal Length in. mm 4½ 115 6 150 7½ 190 9 230

VALVES & VALVE HARDWARE

LARGE BORE SWIVEL VALVE STEMS FOR USE WITH VHJSP2 TUBELESS SPUD & VHJAD4 SWIVEL ADAPTOR Vertical Height in. mm 15/64 27 15/64 27 15/64 27 15/64 27

VHJ4750

VHJ4450

VHJ4600

LARGE BORE TURRET VALVE STEM, TANK VALVE, SWIVEL VALVE ADAPTOR & TUBELESS SPUD

VHB9A

VHJSP2 VHJAD4

Cat. No. VHB9A

TR No. B9A

VHJAD4

TRAD4

VHJSP2

SP-2

VHJ690

J-690

Description Fits TR-218A and TR-220A valves to allow use of valve in the 13/16” valve hole SWIVEL VALVE ADAPTOR converts tubes with SP-1000 type spud to accept large bore swivel valves TUBELESS SPUD TR-SP2 fits 13/16” rim hole, used with all swivel large bore valves TURRET VALVE for planetary gear wheels

VHJ690

67

LARGE BORE FLOW Ø .19” / 4.826mm

Tractor, Grader & Large Bore Valves LARGE BORE EXTENSIONS Cat. No. VHJ7678 VHJ7734 VHJ7900

VHJ7900

Description METAL VALVE EXTENSION, Large Bore METAL VALVE EXTENSION, Large Bore METAL VALVE EXTENSION, Large Bore

Length 67/8”, 175 mm 7¾”, 195 mm 9”, 230 mm

VHJ7734

VHJ7678

HAND BENDABLE EXTENSIONS Cat. No. *HAL753S –XXX

Description LARGE BORE HAND BENDABLE VALVE EXTENSION

Length Available in lengths 3.5” to 32”

HAL753S –XXX

CUSTOM BENT SWIVEL VALVES FOR CATERPILLAR (OE VALVES) VALVES & VALVE HARDWARE

Cat. No. *HALWHG-8018VC *HALWHG-8019VC

Description SWIVEL VALVE with 4 bends SWIVEL VALVE with 1 bend

Length 26¾” 8”

*DENOTES SPECIAL ORDER ITEM HALWHG-8018VC

HALWHG-8019VC

LARGE BORE VALVE CAPS AND ADAPTORS

VHJ67

VHJ59

68

VH65558

VH65658

Cat. No. VHJ59 VHJ67 VH65558

TR No. VC-6 VC-7 AD1

VH65658



Description VALVE CAP, large bore, screwdriver top HEX TOP for easy tightening and removal LARGE BORE HEXAGON ADAPTOR with cap (inside) converts large bore to standard bore LARGE BORE ROUND ADAPTOR with cap (outside) converts large bore to standard bore

Pkg. Qty. 1 1 1 1

Super Large Bore Valves are recommended for earthmover applications from 20” up to 57” when faster inflation/deflation times are required. Air flow through Super Large Bore Valves is four times faster than large bore valves. There are four key components to the SLB Valve and a unique inflator to maximize air flow.

Super Large Bore Valves & Accessories

SUPER LARGE BORE FLOW Ø .44” / 11.176mm

SLB SWIVEL VALVE AND COMPONENTS COMPLETE SUPER LARGE BORE VALVES HALM-1950-8

Cat. No. Description *HALM-1950-8 COMPLETE SWIVEL VALVE ASSEMBLY including R-520 and T81 *HALM-1900-8 Same as M-1950-8 but without T-81 spud

Pkg. Qty. 1

CLAMP-IN SPUDS Cat. No. *HALT-81 *HALT-82

HALB-222 HALA-126

HALT-81

Description TR No. SP8, 13/16” valve hole Same as T-81 with ¼” additional length

Pkg. Qty. 1 1

SWIVEL ANGLE CONNECTOR HALR-660 HALR-525

Cat. No. *HALR-525 *HALR-660

Description 90° angle, screws on to spud* 60° angle (not shown)

Pkg. Qty. 1 1

FLEXIBLE EXTENSION Cat. No. *HALMT-3000

HALR-520

Description FLEXIBLE EXTENSION WITH BRASS FITTINGS, 2 B-222 nuts, specify length when ordering. (MT3035 is 35” long) not shown

Pkg. Qty. 1

CORE HOUSING HALT-82

HALT-81

Description TR No. CH-8, includes cap and core

Pkg. Qty. 1

VALVES & VALVE HARDWARE

Cat. No. *HALR-520

SUPER LARGE BORE INFLATOR ADAPTOR Reduces inflation time by 60%, deflation time by 80%. Accepts ½” NPT for easy air hose connection, extracts valve core. Standard valve stem knob allows air pressure checks during inflation with a tire pressure gauge. Cat. No. *HALIN-80A

Description SLB INFLATOR ADAPTOR

Pkg. Qty. 1

HALIN-80A

*DENOTES SPECIAL ORDER ITEM

69

Super Large Bore Valves & Accessories SLB VALVE ASSEMBLY TOOLS Cat. No. *HALT-620 *HALSLBHAT

Description SLB FIELD ASSEMBLY TOOL SLB HYDRAULIC ASSEMBLY TOOL (pump not included)

Pkg. Qty. 1 1

HALT-620

HALSLBHAT

SUPER LARGE BORE FIELD ASSEMBLY KITS HALR-763

Kits include brass fittings needed to assemble one flexible SLB valve using the T-620 or SLBHAT with a hydraulic pump. Cat. No. *HALR-969K-1 *HALR-969-K *HALR-760-50 *HALR-760-100

HALR-7625 HALB-222

Pkg. Qty. 1 1 1 1

VALVES & VALVE HARDWARE

HALR-764R

Description Includes 1 ea. R762S, R-763, 2 ea. R-764 and B-222 Includes above plus 1 R-520 core housing Extension tubing 50’ length Extension tubing 100’ length

HALR-760-50

PT VALVE SYSTEM COMPONENTS The PT Valve System allows user to monitor tire pressure with an easy to read, liquid filled dial gauge attached to the valve. Calibrated 0-160 psi. HALPT-300-J-650

HALPT-Gauge

Cat. No. *HALPT-Gauge *HALPT-EX

Description LIQUID-FILLED DIAL GAUGE, easy to read LARGE BORE EXTENSION, allows for PT gauge installation on existing valves. Effective length 15/8” *HALPT-300-J-650 LARGE BORE SWIVEL VALVE with PT grooves and O-ring

HALPT-EX

*DENOTES SPECIAL ORDER ITEM

70

Pkg. Qty. 1 1 1

Haltec Standard and Arctic O-Rings for tubeless rims are manufactured to OEM specifications for a wide range of multipiece rim O-ring grooves. O-rings are produced in a standard compound for -40°F to 180°F, and Arctic compound for -65°F to 180°F applications.

OTR Tire & Wheel Service Products

ROD Ø

.26

.375

.50

O-RINGS Cat. No. OR24JM OR220TG OR224TG OR25T OR325T OR329T OR333T OR335T OR339T OR345T OR349T OR451T OR457T *HALOR-215-H *HALOR-463-T *HALOR-469-T

Application & Rim Ø Highway (JM) 24” Grader 20” Grader 24” Earthmover (small) 25” Earthmover 25” Earthmover 29” Earthmover 33” Earthmover 35” Earthmover 39” Earthmover 45” Earthmover 49” Earthmover 51” Earthmover 57” Grader/Highway 15” Earthmover 63” Earthmover 69”

Rod Ø .26 .26 .26 .26 .375 .375 .375 .375 .375 .375 .375 .50 .50 .28 .50 .50

Qty. Bag / Case 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24 2 / 24

*Indicates special order items. Add suffix “A” to Cat. No. to order Arctic compound O-rings.

L-RING SEALS FOR EARTHMOVER RIMS

Cat. No. Description *HALLR-25 25” L-RING SEAL *HALLR-29 29” L-RING SEAL *HALLR-33 33” L-RING SEAL *HALLR-35 35” L-RING SEAL *HALLR-39 39” L-RING SEAL *HALLR-45 45” L-RING SEAL *HALLR-49 49” L-RING SEAL *HALLR-51 51” L-RING SEAL *HALLR-57 57” L-RING SEAL *HALLR-63 63” L-RING SEAL *HALLR-69 69” L-RING SEAL *Indicates special order items.

VALVES & VALVE HARDWARE

L-ring seals for earthmover rims help provide an airtight seal between the tire bead and rim bead seat area when the two components are not completely compatible. Pkg. Qty. 1 1 1 1 1 1 1 1 1 1 1

IMPORTANT INFORMATION • L-ring seals are not a cure for damaged beads nor damaged wheels and rims. Caution should be used during all tire fitments. Do not install where broken bead is suspected. • Always follow respective manufacturers’ recommendation for proper bead-lubrication and initial air pressure to properly seat beads. • If you have any questions regarding the use of the L-Ring Seals, contact Tech prior to attempting any installation.

71

TECH Valve Repair Tools and Accessories

Tech valve repair tools and accessories are ideal for making valve installations, removal, and repairs easier, simpler and less time consuming. Tech has a complete line of valve installation, removal and repair tools to fit any repair person’s need.

VALVE CORE REPAIR TOOLS Cat. No. VH604 VH605 VH608

VHJ608

VH604 VH608

VH605

Description 2-WAY VALVE REPAIR TOOL, combination valve core driver and deflating pin, deeply knurled for easy handling 4-WAY VALVE REPAIR TOOL, repairs and reconditions inside and outside valve threads, inserts and removes cores HEAVY DUTY 4-WAY VALVE REPAIR TOOL, repairs and reconditions inside and outside valve threads, inserts and removes cores 4-WAY VALVE REPAIR TOOL, repairs and reconditions inside and outside valve threads, inserts and removes cores. Designed for large bore

VHJ604

VALVE CORE INSTALLATION/REMOVAL TOOLS Cat. No. VH609 VH670

VH670

VH674 VH609

Description VALVE CORE TORQUE TOOL EXTRA LONG VALVE CAP TOOL for hard to reach valve cap installation and removal (not shown) VH673 RED HANDLE VALVE CORE TOOL for standard valve cores VH674 HEX VALVE CORE TOOL designed for use with wrench while installing and removing valve cores VH675 RED HANDLE VALVE CORE TOOL for large & standard valve cores VALVEPAL VALVE CAP REMOVER

VH675 VH673

VALVE INSTALLATION TOOLS VALVES & VALVE HARDWARE

Cat. No. VH671

VH671

VH672 VH678

Description QUICK MOUNT/DEMOUNTING VALVE TOOL for snap-in tubeless tire valves LEVER MOUNTING TOOL for snap-in tubeless tire valves HEX NUT DRIVER with hollow shaft to accept and tighten metal valve stems

VH672

VH678

VALVE FISHING TOOLS & TUBE DEFLATORS Cat. No. VH606 VH607

VH607 VH3215 VH3216 VH3215 VH3216

VH606

72

Description CABLE-TYPE VALVE FISHING TOOL aids in installation of tube type tires CHAIN-TYPE VALVE FISHING TOOL aids in installation of tube type tires TUBE DEFLATOR – single piece screw-on deflator for rapid evacuation of air from tube CLIP-ON, HEAVY-DUTY TUBE DEFLATOR for rapid evacuation of air from tube

TECH Valve Repair Tools and Accessories VALVE CORE EJECTORS & LIQUID FILLING Cat. No. VH598 VH598

VH599

VH599RK *HAL307

VH599

*HALIN-20

Description AIR WATER ADAPTOR permits filling of tire with fluid or ballast from standard water hose TIRE FILLING AND CORE EJECTOR for filling or evacuation of liquid from a tire. ½” female pipe thread will attach to calcium tire filling pumps. Adaptors included REPAIR KIT FOR VH599 URETHANE FILL ADAPTOR attaches directly to the urethane pump discharge host with a ½” female pipe thread. (not shown) PASSENGER TIRE CORE EJECTOR (shown on pg. 76)

*Denotes special order item

VH599RK

TREAD DEPTH GAUGES Cat. No. VH666

HALN-1410

HAL5131

Description TREAD DEPTH GAUGE, 3 sides calibrated 0-1” in 1/32” black markings. 3 sides calibrated mm in red markings. VH666CLR SAME AS VH666 WITH COLOR CODED SCALE *HALN-1410 OFF-HIGHWAY TIRE TREAD DEPTH GAUGE calibrated with 32nds on one side, other side in mm. Magnified sight glass for easy readability. Includes carrying holster. *HAL5131 OTR TREAD DEPTH GAUGE. 2 piece gauge made of slide tube and indicator. Calibrated 0-6” in 1/32” units and 7-152 mm units. *Denotes special order item

VALVES & VALVE HARDWARE

VH666CLR

VH666

73

TECH Air/Inflating Gauges

MASTER SERVICE GAUGE & LARGE BORE GAUGES Cat. No. VH667

Description MASTER SERVICE GAUGE, precision instrument for testing accuracy of tire gauges and meters. Calibrated 10–20 psi in 2 lb. units *HALGA-255 SWIVEL GAUGE designed for large bore valves. Head adjusts to fit valves with shields, right angle or straight on. 2-sided nylon bar, one side calibrated 10–150 psi in 2 lb. units. Other side kPa 80–1040. *HALGA-240 STRAIGHT-ON PENCIL GAUGE fits large and standard bore valves. Designed to clip in shirt pocket. 4-sided nylon bar, 2 sides calibrated 20–120 psi in 2 lb. units. Other 2 sides kPa 150–800.

VH667

HALGA-255

*Denotes special order item HALGA-240

POCKET AIR GAUGES Cat. No. VH660

VHI661 VHI662

VH663

VH663 VHI662

Description AIR LIQUID TRACTOR GAUGE for air and liquid filled tires. 4-sided nylon bar, 2 sides calibrated 10–50 psi in 1 lb. units. Other 2 sides kPa 35–310. STANDARD PASSENGER GAUGE, 4-sided nylon bar, 2 sides calibrated 10–50 psi in 1 lb. units. Other 2 sides kPa 75–340. TRUCK PENCIL GAUGE, 4-sided nylon bar, 2 sides calibrated 20–120 psi in 2 lb. units. Other 2 sides kPa 150–810. LOW-LOW PRESSURE GAUGE, 4-sided nylon bar, 2 sides calibrated 1–20 psi in ½ lb. units. Other 2 sides kPa 10–135.

VHI661

VH660

DUAL FOOT AIR GAUGES Cat. No. VHI664 VHI665 AIR SERVICE PRODUCTS

VHI669

VHI668 VHI668

VHI669 VHI665

Description DUAL FOOT TRUCK GAUGE, 4-sided nylon bar, 2 sides calibrated 20–120 psi in 2 lb. units. Other 2 sides kPa 150–810. DUAL FOOT SERVICE GAUGE, 2-sided nylon bar, one side calibrated 10–50 psi in 2 lb. units. Numbers at 10 lb. intervals. Other side kPa 80–1040. STRAIGHT PUSH-ON 30° REVERSE ANGLE SERVICE GAUGE for standard bore valves. 2-sided nylon bar, one side calibrated 10–50 psi in 2 lb. units. Numbers at 10 lb. intervals. Other side kPa 80–1040. STRAIGHT PUSH-ON 30° REVERSE ANGLE TRUCK GAUGE 4-sided nylon bar, 2 sides calibrated 20–120 psi in 2 lb. units. Other 2 sides kPa 150–810.

VHI664

INFLATING GAUGES Cat. No. VH651 VH651 or VH652

VH651RH VH652 VH653

VH652RH VH653

74

Description HEAVY-DUTY INFLATING GAUGE, lightweight aluminum body with brass movement. 3-sided bar, 2 sides calibrated 10–120 psi in 2 lb. increments. One side kPa 70–800. 3 ft., .91m hose with clip-on air chuck. OSHA compliant. REPLACEMENT HOSE for VH651, 3 ft., .91m (not shown) HEAVY-DUTY INFLATING GAUGE, lightweight aluminum body with brass movement. 3-sided bar, 2 sides calibrated 10–120 psi in 2 lb. increments. One side kPa 70–800. 6 ft., 1.82m hose with clip-on air chuck. OSHA compliant. REPLACEMENT HOSE for VH652, 6 ft., 1.82m (not shown) HEAVY-DUTY INFLATING GAUGE, lightweight aluminum body with brass movement. 3-sided bar, 2 sides calibrated 10–120 psi in 2 lb. increments. One side kPa 70–800. 1 ft., .3048m hose with dual-foot chuck.

TECH Premium Air/Inflating Gauges & Chucks

Each of Tech’s premium pocket and dual foot air gauges has a high tech, epoxy coated black finish with silver trim that will withstand extended exposure to salt spray, harsh chemical environments, even petroleum products such as gasoline and oil. Importantly, the premium dual foot design features a tapered head, which guides both the air chuck and gauge over the valve stem for a direct, positive contact seal. The tapered head reduces air seepage from around the valve for increased accuracy when inflating the tire or when gauging the tire’s air pressure. The airtight seal will reduce labor time by eliminating the aggravation and time spent attempting to properly inflate tires or gauge air pressure. PREMIUM DUAL FOOT CHUCKS Cat. No. VHIH698

VHIH698

VHP698L

VHP698L

Description PREMIUM DUAL FOOT STRAIGHT PUSH-ON 30° REVERSE ANGLE LOCK-ON CLOSED CHUCK, tapered head design for a positive valve contact. Straight-on/30° reverse angle closed chuck with threaded deep well lock nuts which lock onto valve when tilted. 1/4" female N.P.T., 6", 150mm length. Black and silver premium finish. PREMIUM DUAL FOOT STRAIGHT PUSH-ON 30° REVERSE ANGLE EXTRA LONG LOCK-ON CLOSED CHUCK, tapered head design for a positive valve contact. Straight-on/30° reverse angle chuck with threaded deep well lock nuts which lock onto valve when tilted. Extra long 14", 355mm length for the difficult to reach tire valve. 1/4" female N.P.T. Black and silver premium finish.

PREMIUM DUAL FOOT AIR GAUGES Cat. No. VHI665M

VHIH668

Description PREMIUM H.D. METAL BAR DUAL FOOT SERVICE GAUGE tapered head design to allow a precise fit when checking air pressure. 2-sided heavy-duty metal bar. One side calibrated in 10–150 psi in 2 lb. units. Numbers at 10 lb. intervals with 5 lb. marker between. Other side calibrated 80 to 1040 kPa. Metal and chrome finish. PREMIUM STRAIGHT PUSH-ON 30° REVERSE ANGLE SERVICE GAUGE, tapered head design to allow a precise fit when using the straight chuck for inside dual wheels and a 30° reverse angle for outside wheels. 4-sided nylon bar. 2 sides calibrated 10–150 psi in 2 lb. units. Numbers at 10 lb. intervals with 5 lb. marker between. Other 2 sides calibrated 80–1040 kPa. Black and silver premium finish. AIR SERVICE PRODUCTS

GAUGE CHECKING STATION Cat. No. Description *HALGCS-A LARGE 4” LIQUID-FILLED GAUGE, 2 lb. graduated increments, max operating pressure 160 psi. Accuracy +/- 1% full scale. Dimensions 83/8” W x 7” H x 5” D. Includes in-line air filter and regulator. Works with standard and large bore air inflation gauges. *Denotes special order item

HALGCS-A

75

TECH Automatic Tire Inflators AUTOMATIC TIRE INFLATOR & ACCESSORIES Ideal for retail service centers and automobile dealerships. Cat. No. *HAL89XDA

HALIN-20

HAL89XDA

HAL89HKC-25C

HAL89-3WTK

Description AUTOMATIC TIRE INFLATION SYSTEM, heavy duty, weatherproof. Self-calibrates every 6 minutes. Accurate to within .3 psi. ¼” inlet and outlet. *HAL89HKC-12 12’ STRAIGHT HOSE with CH-360S AIR CHUCK *HAL89HKC-24 24’ STRAIGHT HOSE with CH-360S AIR CHUCK *HAL89HKC-50 50’ STRAIGHT HOSE with CH-360S AIR CHUCK *HAL89HKC-25C 25’ BLUE COIL HOSE with CH-360S AIR CHUCK *HAL89HKC-50C 50’ BLUE COIL HOSE with CH-360S AIR CHUCK *HAL89HKT-12 12’ STRAIGHT HOSE with COUPLER & CH-330 LO-OP AIR CHUCK *HAL89HKT-24 24’ STRAIGHT HOSE with COUPLER & CH-330 LO-OP AIR CHUCK *HAL89HKT-50 50’ STRAIGHT HOSE with COUPLER & CH-330 LO-OP AIR CHUCK *HAL89HKI-25 25’ STRAIGHT HOSE with COUPLER & IN-20 AIR CHUCK *HAL89-2WASV 2-WAY AUTOMATIC SWITCHING VALVE (2 hoses) *HAL89-3WASV 3-WAY AUTOMATIC SWITCHING VALVE (3 hoses) *HAL89-3WTK 3-WAY AUTOMATIC SWITCHING VALVE KIT (tubing system) *HALCH-360-OP-1 CLIP-ON STYLE AIR CHUCK (open) *HALCH-330-LO-OP LOCK ON STYLE AIR CHUCK (dual wheels) *HALIN-20 CORE REMOVING AND INFLATION TOOL (car) *HALSTAND-4 4’ YELLOW MOUNTING STEEL STAND with SQUARE BASE *Denotes special order item

MULTIPLE TIRE INFLATION SYSTEM & ACCESSORIES Designed specifically for inflating large OTR tires or multiple truck tires. Ideal for fleet operations and commecial tire service centers AIR SERVICE PRODUCTS

HAL89XDB

HAL89HKC-12M

Cat. No. *HAL89XDB

Description HIGH VOLUME ELECTRONIC TIRE INFLATOR, accurate to within .3 psi. ½” inlet and outlet. Inflates 1-4 tire simultaneously. *HAL89HKC-12M 12’ STRAIGHT HOSE with CH-360S AIR CHUCK *HAL89HKC-24M 24’ STRAIGHT HOSE with CH-360S AIR CHUCK *HAL89HKT-12M 12’ STRAIGHT HOSE with CH-330-LO AIR CHUCK *HAL89HKT-24M 24’ STRAIGHT HOSE with CH-330-LO AIR CHUCK *HAL89HVI-25 25’ STRAIGHT HOSE with COUPLER & IN-20 AIR CHUCK (single tire application) *HAL89-HMVN 4-WAY MANIFOLD *HAL89-3W AIR FLOW CONTROL VALVE *HALCH-360S CLIP ON STYLE CHUCK (closed) with SPRING *HALCH-330-LO-OP LOCK ON STYLE AIR CHUCK (dual wheels) *HALSTAND-4 4’ YELLOW MOUNTING STEEL STAND with square base *Denotes special order item

HAL89-3W

76

TECH Chucks & Chuck Repair Kits

EUROPEAN STYLE CLIP-ON AIR CHUCKS Cat. No. VH686 VH687 VH688 VH688

VH689

VH689

Description CLOSED END EUROPEAN STYLE CLIP ON AIR CHUCK same at VH688 except has ¼” N.P.T. female thread (not shown) OPEN END EUROPEAN STYLE CLIP ON AIR CHUCK same at VH689 except has ¼” N.P.T. female thread (not shown) OPEN END EUROPEAN STYLE AIR CHUCK AND CLIP for use on in-line gauges, barbed end CLOSED CHECK EUROPEAN STYLE AIR CHUCK AND CLIP, barbed end

AIR CHUCKS & CLIP Cat. No. VHI690 VHI691 VHI692 VHI691 or VHI692

VHI693 VH694 or VH695

VH694 VHJ6105

VHI690

VH695

VHJ6105

Description BALL FOOT AIR CHUCK, ¼” female N.P.T. BALL FOOT AIR CHUCK, ¼” female N.P.T. clip firmly locks onto valve while inflating tire OPEN CHECK BALL FOOT AIR CHUCK AND CLIP for use on air-line gauges, ¼” female N.P.T. AIR CHUCK CLIP, with heavy-duty spring, firmly holds chuck onto valve while inflating tire OPEN CHECK LOCK-ON CHUCK securely locks onto valve when pushed forward. Released when sleeve is pulled back. For use on air-line gauges, ¼” female N.P.T. CLOSED CHECK LOCK-ON AIR CHUCK securely locks onto valve when pushed forward. Released when sleeve is pulled back. ¼” female N.P.T. CLIP-ON AIR CHUCK for large bore. Locks on valve when clip is pushed forward. ¼” female N.P.T.

VHI693

DUAL FOOT CHUCKS Cat. No. VHI696

VHI698 VHJ6100

VHJ6102

VHJ6100 VHJ6102 VHI696

AIR SERVICE PRODUCTS

VHI698

Description DUAL FOOT EXTENSION CLOSED CHUCK, for hard-to-reach valves on tractor, dual-wheel truck and bus tires, ¼” female N.P.T., nickel plated DUAL FOOT STRAIGHT-ON AND 30° REVERSE ANGLE LOCK-ON AIR CLOSED CHUCK, for hard-to-reach valves on tractor, dual-wheel truck and bus tires, ¼” female N.P.T., nickel plated RIGHT ANGLE CHUCK accepts large and standard bore valves, ¼” female N.P.T. LARGE BORE (LONG) LOCK-ON AIR CHUCK chuck locks on valve threads, ¼” female N.P.T.

TECH Rubber Air Hose RAH1225

RAH1250

Tech’s tough, durable EPDM rubber hose has a working pressure of 300 psi (2068 kPa). The recommended working temperature range is -40°F (-40°C) to +185°F (85°C). RUBBER AIR HOSE Cat. No. RAH1225 RAH1250 RAH12700 RAH14700 RAH3825 RAH3850 RAH38700 *AMF855 AH440

AH440

RAH12700

RAH14700

Description RUBBER AIR HOSE, ½”, 15mm x 25’, 7m, with fittings RUBBER AIR HOSE, ½”, 15mm x 50’, 15m, with fittings RUBBER AIR HOSE, ½”, 15mm x 700’, 213m RUBBER AIR HOSE, ¼”, 6mm x 700’, 213m RUBBER AIR HOSE, 3/8”, 10mm x 25’, 7m, with fittings RUBBER AIR HOSE, 3/8”, 10mm x 50’, 15m, with fittings RUBBER AIR HOSE, 3/8”, 10mm x 700’, 213m HOSE CRIMPER HEAVY DUTY, special order (not shown) RUBBER AIR HOSE. Supply three air-operated air tools from a single hose. Aluminum manifold with ¼” NPT threaded inlet, three ¼” NPT threaded outlets.

*Denotes special order item

77

TECH Air Couplers

E-Z MATE COUPLERS

E-Z Mate Couplers eliminate back pressure during air tool connections. Cat. No. VHCEZ14 VHCEZ12

VHC50

VHCEZ12 VHCEZ14

Description ¼” BODY, ¼” N.P.T. ½” BODY, ½” N.P.T.

Use With Industrial Fittings VHC27, VHC28 VHC27, VHC28

TRIPLE INTERCHANGE COUPLER Cat. No. VHC50

Description ¼” TRIPLE INTERCHANGE COUPLER for Industrial, Tru-flate and ARO-type nipples. Max. 150 psi.

INDUSTRIAL INTERCHANGE TYPE INDUSTRIAL INTERCHANGE TYPE

ARO TYPE

Cat. No. VHC15 VHC27 VHC28

Description ¼” BODY, ¼” FEMALE N.P.T. ¼” NIPPLE, ¼” MALE N.P.T ¼” NIPPLE, ¼” FEMALE N.P.T.

ARO TYPE

VHC15

Cat. No. VHC75 VHC77 VHC78

VHC75

VHC27

VHC77

VHC28

Description ¼” BODY, ¼” FEMALE N.P.T. ¼” NIPPLE, ¼” MALE N.P.T ¼” NIPPLE, ¼” FEMALE N.P.T.

VHC78

TRU-FLATE TYPE TRU-FLATE TYPE

LINCOLN TYPE

Cat. No. VHC85 VHC83 VHC84 *HALNI-106

Description ¼” BODY, ¼” FEMALE N.P.T. ¼” NIPPLE, ¼” MALE N.P.T ¼” NIPPLE, ¼” FEMALE N.P.T. ¼” NIPPLE, Fits 302” – 32 thread (screws directly onto truck valve system)

*Denotes special order item

LINCOLN TYPE

VHC83

VHC85

VHC90

VHC91

AIR SERVICE PRODUCTS

VHC84

VHC92

Cat. No. VHC90 VHC91 VHC92

Description ¼” BODY, ¼” FEMALE N.P.T. ¼” NIPPLE, ¼” MALE N.P.T ¼” NIPPLE, ¼” FEMALE N.P.T.

TRU-FLATE TYPE TRU-FLATE TYPE

TRU-FLATE TYPE

Cat. No. VHC803 VHC809 VHC810

Description 3/8” BODY, ¼” FEMALE N.P.T. 3/8” NIPPLE, ¼” MALE N.P.T 3/8” NIPPLE, ¼” FEMALE N.P.T.

TRU-FLATE TYPE

VHC809

VHC803

VHC805

Cat. No. VHC805 VHC807 VHC808

Description 3/8” BODY, 3/8” FEMALE N.P.T. 3/8” NIPPLE, 3/8” MALE N.P.T 3/8” NIPPLE, 3/8” FEMALE N.P.T.

VHC807

VHC810

VHC808

INDUSTRIAL TYPE Cat. No. VHC37 VHC38

TRU-FLATE TYPE

Description 3/8” NIPPLE, 3/8” MALE N.P.T. 3/8” NIPPLE, 3/8” FEMALE N.P.T

TRU-FLATE TYPE Cat. No. VHC815 VHC817 VHC818

VHC818

78

VHC817

VHC815

Description ½” BODY, ½” FEMALE N.P.T. ½” NIPPLE, ½” MALE N.P.T ¼” NIPPLE, ½” FEMALE N.P.T.

TECH Impact Wrenches

Tech is pleased to offer a selection of high-performance impact wrenches and kits from Chicago Pneumatic. In keeping with Tech’s adherence to quality, CP guarantees high performance through strict testing and quality inspections. All products are thoroughly tested in the CP Technocenter to pass EC certifications according to ISO Standards. CHICAGO PNEUMATIC IMPACT WRENCHES Cat. No. CP772H CP797-6 *CP7729 CP7733-2

CP797-6

CP749-2 CP7782-6

Description HEAVY DUTY ¾” IMPACT WRENCH SUPER DUTY 1” IMPACT WRENCH HEAVY DUTY ½” IMPACT WRENCH HEAVY DUTY ½” IMPACT WRENCH WITH 2” (51mm) EXTENDED ANVIL SUPER DUTY ½” IMPACT WRENCH 1” IMPACT WRENCH WITH 6” ANVIL

*Denotes special order item

CP749-2

CP772H CP7733-2

PART NUMBER

OUTPUT DRIVE

FREE SPEED RPM

FT. LB.

NM

FT. LB.

NM

CFM

L/S

CFM

L/S

IN.

MM

LB.

KG

NPTF

CP772H

T024351

¾

4,200

150-700

203-949

1,000

1,356

6.0

2.8

24

11.3

9.6

245

10.5

4.8

¼”

CP797-6

T013901

1

4,200

150-900

203-1,220

1,400

1,898

10.0

4.7

40

18.9

22.2

565

29.8

13.5

½”

CP7733-2

8941077332

½

6,900

25-400

35-542

550

746

4.7

2.2

19

9.0

9.1

231

5.9

2.7

¼”

CP749-2

T024673

½

6,400

50-450

68-610

625

827

5.5

2.6

22

10.4

9.0

229

5.8

2.6

¼”

CP7782-6

8941077B26

5,160

440-1850

CP871K

T025372

22,000

3.2

1.5

13

6.1

8.0

203

1.7

0.79

¼”

CP873K

T025374

2,800

3.2

1.5

13

6.1

8.3

210

2.2

1.02

¼”

CP9288

6151949288

600

6

2.8

24

11.3

9.9

251

3.3

1.51

¼”

WORKING TORQUE (REV)

MAX TORQUE (FW)

2140

14.8

AVERAGE AIR CONS.

AIR CONS. @ LOAD

OVERALL LENGTH

NET WEIGHT

IMPACT WRENCHES & SOCKETS

MODEL

AIR INLET

10

20.0

79

Grey Pneumatic Impact Sockets ½” DRIVE FLIP SOCKETS Cat. No. 315-2146DT 315-2192DT 315-1504FW

315-2346D

315-2392D

315-2349D

Description EXTRA THIN WALL EXTRA THIN WALL THIN WALL FLIP SOCKET SET includes: 315-2346D ¾” x 13/16” 315-2349D 7/8” x 15/16” 315-2392D 19mm x 21mm 315-2351D 1” x 11/16”

315-2351D

315-1319 – ½” DRIVE FRACTIONAL IMPACT SOCKET 19 PIECE MASTER SET IMPACT WRENCHES & SOCKETS

19 PIECE MASTER SET includes: Cat. No. Size Cat. No. Size 3/8” 315-2012R 315-2032R 1” 7/16” 315-2014R 315-2034R 11/16” 315-2016R ½” 315-2036R 11/8” 9/16” 315-2018R 315-2038R 13/16” 5/8” 315-2020R 315-2040R 1¼” 11/16” 315-2022R 315-2042R 15/16” 315-2024R ¾” 315-2044R 13/8” 13/16” 315-2026R 315-2046R 17/16” 7/8” 315-2028R 315-2048R 1½” 15/16” 315-2030R 315-1312 13 PIECE SET includes hex sizes 7/16” though 1¼” *Note: Replace suffix R with suffix D for Deep Well Sockets. Sockets may be ordered individually.

315-1326M – ½” DRIVE METRIC IMPACT SOCKET 26 PIECE MASTER SET 26 PIECE MASTER SET includes: Cat. No. Size Cat. No. Size 315-2010M 10mm 315-2023M 23mm 315-2011M 11mm 315-2024M 24mm 315-2012M 12mm 315-2025M 25mm 315-2013M 13mm 315-2026M 26mm 315-2014M 14mm 315-2027M 27mm 315-2015M 15mm 315-2028M 28mm 315-2016M 16mm 315-2029M 29mm 315-2017M 17mm 315-2030M 30mm 315-2018M 18mm 315-2032M 32mm 315-2019M 19mm 315-2033M 33mm 315-2020M 20mm 315-2034M 34mm 315-2021M 21mm 315-2035M 35mm 315-2022M 22mm 315-2036M 36mm 315-1412M 14 PIECE SET includes hex sizes 10mm through 19mm, 21mm, 22mm, 26mm and 27mm *Note: Use suffix MD for Deep Well Sockets. Sockets may be ordered individually.

80

Hex Size ¾” x 13/16” 19mm x 21mm

Grey Pneumatic Impact Sockets 315-1719 – ½” DRIVE 12-POINT FRACTIONAL IMPACT SOCKET 19 PIECE MASTER SET 19 PIECE MASTER SET includes: Cat. No. Size Cat. No. 3/8” 315-2112R 315-2132R 7/16” 315-2114R 315-2134R 315-2116R ½” 315-2136R 9/16” 315-2118R 315-2138R 5/8” 315-2120R 315-2140R 11/16” 315-2122R 315-2142R 315-2124R ¾” 315-2144R 13/16” 315-2126R 315-2146R 7/8” 315-2128R 315-2148R 15/16” 315-2130R

Size 1” 11/16” 11/8” 13/16” 1¼” 15/16” 13/8” 17/16” 1½”

*Note: Replace suffix R with suffix D for Deep Well Sockets. Sockets may be ordered individually.

26 PIECE MASTER SET includes: Cat. No. Size Cat. No. 315-2110M 10mm 315-2123M 315-2111M 11mm 315-2124M 315-2112M 12mm 315-2125M 315-2113M 13mm 315-2126M 315-2114M 14mm 315-2127M 315-2115M 15mm 315-2128M 315-2116M 16mm 315-2129M 315-2117M 17mm 315-2130M 315-2118M 18mm 315-2132M 315-2119M 19mm 315-2133M 315-2120M 20mm 315-2134M 315-2121M 21mm 315-2135M 315-2122M 22mm 315-2136M

IMPACT WRENCHES & SOCKETS

315-1726M – ½” DRIVE 12-POINT METRIC IMPACT SOCKET 26 PIECE MASTER SET Size 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm 32mm 33mm 34mm 35mm 36mm

*Note: Use suffix MD for Deep Well Sockets. Sockets may be ordered individually.

½” DRIVE ADAPTORS AND EXTENSIONS Cat. No. 315-2228A 315-2238A 315-2229UJ 315-2243E 315-2243EH 315-2245E 315-2245EH 315-2247E

315-2228A

315-2229UJ

Description ½” Female x 3/8” Male ADAPTOR ½” Female x ¾” Male ADAPTOR ½” x ½” UNIVERSAL JOINT 3” EXTENSION 3” HEAVY DUTY EXTENSION 5” EXTENSION 5” HEAVY DUTY EXTENSION 7” EXTENSION

315-2243E

81

Grey Pneumatic Impact Sockets 315-8029 – ¾” DRIVE FRACTIONAL IMPACT SOCKET 29 PIECE MASTER SET 29 PIECE MASTER SET includes: Cat. No. Size Cat. No. 315-3024R ¾” 315-3044R 13/16” 315-3026R 315-3046R 7/8” 315-3028R 315-3048R 15/16” 315-3030R 315-3050R 315-3032R 1” 315-3052R 315-3034R 11/16” 315-3054R 315-3036R 11/8” 315-3056R 315-3038R 13/16” 315-3058R 315-3040R 1¼” 315-3060R 315-3042R 15/16” 315-3062R

Size 13/8” 17/16” 1½” 19/16” 15/8” 111/16” 1¾” 113/16” 17/8” 115/16”

Cat. No. 315-3064R 315-3066R 315-3068R 315-3070R 315-3072R 315-3074R 315-3076R 315-3078R 315-3080R

Size 2” 21/16” 21/8” 23/16” 2¼” 25/16” 23/8” 27/16” 2-12”

Cat. No. 315-3038M 315-3040M 315-3041M 315-3042M 315-3043M 315-3044M 315-3046M 315-3050M

Size 38mm 40mm 41mm 42mm 43mm 44mm 46mm 50mm

*Note: Replace suffix R with suffix D for Deep Well Sockets. Sockets may be ordered individually.

315-8026M – ¾” DRIVE METRIC IMPACT SOCKET 26 PIECE MASTER SET

IMPACT WRENCHES & SOCKETS

26 PIECE MASTER SET includes: Cat. No. Size Cat. No. 315-3019M 19mm 315-2028M 315-3020M 20mm 315-3029M 315-3021M 21mm 315-3030M 315-3022M 22mm 315-3031M 315-3023M 23mm 315-3032M 315-3024M 24mm 315-3033M 315-3025M 25mm 315-3034M 315-3026M 26mm 315-3035M 315-3027M 27mm 315-3036M

Size 28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm

*Note: Use suffix MD for Deep Well Sockets. Sockets may be ordered individually.

¾” DRIVE COMBINATION BUDD WHEEL SOCKETS Cat. No. 315-3223C 315-3235MC 315-3241MC

Description COMB. BUDD WHEEL SOCKET COMB. BUDD WHEEL SOCKET COMB. BUDD WHEEL SOCKET

Hex Size 1½” 35mm 41mm

Square Size 13/16” 17mm 21mm

315-3223C

¾” DRIVE ADAPTORS Cat. No. 315-3008A 315-3008AL 315-3009A 315-3009AB 315-3009AL

315-3008A

82

Socket Retention Description FRICTION BALL ADAPTOR LOCKING PIN ADAPTOR PIN HOLE ADAPTOR FRICTION BALL ADAPTOR LOCKING PIN ADAPTOR

Female End ¾” ¾” ¾” ¾” ¾”

Male End ½” ½” 1” 1” 1”

Grey Pneumatic Impact Sockets 1” DRIVE FRACTIONAL SOCKETS Cat. No. 315-4024R 315-4026R 315-4028R 315-4030R 315-4032R 315-4034R 315-4036R 315-4038R 315-4040R 315-4042R 315-4044R

Size ¾” 13/16” 7/8” 15/16” 1” 11/16” 11/8” 13/16” 1¼” 15/16” 13/8”

Cat. No. 315-4046R 315-4048R 315-4050R 315-4052R 315-4054R 315-4056R 315-4058R 315-4060R 315-4062R 315-4064R

Size 17/16” 1½” 19/16” 15/8” 111/16” 1¾” 113/16” 17/8” 115/16” 2”

*Note: Replace suffix R with suffix D for Deep Well Sockets

1” DRIVE FRACTIONAL SOCKETS

315-4027M

315-4033M

Size 19mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm 31mm

Cat. No. 315-4032M 315-4033M 315-4035M 315-4036M 315-4038M 315-4040M 315-4041M 315-4042M 315-4043M 315-4046M 315-4050M 315-4052M

Size 32mm 33mm 35mm 36mm 38mm 40mm 41mm 42mm 43mm 46mm 50mm 52mm

IMPACT WRENCHES & SOCKETS

Cat. No. 315-4019M 315-4021M 315-4022M 315-4023M 315-4024M 315-4025M 315-4026M 315-4027M 315-4028M 315-4029M 315-4030M 315-4031M

*Note: Use suffix MD for Deep Well Sockets

1” DRIVE COMBINATION BUDD WHEEL SOCKETS Cat. No. 315-4223C 315-4235MC 315-4238MC 315-4241MC

Description COMB. BUDD WHEEL SOCKET COMB. BUDD WHEEL SOCKET COMB. BUDD WHEEL SOCKET COMB. BUDD WHEEL SOCKET

Hex Size 1½” 35mm 38mm 41mm

Square Size 13/16” 17mm 20mm 21mm

315-4223C

1” DRIVE 4-POINT (SQUARE) STANDARD LENGTH SOCKETS

315-4313S

Cat. No. 315-4313S 315-4313SHD 315-4315S 315-4317S 315-4319S

Description SQUARE SOCKET HEAVY DUTY SQUARE SOCKET SQUARE SOCKET SQUARE SOCKET SQUARE SOCKET

315-4320S 315-4321S

SQUARE SOCKET SQUARE SOCKET

Hex Size 13/16” 13/16” 15/16” 17mm 19mm 20mm 21mm

315-4313SHD

83

Grey Pneumatic Impact Sockets 1” DRIVE ADAPTORS Cat. No. 315-4008A 315-4008AB 315-4008AL 315-4009A

Socket Retention Description PIN HOLE ADAPTOR FRICTION BALL ADAPTOR LOCKING PIN ADAPTOR PIN HOLE ADAPTOR

Female End 1” 1” 1” 1”

Male End ¾” ¾” ¾” 1½”

315-4008A

1” DRIVE EXTENSIONS

IMPACT WRENCHES & SOCKETS

Cat. No. 315-4003E 315-4003EL 315-4007E 315-4007EL 315-4010E 315-4010EL 315-4013E 315-4013EL

Description 3” EXTENSION 3” EXTENSION 7” EXTENSION 7” EXTENSION 10” EXTENSION 10” EXTENSION 13” EXTENSION 13” EXTENSION

Retention Device PIN HOLE LOCKING PIN PIN HOLE LOCKING PIN PIN HOLE LOCKING PIN PIN HOLE LOCKING PIN

315-4007EL

1” DRIVE UNIVERSAL JOINTS Cat. No. 315-4006UJ 315-4006HUJ

Description 1” X 1” 1” X 1” HEAVY DUTY

Retention Device PIN HOLE PIN HOLE

DISMOUNT TOOL Cat. No. TNT-100-1 315-4006UJ

TNT-200-1 TNT-200-M TNT-200-1

TNT-100 TNT-200

TNT-100-1

TNT-200-M

84

Description DISMOUNT TOOL - Demounts all tubeless tires 17.5" thru 24.5" and Super Singles up through 315, including most radial and bias ply tires. DISMOUNT TOOL FOR SUPER SINGLES Demounts tubeless tires 215 through 445, 17.5” to 24.5” MOUNT TOOL FOR ALL TUBELESS TIRES 17.5” to 24.5” SET INCLUDES TNT100-1 DISMOUNT AND TNT200-M MOUNT TOOLS SET INCLUDES TNT200-1 DISMOUNT AND TNT200-M MOUNT TOOLS

Qty. Ea.

Ea. Ea. Ea. Ea.

DISMOUNT TOOL REPLACEMENT PARTS Cat. No. TNT-100-3 TNT-100-8 TNT-100-9 TNT-100-10 TNT-100-11

Description HANDLE GRIP ROLL PINS FOR TINE ROLLER TINE ROLLERS MAIN ROLLER ROLL PIN FOR MAIN ROLLER

Qty. Ea. Ea. Ea. Ea. Ea.

TECH Wheel Fasteners & Service Tools DAYTON DEMOUNTABLE FASTENERS Cat. No. SIR715 SIR716 SIR149 SIR654 SIR993 SIR123 SIR235

SIR993

Description DAYTON WHEEL STUD, ¾” DAYTON HEX NUT, ¾” DAYTON HEX NUT, 5/8” DAYTON WHEEL STUD, 5/8” H22 RIM CLAMP, 1½” H01 RIM CLAMP, 11/8” H02 RIM CLAMP, 1¾”

Box Qty. 50 50 100 50 10 10 10

SIR235

SIR715 SIR654

SIR123

FLANGE NUTS FOR HUB PILOT WHEELS

TSN100

FILLS IN THE GAP BETWEEN THE STUD AND BOLT HOLE

26mm stud hole 22mm stud hole There is a fairly large tolerance between the diameter of each stud hole and the diameter of the stud itself.

SIR919

Box Qty. 25 10 10

SIR333B

SPECIAL GRAPHITE COATING PREVENTS NUT FROM RUSTING ONTO HUB Extended Threading allowing Skirt Nut to go down into Hub-Piloted Disc Wheel an extra 3/16” (5mm) into stud hole.

Description HEX FLANGE NUT, 33mm HEX FLANGE NUT, 30mm M22 HEX SKIRT FLANGE NUT, 33mm

WHEEL SERVICE PRODUCTS

Cat. No. SIR333B SIR919 TSN100

Skirt Nuts (left) reduce tolerances between studs and bolt holes in Hub Pilot wheels to reduce vibration and improve tread wear.

SKIRT NUT

CAP NUTS FOR STUD PILOT WHEELS Cat. No. SIR304L SIR304R SIR306L SIR306R SIR708ARY SIR709ALY SIR888RZ SIR889LZ SIR892ALY SIR896RY SIR896LY SIR897RY SIR897LY SIR912R SIR913L SIR988LY SIR988RY

Description METRIC OUTER CAP NUT, left METRIC OUTER CAP NUT, right METRIC INNER CAP NUT, left METRIC INNER CAP NUT, right INNER CAP NUT, right, 27/32” INNER CAP NUT, left, 27/32” OUTER CAP NUT, right OUTER CAP NUT, left OUTER CAP NUT, left INNER CAP NUT, right, 29/16” INNER CAP NUT, left, 29/16” INNER CAP NUT, right, 31/16” INNER CAP NUT, left, 31/16” EXTREME DUTY OUTER BUDD NUT, right EXTREME DUTY OUTER BUDD NUT, left INNER CAP NUT, right, 31/16” INNER CAP NUT, left, 31/16”

Box Qty. 10 10 10 10 25 25 25 25 25 25 25 25 25 25 25 25 25

85

TECH Wheel Service Tools

Wheel and Rim manufacturers and OHSA regulations state that rim mating surfaces and threads of hub and wheel assemblies must be free from rust and corrosion. Tech is pleased to offer new stud cleaning tools that make the job quick and easy. These tools have replaceable brushes and can be used with an impact wrench or drill. NOTE: ALWAYS WEAR EYE PROTECTION AND A MASK WHEN CLEANING CORRODED METAL SURFACES. STUD CLEANING TOOLS Cat. No. SBCT16 SCBR16 SBCT22 SCBR22

SBCT22

Description STUD CLEANING TOOL, 5/8”, 16mm REPLACEMENT BRUSH, 5/8”, 16mm STUD CLEANING TOOL, 7/8”, 22mm REPLACEMENT BRUSH, 7/8”, 22mm

Box Qty. 1 1 1 1

SBCT16 SCBR22

SCBR16

RIM CLEANING BRUSHES Cat. No. S894 RSB3 931 KEN30515

WHEEL SERVICE PRODUCTS

KEN30515

Description COARSE WIRE WHEEL, 2” TWISTED WIRE BRUSH, 3” VALVE HOLE CLEANING BRUSH HAND HELD WIRE BRUSH

Box Qty. 1 1 1 1

931

S894

RSB3

KENTOOL CAP NUT WRENCHES Cat. No. KEN30165 KEN30618 KEN30620

Description DUAL WHEEL STUD REMOVER TX241 HEAVY DUTY CAP NUT WRENCH, 41mm TX50 COMBINATION CAP NUT WRENCH

Box Qty. 1 1 1

KEN30620

KEN30618 KEN30165

ESCO NUT AND STUD REMOVERS

ESCO60301

ESCO60300

ESCO40100

86

Cat. No. Description *ESCO40100 5 PIECE KIT, removes ¾” and 5/8” studs, and 11/8” inner cap nuts *ESCO40107 BUDD INNER CAP NUT REMOVER, 11/8” *ESCO60300 DELUXE BUDD NUT WRENCH *ESCO60301 PORK CHOP STYLE CAP NUT WRENCH, 1½”, 38mm *Denotes special order item

Box Qty. 1 1 1 1

TECH Wheel Service Tools

Save-a-Stud Kits repair damaged threads on wheel studs, saving time and money. Wheel protectors prevent steel or aluminum rims from being scratched during fastener installation and removal. Save-a-Stud Kits feature a patented hinged design threaded dyes. Lifetime guarantee. E-Z Wheel Guards provide a thin barrier between wheel and hub mating surfaces or between dual wheels, preventing seized rims and galvanic corrosion from aluminum to steel contact. SAVE-A-STUD KITS Cat. No. *ESCO30120

*ESCO30125

Box Qty. 1

Description 8 PIECE KIT includes sizes: 7/16”-20, ½”-20, 9/16”-18, 5/8”-18, 12mm-1.25, 12mm-1.50, 12mm-1.75, 14mm-1.50 3 PIECE KIT includes sizes: ¾”-16 right, ¾”-16 left, 22-1.5mm

1

ESCO30125

ESCO30120

WHEEL PROTECTORS Cat. No. Description 990 STANDARD TOUGH POLYMER MATERIAL *ESCO50303 EXTRA TOUGH MATERIAL lasts 20 times longer than standard guard

Box Qty. 1 1 WHEEL SERVICE PRODUCTS

E-Z WHEEL GUARDS (SOLD INDIVIDUALLY) Cat. Hole Bolt No. Count Circle *ESCO60100 10 11¼” *ESCO60101 10 11¼” *ESCO60102 10 285.75mm *ESCO60104 10 335mm *ESCO60105 8 275mm *ESCO60106 8 6½” *ESCO60107 8 6½”

Stud Diameter 11/8”, 7/8” ¾” 22mm 22mm 20mm 4.82” ID, 5/8” 5.25” ID, 5/8”

*ESCO60108

8

225mm

6.75” ID, 5/8”

*ESCO60109

10

335mm, 13.189”

22mm

Wheel Application Stud Piloted Stud Piloted Hub Piloted Hub Piloted Hub Piloted GM & Dodge Oval Holes, Ford Locating Holes Ford 19.5” Budd Axle: Bus Wheels

CHROME LUG NUT PLIERS Cat. No. Description KEN30606 STANDARD CHROME NUT PULLER *ESCO50100 DELUXE CHROME NUT PLIERS

Box Qty. 1 1

KEN30606

*Denotes special order item

87

ESCO Bead Breakers & OTR Tire Service Accessories ESCO BEAD BREAKERS

E10101

Cat. No. E10100

Description GIANT TIRE/EARTH MOVER BEAD BREAKER Use on 5-piece rims 25” to 51” with pry bar/bead loosening pockets. E10101 COMBI BEAD BREAKER, works on single, two and three-piece truck tires/rims, including some new style wheels. *ESCO10102 MAXI BEAD BREAKER, newly designed, works on all 3-piece wheels that replace older 5-piece wheels. Designed to work on front or back of wheel with no attachments or accessories. E70160 MANUAL BEAD BREAKER

E70160

E10100

ESCO10102

Unit Weight 31 lb.

36 lb.

38 lb.

12 lb.

ESCO BREAKER KITS ESCO10200

ESCO10202

TIRE & RIM SERVICE PRODUCTS

ESCO10209

ESCO10207

Cat. No. Description *ESCO10207 BEAD BREAKER KIT FOR E10100, contains E10100 bead breaker, ESCO10500 3.5 quart pump, hose, and all couplers and adaptors. *ESCO10209 BEAD BREAKER KIT FOR E10100, contains E10100 bead breaker, ESCO10592 5 quart pump, hose, and all couplers and adaptors. *ESCO10200 BEAD BREAKER KIT FOR E10101, contains E10101 bead breaker, ESCO10500 3.5 quart pump, hose, and all couplers and adaptors. *ESCO10202 BEAD BREAKER KIT FOR E10101, contains E10101 bead breaker, ESCO10592 5 quart pump, hose, and all couplers and adaptors.

Unit Weight 57 lb.

68 lb.

60 lb.

71 lb.

ESCO PUMPS Cat. No. E10500

Description TURBO II AIR/HYDRAULIC PUMP 3.5 quart oil capacity *ESCO10543M CALCIUM CHLORIDE PUMP, pumps 34 gallons of calcium chloride per minute. Newly designed valve will not leak. Double diaphragm pump, 1:1 ratio, 10 foot hoses. *ESCO10592 AIR/HYDRAULIC PUMP, 5 quart oil capacity

E10500

Unit Weight 18 lb. 44 lb.

27 lb.

ESCO10592

ESCO JACKS Cat. No. Description E10312 LIGHTWEIGHT ALUMINUM JACK, 55 TON *ESCO10300 ALUMINUM JACK, 100 TON

Unit Weight 33 lb. 55 lb.

E10312

ESCO10300

ESCO TIRE MOUNT & DEMOUNT TOOLS

E70150

Cat. No. Description *ESCO70100 EASY-WAY™ TUBELESS TRUCK TIRE DEMOUNTING SYSTEM E70150 QUALITY HEAVY DUTY SLIDE HAMMER handles all tubeless truck tires 16.5”-24.5” diameter

ESCO70100

*Denotes special order item

88

Unit Weight 37 lb. 24 lb.

TECH Bead Breakers & OTR Tire Service Accessories

Tech International is pleased to offer AME, the world leader in tire changing and lifting equipment. AME offers a complete line of bead breakers, pumps and rams. AME also offers cylinders from 10 ton through 250 ton mining jacks and the cribbing to safely lift all sizes of equipment.

AME BEAD BREAKERS Cat. No. Description *AME11010 COMBI TIRE BEAD BREAKER

AME11010

*AME11000 OTR GIANT TIRE BEAD BREAKER *AME11075 DIAMONDBACK ALUMINUM BEAD BREAKER *AME11030 OTR 2000 GIANT TIRE BEAD BREAKER with 6” stroke *AME11044 OTR 3000 GIANT TIRE BEAD BREAKER with Universal Jaws Kit

AME11030

AME11075

AME11000

Works on Wheel Sizes Single, 2 & 3 Piece up to 25” 5 Piece Wheels 25” - 51” 3 Piece Wheels 25” & Larger 5 Piece Wheels 39” - 63” 5 Piece Wheels 51” - 63”

Weight lbs. / kg 34 / 15.42 33 / 14.96 34 / 15.42 52 / 23.58 54 / 24.49

*Denotes special item AME11044

AME HYDRAULIC RAMS Stroke in. / mm 21/8 / 53.98

Retracted Height in. / mm 4¾ / 120.65

Weight lbs. / kg 6 / 2.72

61/8 / 155.75

9¾ / 247.65

11 / 4.98

101/8 / 257.17

13¾ / 349.25

14 / 6.35

27/16 / 61.91

45/8 / 117.47

15 / 6.80

1 / 25

3.5 / 90

10 / 4.53

6¼ / 158.75

10¾ / 273.05

23 / 10.43

TIRE & RIM SERVICE PRODUCTS

Cat. No. Description *AME13010 10 TON HYDRAULIC CYLINDER *AME13030 10 TON HYDRAULIC CYLINDER *AME13050 10 TON HYDRAULIC CYLINDER *AME13060 30 TON HYDRAULIC CYLINDER *AME13070 10 TON LOW PROFILE CYLINDER KIT, with 1”, 2” & 3” Extensions *AME13100 25 TON CYLINDER *Denotes special item

HYDRAULIC PUMPS, HOSE & COUPLERS Cat. No. Description *AME15000 3.5 QT. TURBO II AIR HYDRAULIC PUMP 10,000 PSI / 700 Bar *AME15920 5 QT. AIR HYDRAULIC PUMP w/ STEEL RESERVOIR, 10,000 PSI / 700 Bar *AME16040 8’, 2.5m HYDRAULIC HOSE w/ 16050 HOSE HALF COUPLER, 10,000 PSI / 700 Bar *AME16050 HIGH FLOW HOSE HALF COUPLER 3/8” NPT 10,000 PSI / 700 Bar

Weight lbs. / kg 16 / 7.25 23 / 10.43 6 / 2.72 1 / .045

*Denotes special item

LIFTING AND CRIBBING Cat. Min. Height No. Description in. / mm *AME13121 55 TON ALUMINUM JACK 11¾ / 298 6” Stroke w/Saddle & Base *AME13000 100 TON ALUMINUM JACK 11¾ / 298 6” Stroke *AME15002 STEEL CRIBBING SET 3 / 76.2 3”, 6”, 9” *AME15230 INDUSTRIAL CRIBBING 6 / 152 BLOCK, 6”x7”x24” Black *AME15260 12 PIECE INDUSTRIAL 6 / 152 CRIBBING SET (15230) *AME14465 TITAN JACK PLATE 1.5 / 38 w/NON SKID SURFACE, 12”x12”x1.5”

Max Height in. / mm 17¾ / 451

Weight lbs. / kg 32 / 14.51

17¾ / 451

53 / 24.04

18 / 457

141 / 63.95

7 / 178

26 / 11.79

24 / 610

312 / 141.52

1.5 / 38

8 / 3.62

*Denotes special item

89

KEN-TOOL Tire & Rim Service Products TUBELESS TRUCK MOUNT/DEMOUNT IRONS Cat. No. KEN34645 KEN34645C KEN34644 KEN34647 KEN34747 KEN34748 KEN34749 KEN34847 KEN34848 *KEN34849

KEN34847 KEN34644 KEN34645

KEN34645C

Length in. / cm 37 / 94 37 / 94 37 / 94 41 / 104 36 / 91cm 36 / 91cm 22 / 56 52 / 132 49.5 / 126 27 / 69

Model T45A T45AC (classic) T45A-2000K T45HD T46A T46B T46C T47A T47B T47C

Diameter in. / mm ¾ / 20 ¾ / 20 ¾ / 20 7/8 / 22 ¾ / 20 ¾ / 20 ¾ / 20 1 / 25 1 / 25 1 / 25

Weight lbs. / kg 4.6 / 2.1 4.6 / 2.1 5 / 2.2 7 / 3.2 4.5 / 2 4.5 / 2 3 / 1.4 11 / 5 11 / 5 6.6 / 3

Length in. / cm 18 / 46 24 / 61 30 / 61 30 / 61

Diameter in. / mm 11/16 / 18 11/16 / 18 11/16 / 18 7/8 / 22

Weight lbs. / kg 1.8 / 8 2.5 / 1.1 3 / 1.4 4.8 / 2.2

Length in. / cm 18 / 46 24 / 61 30 / 76

Diameter in. / mm 11/16 / 18 11/16 / 18 7/8 / 22

Weight lbs. / kg 1.8 / 8 2.5 / 1.1 4.5 / 2

Length in. / cm 18 / 46 24 / 61 30 / 76 30 / 76

Diameter in. / mm 11/16 / 18 11/16 / 18 11/16 / 18 7/8 / 22

Weight lbs. / kg 1.8 / 8 2.5 / 1.1 3 / 1.4 4.5 / 2

TIRE MOUNT/DEMOUNT SPOONS STRAIGHT SPOONS Cat. No. KEN32101 KEN32119 KEN33219 *KEN33238

TIRE & RIM SERVICE PRODUCTS

KEN33219

Model T1X T19 T19A T38

DROP-CENTER SPOONS

KEN32120

Cat. No. KEN32121 *KEN34121 *KEN34122

KEN32121

Model T21R T21F T21HD

CURVED SPOONS Cat. No. KEN32102 KEN32120 KEN33220 KEN33239

Model T2X T20 T20A T39

KEN33195

BLUE COBRA AND 19.5” TIRE MOUNT/DEMOUNT TOOLS

KEN35440

Cat. No. KEN35440 *KEN33199 *KEN33196 *KEN31710 KEN31810 KEN33195

Length Model in. / mm BLUE COBRA 54 / 19.5 TIRE IRONS (SET OF 2) 38 / 19.5 BEAD HOLDER for Aluminum Wheels BRASS BEAD HOLDER for Steel Wheels LEATHER WHEEL PROTECTOR 19.5 TOOL SET, includes: KEN33199, KEN33196, KEN31710, KEN31810

Weight lbs. / kg 22 / 10 7 / 3.2

DUCK-BILLED BEAD BREAKING WEDGES WOOD HANDLED KEN35429 KEN35329

Cat. No. KEN35327 KEN35329

Model T11D T11E

Handle No. KEN35127 KEN35129

Length in. / cm 17 / 43 30 / 76

Weight lbs. / kg 4.8 / 2.2 11 / 5

Handle No. KEN35227 KEN35229

Length in. / cm 18 / 46 32 / 81

Weight lbs. / kg 4.8 / 2.2 11 / 5

FIBERGLASS HANDLED KEN35427

KEN35327

Cat. No. KEN35427 KEN35429

Model TG11D TG11E

*DENOTES SPECIAL ORDER ITEM

90

KEN-TOOL Tire & Rim Service Products HEAVY DUTY TIRE HAMMERS WOOD HANDLED KEN35104

Cat. No. KEN35321 KEN35323 KEN35325

KEN35105

Model T34 T35 T36

Handle No. KEN35119 KEN35119 KEN35119

Diameter in. / cm 17 / 43 16.5 / 42 16.5 / 42

Weight lbs. / kg 5.4 / 2.4 6.1 / 2.7 5.3 / 2.4

Handle No. KEN35219 KEN35219 KEN35219

Diameter in. / cm 18 / 46 18 / 46 18 / 46

Weight lbs. / kg 6.1 / 2.7 6.6 / 3 6.1 / 2.7

FIBERGLASS HANDLED KEN35425

KEN35423

Cat. No. *KEN35421 KEN35423 KEN35425

KEN35325

Model TG34 TG35 TG36

REPLACEMENT RUBBER HEAD KEN35323

Cat. No. KEN35104 KEN35105

KEN35321

Model T11RH T34R

Description RUBBER HEAD for T11R, TG11R, T33R, TG33R RUBBER HEAD for T34, TG34, T35, TG35, T36, TG36

TIRE & RIM SERVICE PRODUCTS

IMPACT BEAD BREAKER, VALVE BREAKER & IRON MAN LIFTING BAR Cat. No. KEN35924

Model T24B

KEN35926

T26B

KEN35936 KEN34950

T36B T950

KEN35936

Description ECONOMY BEAD BREAKER HEAVY-DUTY BEAD BREAKER VALVE BREAKER IRON MAN WHEEL LIFTING BAR

Length in. / cm 46 / 117

Weight lbs. / kg 13.5 / 6.1

50 / 127

23 / 10.4

45 / 115 58 / 147

16 / 7.3 10 / 4.5

Length in. / cm 24 / 61

Weight lbs. / kg 2.4 / 1

30 / 76

3.1 / 1.4

23.5 / 60

2.4 / 1

18 / 46 18 / 46

1.8 / 8 1.8 / 8

18 / 46 37 / 94

1.8 / 8 4.6 / 2.1

KEN34950

LOCK RING TOOLS

KEN34648

Cat. No. KEN32123

Model T23

KEN33223

T23A

KEN33224

T23B

KEN32125 KEN32127

T25 T27

KEN32128 KEN34648

T28 T48A

KEN33223 KEN33224 KEN32123 KEN32127 KEN32125

Description TRUCK LOCK RING REMOVER TRUCK LOCK RING TOOL COMBINATION RIM/RING TOOL RIM LOCK TOOL SPECIAL LOCK RING TOOL LOCK RING TOOL HEAVY-DUTY LOCK RING TOOL

*DENOTES SPECIAL ORDER ITEM

91

KEN-TOOL Tire & Rim Service Products SMALL TIRE MOUNT/DEMOUNT IRONS Used in pairs to mount/demount passenger, motorcycle, industrial, ATV and other small tires. Cat. No. KEN39805 KEN32106 KEN32109 *KEN32116

Length in. / cm 15 / 38 16.5 / 42 9 / 23 16 / 41

Model T43A T6A T9A T16A

Diameter in. / mm ¾ / 20 5/8 / 16 7/16 / 11 7/16 / 11

Weight lbs. / kg 1.8 / 8 1.5 / 7 4 / 16 7/3

Base in. cm 7 x 21.5 18 x 55 7 x 21.5 18 x 69

Weight lbs. / kg 60 / 27.2

KEN32109

TIRE INFLATION CAGES

TIRE & RIM SERVICE PRODUCTS

PORTABLE 2-BAR CAGE Cat. No. KEN36001

Model T101

Height in. / cm 41 / 104

Width in. / cm 16 / 41

*KEN36007

T101A

43.5 / 111

20.5 / 52

Model T102

Height in. / cm 43.5 / 111

Width in. / cm 20.5 / 52

72 / 32.6

4-BAR CAGE Cat. No. KEN36002 KEN36002

KEN36001

Base in. cm 31.5 x 26 80 x 66

Weight lbs. / kg 146 / 66.2

CAP NUT WRENCHES KEN30610 KEN30612

KEN30618

KEN30609

KEN30619

Cat. No. KEN30609

Model TX9

*KEN30610

TX10

KEN30612

TX12

KEN30620

TX50

KEN30618

TX200

KEN30619

TX241

Description SAE PORKCHOP™ CAP NUT WRENCH METRIC PORKCHOP™ CAP NUT WRENCH METRIC PORKCHOP™ CAP NUT WRENCH COMBINATION SAE & METRIC SAE HEAVY DUTY CAP NUT WRENCH METRIC HEAVY DUTY CAP NUT WRENCH

Size in. / cm 1½ / 41

Weight lbs. / kg .73 / .3

/ 35

.4 / .1

1½ / 41

.4 / .1

1½ / 41

1.3 / .6

1½ / 41

2.6 / 1.2

1½ / 41

2.6 / 1.2

KEN30620

BEAD-BREAKING TOOLS FOR TRUCK, FARM AND OTR

KEN33341

KEN32126

KEN34652

Cat. No. KEN33341

Model T41

KEN33342 KEN34652

T42 T52

KEN32126

T26A

Description SWAN NECK LEVERAGE BAR 30” BEAD BREAKER BEAD BREAKER LEVERAGE BAR BEAD-BREAKING TOOL/ DRIVING IRON

KEN33342

*DENOTES SPECIAL ORDER ITEM

92

Length in. / cm 30 / 76

Weight lbs. / kg 5.3 / 2.4

30 / 76 33 / 84

4.8 / 2.2 5.5 / 2.5

11¾ / 32

4.4 / 2

KEN-TOOL Tire & Rim Service Products TIRE STANDS Cat. No. KEN36015 *KEN36016

Model T115

*KEN36017

Description TRUCK TIRE CHANGING STAND EASY-LIFT BEAD SEATING STAND for 8-3/4” diameter hubs EASY-LIFT BEAD SEATING STAND for 11” diameter hubs

Weight lbs. / kg 21 / 9.5 36 / 16.4 37 / 16.8

KEN36015

PASSENGER/ LIGHT TRUCK FOUR-WAY LUG WRENCHES Model T56 T57 T59 T90

Length in. / cm 20 / 51 23 / 58 22 / 56 25 / 64

Weight lbs. / kg 4 / 1.8 4.5 / 2 4.2 / 1.9 7.2 / 3.2

Length Socket Sizes in. / cm ¾”, 13/16”, 7/8”, 17mm 20 / 51 ¾”, 13/16”, 7/8”, 17mm 18 / 46 17mm, 19mm, 21mm, 22mm 18 / 46 17mm, 19mm (¾”), 20 / 51 21mm (13/16”), 23mm (7/8”) 17mm, 19mm (¾”), 14 / 36 21mm (13/16”), 23mm (7/8”)

Weight lbs. / kg 3.4l / 1.5 3.2 / 1.5 3.2 / 1.5 3.7 / 1.7

Socket Sizes 17, 19, 21, 22mm ¾”, 13/16”, 7/8”, 15/16” ¾”, 13/16”, 7/8”, 15/16” LT 7/8” DW, 15/16”, 1”, 11/16”

TIRE & RIM SERVICE PRODUCTS

Cat. No. *KEN35656 KEN35657 KEN35659 KEN35690

KEN35657

KEN35690

ECONOMY FOUR-WAY LUG WRENCHES Cat. No. *KEN35620 *KEN35662 KEN35663 *KEN35630

Model T950 T62 T63

*KEN35635

2.6 / 1.2

KEN35663

HEAVY-DUTY TRUCK LUG WRENCHES KEN34402

KEN35695

Cat. No. KEN35695 *KEN35795 KEN35595 KEN35697

Model T95 TM95 TC95 T95A

*KEN34401 *KEN34402

TR10 TR11

Socket Sizes 11/16”, 1¼”, 1½”, 13/16” sq. 24mm, 27mm, 30mm, 33mm 1½”, 13/16sq., 30mm, 33mm 1¼”, 1½”, 13/16” sq., ¾” SERVICE ARM 1¾” HEX, 15/16” sq. HANDLE FOR KEN34401

Length in. / cm 27.5 / 70 27.5”, 70 27.5”, 70 27.5 / 70

Weight lbs. / kg 13.8 / 6.2 13.5 / 6.1 14.2 / 6.4 13.5 / 6.1

29.5”, 75 30”, 76

12.2 / 5.5 6.5 / 2.9

KEN35697

*DENOTES SPECIAL ORDER ITEM

93

GAITHER Tire Inflation Products Gaither’s Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. Gaither’s Bead Bazooka™ combines the most powerful Automatic Rapid Air Release System and easiest-to-handle tank for seating tubeless tire beads. TECH BOOSTER ASME & CE certified—5 gallon tank with manual release. Powder coated inside and out. Cat. No. GB-5Z G12912 G12913 G12914 G12916 G12917

Description TECH BOOSTER MANUAL RELEASE VALVE DOUBLE BARREL WITH LOCK NUT PRESSURE GAUGE INTAKE VALVE SAFETY POP-OFF VALVE

GB-5Z

TECH AUTO BOOSTER

TIRE & RIM SERVICE PRODUCTS

ASME & CE certified—5 gallon tank with push button release. Powder coated inside and out.

GB-5ZA

Cat. No. GB-5ZA G12912A G12913 G12914 G12916 G12917 GAVTK *GAIG12925 *GAIG12923

Description TECH AUTO BOOSTER AUTO RELEASE VALVE DOUBLE BARREL WITH LOCK NUT PRESSURE GAUGE INTAKE VALVE SAFETY POP-OFF VALVE BEAD SEATER UPGRADE KIT SWITCH VALVE NYLON HOSE

* Denotes special order item.

BEAD BAZOOKA™ – 6 LITRE ASME, CE, TUV certified—6 litre tank with Rapid Air Release System. Powder coated inside and out. Cat. No. GBB6L G12913B G12914B G12915B G12916B G12917B G12919B GGB-55

Description BEAD BAZOOKA™ SLOTTED DOUBLE BARREL WITH LOCK NUT PRESSURE GAUGE Y CONNECTION INTAKE VALVE SAFETY VALVE SWITCH VALVE WALL CLIP

GBB6L

BEAD BAZOOKA™ – XL 9 LITRE ASME, CE, TUV certified—9 litre tank with Rapid Air Release System. Powder coated inside and out. Cat. No. GBB9L G12913B G12914B G12915B G12916B G12917B G12919B GBB9L

94

Description BEAD BAZOOKA™ XL SLOTTED DOUBLE BARREL WITH LOCK NUT PRESSURE GAUGE Y CONNECTION INTAKE VALVE SAFETY VALVE SWITCH VALVE

GAITHER Tire Changing Products GAITHER TOOL-J1™ The J1 is a 2 piece system that mounts and dismounts all standard 19.5", 22.5" and 24.5" tubeless tires up to a 315/80R22.5, including those mounted on aluminum wheels without having to lift tire/wheel assembly. Cat. No. J1

Description GAITHER TOOL-J1™

PLATINUM DEMOUNT TOOL The Demounting Tool is a one piece tool that dismounts all standard 22.5" and 24.5" tubeless tires without having to lift the tire/wheel assembly. Includes Gaither’s Handle Protector. Cat. No. G12100 *GAIG12100-1 G12100-7 G12100-8

Description PLATINUM DEMOUNT TOOL HANDLE GRIP LARGE ROLLER PIN TIRE & RIM SERVICE PRODUCTS

* Denotes special order item.

BEAD SAVER SYSTEM® The Bead Saver System mounts and dismounts all tubeless truck tires from 17.5" up to 24.5", including all super singles. Cat. No. *GAI12880 *GAI12880E

A B

Description BEAD SAVER SYSTEM® BEAD SAVER DELUXE SYSTEM® Clevis Asst (A) and Extra Beadkeeper (B) included with Deluxe “E” Kit

* Denotes special order item.

RUBBERHEAD® Gaither’s Beadkeeper is the original tool for assisting in the mounting process. Coated for protecting aluminum wheels from scratches. The blue Wide Mouth Rubberhead is available for wheels with larger flanges. Cat. No. Description G12894-C RUBBERHEAD *GAI12894-CW WIDE MOUTH RUBBERHEAD GAI12894-CW

* Denotes special order item.

G12894-C

BEADKEEPER® Gaither’s Beadkeeper is the original tool for assisting in the mounting process. Made of drop-forged-steel. Cat. No. *GAI12894 G12894P

GAI12894

Description BEADKEEPER KEEPERS-ON-A-ROPE—pair connected by nylon rope

* Denotes special order item.

GAI12894

G12894-C

95

WINNTEC Bottle Jacks BOTTLE JACKS All models have a chrome main ram and a chrome pump piston. The extension screws have a pressed thread. These units can be used horizontally and vertically. Cat. No. *GAIG411500 G412000 G412001 *GAIG413000

Description 15 Ton Bottle Jack 250/9.84 490/19.29 20 Ton Bottle Jack 242/9.53 472/18.58 20 Ton Short Bottle Jack 168/6.61 285/11.22 30 Ton Bottle Jack 242/9.53 467/18.39

* Denotes special order item.

GAITHER Lifting Products

TIRE & RIM SERVICE PRODUCTS

WINNTEC Pneumatic Jacks

PNEUMATIC JACKS 20 tons. This unit includes a welded base to prolong service. Chrome main ram and aluminum air motor guarantee optimum lifetime. Air filter and air regulator connected to hose are standard. G432003 comes on a cart. Cat. No. G432020

Description 20 TON AIR/HYD. BOTTLE JACK

Min. Ht. mm/in. 245/10

Max Ht. mm/in. 470/18.5

AIR SERVICE JACK The perfect lifting choice for an extensive range of large vehicles. It carries a very wide hydraulic cylinder and three heavy duty wide adapters to give it stability when lifting loads that tend to shift. Extensively tested, certified and includes official recommendation for carrying out up to a minimum of 30,000 lifts without fail. Built in water separator. 3-year warranty. PNEUMATIC JACKS Cat. No. G432003

96

Description 20 TON AIR/HYD. BOTTLE JACK ON CART

Min. Ht. mm/in. 255/10.04

Max Ht. mm/in. 480/18.90

Cat. No. *GAIGT-3531

Description 35 TON AIR SERVICE JACK

* Denotes special order item.

Min. Ht. mm/in. 185/7.3

Max Ht. mm/in. 424/16.7

WINNTEC Floor Jacks & Jack Stands FLOOR JACK All stands have a heavy duty robot welded frame, and multiposition ductile rachet bar. 451205—12 ton sturdy, welded construction. Nylon wheels and removable handle. Delivered per pair. Cat. No. G420300 G420302 G420300-25

Description 3 TON DOUBLE PISTON GARAGE JACK 3 TON ECONOMY FLOOR JACK POWER UNIT ASSEMBLY

Min. Ht. mm/in. 105.4/4.15

Max Ht. mm/in. 490.2/19.30

130/5.12

490/19.29

G420300

FLOOR JACK 2.5 Tons. This ultra low garage jack is equipped with a rubber saddle pad and handle bumper. Includes Gaither’s handle protector. Description 2.5 TON LOW PROFILE GARAGE JACK

Min. Ht. mm/in. 85/3.35

Max Ht. mm/in. 465/18.31

TIRE & RIM SERVICE PRODUCTS

Cat. No. G422500

HANDLE PROTECTOR Protects your vehicle from unnecessary damage. Fits multiple jack manufacturers handles and popular tire tools. Cat. No. *GAIGHP-01 *GAIGHP-01Y GHP-01R

Description BLACK HANDLE PROTECTOR YELLOW HANDLE PROTECTOR RED HANDLE PROTECTOR

* Denotes special order item.

JACK STANDS All stands have a heavy duty robot welded frame, and multiposition ductile rachet bar. 451205—12 ton sturdy, welded construction. Nylon wheels and removable handle. Delivered per pair.

GAI451205

Cat. No. *GAIG450301 *GAIG451600 *GAI451205

Description 3 TON JACK STANDS 6 TON JACK STANDS 12 TON JACK STANDS WITH WHEELS

Min. Ht. mm/in. 268/10.55 394/15.51 300/11.8

Max Ht. mm/in. 425/16.73 597/23.50 460/18

* Denotes special order item.

GAIG450301

GAIG451600

97

GAITHER Bead Breaking Products SLIDE HAMMER Protect your expensive wheels from swinging hammers by breaking the bead loose with Gaither’s Slide Hammer. Includes Gaither’s handle protector. Cat. No. G12026B

Description SLIDE HAMMER

PNEUMATIC BEAD BREAKER • For agricultural, ATV, passenger and truck tires • Light weight, only 17 lbs. • Includes blow case for storage Cat. No. Description *GAIGTABB-01 PNEUMATIC BEAD BREAKER * Denotes special order item

SUPER SLICK ’EM™ TIRE & RIM SERVICE PRODUCTS

NON-FLAMMABLE!

Super Slick ’Em™ is a special non-water based lubricant that penetrates and aids in breaking the tire bead from the wheel. Non-flammable. Cat. No. *GAI12904

Description SUPER SLICK ’EM™

* Denotes special order item

WINNTEC Specialty Items O-LINE-ER Makes it easy to line up wheel studs with holes in rim for easy installation, resulting in decreased installation time and reduced risk of injury from struggling with heavy tires and rims. Cat. No. Description *GAIGTO-01TB O-LINE-ER * Denotes special order item

98

Passenger Car & Light Truck Clip-on Wheel Weights

LEAD FINISH

Since 1939, Perfect Equipment has been a leader in innovation and quality, offering a comprehensive range of wheel balance weights including traditional, non-lead, knock-on and adhesive options. Perfect Equipment is a part of the WEGMANN automotive global wheel weight platform that supplies both OEM and aftermarket customers worldwide. The company is recognized for the broadest product offerings and the highest quality standings in the industry and has become a reputable name synonymous with quality, performance and fit.

ZINC FINISH

STEEL FINISH

PERFECT WHEEL WEIGHTS PART NUMBER - DESCRIPTION - WEIGHT RANGE (when ordering, replace X.XX with required weight)

RIM PROFILE

LEAD

ZINC

STEEL

P

P – X.XX 0.25 oz. to 3 oz. / 50 per box 3.25 oz. to 6 oz. / 25 per box

PZU – X.XX 0.25 oz. to 3 oz. 50 per box

PST – X.XX 0.25 oz. to 3 oz. 50 per box

AW

AWN – X.XX 0.25 oz. to 3 oz. 25 per box

AWZ – X.XX 0.25 oz. to 3 oz. 25 per box

AWST – X.XX 0.25 oz. to 3 oz. 25 per box

MC

MCN – X.XX 0.25 oz. to 4 oz. 25 per box

MCZ – X.XX 0.25 oz. to 3 oz. 25 per box

MCST – X.XX 0.25 oz. to 3 oz. 25 per box

LHZ – X.XX 0.25 oz. to 3 oz. 25 per box

LHST – X.XX 0.25 oz. to 3 oz. 25 per box

IAWZ – X.XX 5 g to 60 g 25 per box

IAWST – X.XX 5 g to 60 g 25 per box

ENZ – X.XX 10 g to 60 g 25 per box

ENST – X.XX 10 g to 60 g 25 per box

FNZ – X.XX 5 g to 80 g 25 per box

FNST – X.XX 5 g to 60 g 25 per box

TZ – X.XX 0.25 oz. to 3 oz. 25 per box

TST – X.XX 0.25 oz. to 3 oz. 25 per box

LH

H – X.XX 0.25 oz. to 3 oz. 25 per box

IAW

IAW – X.XX 5 g to 60 g 25 per box

EN

EN – X.XX 10 g to 60 g 25 per box

FN

FN – X.XX 5 g to 80 g 25 per box

TN

TN – X.XX 0.25 oz. to 5 oz. 25 per box

WHEEL WEIGHTS, KITS & TOOLS

SERIES

99

Medium & Heavy Duty Truck Clip-on Wheel Weights

WHEEL WEIGHTS, KITS & TOOLS

LEAD FINISH

100

ZINC FINISH

PERFECT WHEEL WEIGHTS PART NUMBER - DESCRIPTION - WEIGHT RANGE (when ordering, replace X.XX with required weight)

SERIES

RIM PROFILE

LEAD

ZINC

CT

CT – X.XX 2 oz. to 8 oz. / 25 per box 10 to 12 oz. / 20 per box 14 to 16 oz. / 10 per box

17

I7 – X.XX 1 oz. to 8 oz. / 25 per box 10 to 12 oz. / 20 per box 14 to 16 oz. / 10 per box

I7Z – X.XX 1 oz. to 6 oz. 25 per box

19

I9 – X.XX 2 oz. to 8 oz. / 25 per box 10 to 12 oz. / 20 per box

n/a

LT1

LT1 – X.XX 0.5 oz. to 6 oz. 25 per box

LT1Z – X.XX 0.50 oz. to 6 oz. 25 per box

RC

RC – X.XX 2 oz. to 8 oz. / 25 per box 10 to 12 oz. / 20 per box

n/a

TAL

TAL – X.XX 2 oz. to 8 oz. 25 per box

TALZ – X.XX 1 oz. to 6 oz. 25 per box

n/a

®

QUIKSTIK Adhesive Wheel Weights Pre-cut and Pre-taped weights – no cutting, no precontouring, and no waste. Each segment is stamped with actual weight in ounces and grams. LEAD ADHESIVE WHEEL WEIGHTS – PASSENGER CAR & MOTORCYCLE APPLICATIONS

100360C

100720

200624

Cat. No. PE100360C (Chrome) PE100360S (Silver) PE100360B (Black) PE100720 PE200624 PE300360 PECL6 PECL12

Increments

Width

Size

Profile

0.25 oz. (7g) 0.25 oz. (7g) 0.25 oz. (7g) 0.25 oz. (7g) 0.25 oz. (7g) 0.5 oz. (14g) 1 oz. (28g) 2 oz. (56g)

½” ½” ½” ½” ¾” ¾” ¾” 1¼”

3 oz. 3 oz. 3 oz. 3 oz. 3 oz. 6 oz. 6 oz. 12 oz.

Standard Standard Standard Standard Low Standard Standard Standard

Box Qty. 30 30 30 60 52 30 30 8

300360

LEAD ADHESIVE WHEEL WEIGHTS – TRUCK APPLICATIONS

CL6

Cat. No. PE300360 PECL6 PECL12

CL12

Increments

Width

Size

Profile

0.5 oz. (14g) 1 oz. (28g) 2 oz. (56g)

¾” ¾” 1¼”

6 oz. 6 oz. 12 oz.

Standard Standard Standard

Box Qty. 30 30 8

200624ST

300360ST

SST300N

SSM600N

Cat. No. PESSG060N PESST300N PE200624ST PESSM600N PE300360ST

Increments

Width

Size

Profile

5g 0.25 oz. (7g) 0.25 oz. (7g) 0.25 oz. (7g) 0.5 oz. (14g)

¾” ¾” ½” 1” 1”

60g 3 oz. 3 oz. 6 oz. 6 oz.

Low Standard Low Standard Standard

Box Qty. 25 25 52 30 30

STEEL ADHESIVE WHEEL WEIGHT ROLLS Cat. No. PE200624STR PESSG7500N PESST32000N

Segments 0.25 oz. (7g) 5g 0.25 oz. (7g)

Width

Size

Profile

½” ¾” ¾”

20 lb. 16.5 lb. 20 lb.

Low Low Standard

WHEEL WEIGHTS, KITS & TOOLS

STEEL ADHESIVE WHEEL WEIGHTS

Box Qty. 1250 1500 1280

SSG060N

QUIKSTIK® STARTER KITS & STANDS Cat. No. PESK2000 PESK3000 PEQS2000 PEQS3000

Description QUIKSTIK® STARTER KIT with single roll stand QUIKSTIK® STARTER KIT with dual roll stand QUIKSTIK® STAND, holds one steel QuikStik® roll QUIKSTIK® DUAL STAND, holds two steel QuikStik® rolls

QS3000 QS2000

101

Wheel Weight Assortments LEAD WHEEL WEIGHT ASSORTMENTS Cat. No. PECWW060

CWW150

PECWW150 PECWW074 CWW060

PECWW075

Description COMPREHENSIVE HEAVY DUTY TRUCK ASSORTMENT – 28.5”w x 14”d x 22”h MASTER ASSORTMENT, a practical starting kit 35.75”w x 8.25”d x 39”h MASTER ASSORTMENT PIECES 36”w x 14.5”d x 67” h COMPREHENSIVE MASTER ASSORTMENT 36”w x 14.5”d x 67” h

Total Qty. 300 1026 2000 2625

CWW074

STEEL WHEEL WEIGHT ASSORTMENTS Cat. No. PECWW075ST

WHEEL WEIGHTS, KITS & TOOLS

CWW075ST

CWW150ST

PECWW150ST

Description NON-LEAD MASTER ASSORTMENT 36”w x 14.5”d x 67” h NON-LEAD TABLE TOP ASSORTMENT 35.75”w x 8.25”d x 39”h

Total Qty. 2325 836

ZINC WHEEL WEIGHT ASSORTMENTS Cat. No. PECWW075Z

CWW075Z

PECWW150Z CWW150Z

102

Description ZINC MASTER ASSORTMENT 36”w x 14.5”d x 67” h ZINC TABLE TOP ASSORTMENT 36”w x 8.25”d x 38” h

Total Qty. 2325 732

Premium Passenger Car & Motorcycle Wheel Weights

Hofmann Power Weight premium wheel balance weights offer a wide range of balance weights for every type of rim. Since 1949, the HOFMANN name is synonymous with precision and performance.

ZINC CLIP-ON WEIGHTS FOR PASSENGER CARS TYPE

RIM PROFILE

DESCRIPTION

MATERIAL

WEIGHT RANGE

One-piece zinc clip-on wheel weight. Universal fit for slim flange steel rims.

Zinc

5g to 60g

161

One-piece zinc clip-on wheel weight. Universal fit for standard flange steel rims.

Zinc

5g to 60g

164

One-piece zinc clip-on wheel weight. Universal fit for wide flange steel rims.

Zinc

5g to 90g

660

One-piece zinc clip-on wheel weight. Ideally suited for European aluminum rims.

Zinc

5g to 60g

661

One-piece zinc clip-on wheel weight. Ideally suited for Japanese aluminum rims.

Zinc

5g to 60g

666

One-piece zinc clip-on wheel weight. Same as Type 660, but with a shorter clip, to better fit rims with a low bead seating area.

Zinc

5g to 60g

274

Type 274 with separate B3 clip, replaces BMZ series. Produced especially for BMW and aluminum rims. BMW steel rims: Type 274 with clip B1 BMW aluminum rims: Type 274 with clip B3

Zinc

5g to 60g

260

Two piece weights with separate clip for steel and aluminum rims applied by almost all German vehicle manufacturers. Weight sizes 5 and 10 g are made of polypropylene (PP). All other sizes are made of premium zinc alloy.

Polypropylene, Zinc

5g to 60g

261

Weight with separate clip especially for Daimler steel and aluminum rims. Daimler steel rims: Weights type 261 combined with clip M1 Daimler aluminum rims: Weights type 261 combined with clip MA

Polypropylene, Zinc

5g to 60g

WHEEL WEIGHTS, KITS & TOOLS

160

ZINC ADHESIVE WEIGHTS FOR MOTORCYCLES TYPE

799

RIM PROFILE

DESCRIPTION

Dimensions: Varying lengths x 0.43” (width) Total height including adhesive tape: 0.27”

MATERIAL

WEIGHT RANGE

Zinc

5g to 30g

103

Premium Adhesive Wheel Weights & Wheel Weight Tools ZINC ADHESIVE WEIGHTS FOR PASSENGER CARS Type 360 361 380

390

Description Dimensions: Varying lengths x 0.59” (width) Total height including adhesive tape: 0.23” Dimensions: Varying lengths x 0.75” (width) Total height including adhesive tape: 0.15” Dimensions: 6.75” (length) x 0.75” (width) Total height including adhesive tape: 0.16” Available colors: white, silver, chrome, anthracite, black, blue, yellow, orange, red. Dimensions: Varying lengths x 0.59” (width) Total height including adhesive tape: 0.23” Weights of 25 g and higher feature a single segment, weights of 45 g and higher feature two segments.

Weight Range 5g to 75g 5g to 60g 60g

5g to 60g

WHEEL WEIGHTS, KITS & TOOLS

380

HOFMANN WHEEL WEIGHT TOOLS & ACCESSORIES Type Type 331 / 43

Type 336 / 1 331 / 43

336 / 1

104

Description CLIP FITTING TOOL – a simple and effective auxiliary tool for the fitting and removal of HOFMANN passenger car weights with separate clip. Opening: 0.61” and 0.75” TIRE COMPRESSION TOOL – For manual bead unseating without auxiliary energy. Allows for safe and quick application of HOFMANN passenger car weights with separate clip. Maximum opening: 13.2”

Qty. 1

1

U.W.T. Ultimate Wheel Weight Tools

U.W.T. Tools are the “ultimate tools” for removal and application of all wheel weights. With the U.W.T. design the process of removing wheel weights is now fast, easy and safe. No more struggling, pinching fingers or hands, or scratching rims. U.W.T. tools work off leverage on the weight itself, not the rim. All U.W.T. tools are high quality, made in the USA and economical with replacement parts. Best of all they are simple to use. U.W.T. WHEEL WEIGHT TOOLS

UWT2200HP

UWT1200HP

Cat. No. Description Qty. *UWT1200HP WHEEL WEIGHT HAMMER & REMOVER WITH HEEL PLATE 1 Comes with replaceable 9000-53 & 9000-73 hooks in the head and UWT1200-1 replaceable cap and 9000-4 replaceable grip. Includes 9000-3 heel plate, used for leverage to remove “clip-only” style weights with no body. UWT2200HP WHEEL WEIGHT REMOVER WITH HEEL PLATE 1 Heavy duty tool comes with replaceable double 53 & 73 hooks and replaceable 9000-4 grip. Includes 9000-3 heel plate, used for leverage to remove “clip-only” style weights with no body. * Denotes special order item.

UWT9000-4

UWT9000-2

U.W.T. REPLACEMENT PARTS Cat. No. UWT1000-3 *UWT1200-1 UWT9000-1 UWT9000-2 UWT1000-3

UWT9000-4 *UWT9000-5

UWT9000-53 UWT9000-73

UWT9000-1

UWT9000-52 UWT9000-53 UWT9000-72

UWT9000-2

UWT9000-73

Qty. 1 1 1 1 1 1 1 1 1

WHEEL WEIGHTS, KITS & TOOLS

UWT9000-52 UWT9000-72

Description REPLACEMENT PROTECTOR CAP for use with UWT1000HP REPLACEMENT PROTECTOR CAP for use with UWT1200HP REPLACEMENT SOCKET HEAD CAP SCREW, ¼ - 28 x ½ , for use with UWT1000HP, UWT1200HP, 2000 & 3000 HEEL PLATE, used with tools for leverage to remove “clip-only” weights with no body REPLACEMENT GRIP for use with UWT1000HP,UWT1200HP & UWT2200HP REPLACEMENT SOCKET HEAD CAP SCREW, ¼ - 28 x ¼ , for use with UWT2200HP #5 TWO HOLE HOOK, removes most wheel weights, for use with UWT1000HP & UWT1200HP #5 THREE HOLE HOOK, removes most wheel weights, for use with UWT2200HP & UWT2000 & 3000 #7 TWO HOLE HOOK, removes import O.E. weights (with tiny hole) and import after market wheel weights, for use with UW1200HP #7 THREE HOLE HOOK, removes import O.E. weights (with tiny hole) and import after market wheel weights, for use with UWT1000HP, UWT2200HP & UWT2000

1

* Denotes special order item.

TECH WHEEL WEIGHT HAMMERS Cat. No. 976 977 978

Description SOFT HEAD PASSENGER WHEEL WEIGHT HAMMER for installation/removal of coated wheel weights SOFT HEAD WHEEL WEIGHT HAMMER for installation/removal of coated wheel weights, wood handle PASSENGER WHEEL WEIGHT HAMMER

978

976

105

TECH Tire Changer Mount/Demount Heads *TMRTC0343-6 NYLON MOUNT AND DEMOUNT HEAD (6 PACK) O.E.M.

Part Number

Tire Changer

Accuturn Hunter

SM102529 RP6 0343B

220A, All Other Models Require 102765 Adapter TC250 • TC300 • TC325 • TC350 TC2000 • TC3250 • TC3500 TC3000 And TC 3100 Series (Require Adapter) Most Models Except R980A, R980E (Some Require Adapters)

Ranger

*TMRTCR343 RED NYLON MOUNT AND DEMOUNT HEAD (EACH) *TMRTCR343-6 RED NYLON MOUNT AND DEMOUNT HEAD (6 PACK)

TCR343

O.E.M.

Part Number

Tire Changer

Hunter

221-675-2 221-675-2-B

TC 250 • TC 300 • TC325 TC250 • TC300 • TC325 • TC350 TC2000 • TC3250 • TC3500 TC3000 And TC 3100 Series (Require Adapter)

TC0343-6

*TMRTC183061 NYLON MOUNT / DEMOUNT HEAD KIT WITH TAPERED HOLE Use With Tapered Shaft 182767 or 182812 O.E.M.

Part Number

Tire Changer

Coats

8183061

5030 • 5040 • 5050 • 5060 • 5065 6050 • 6060 • 6065 • 7050 • 7055 7060 • 7065 • 7655 • 7660 • 7665

*TMRTC182960 Coats Ranger

8182960 5150524

For R980A And R980E (Requires 5150523 Mounting Flange)

*TMRTC184432 LOW PROFILE GREY NYLON MOUNT / DEMOUNT HEAD KIT For Use With Low Profile Tires TC183061

TC184432

O.E.M.

Part Number

Tire Changer

Coats

8184432

5030 • 5040 • 5050 • 5060 • 5065 6050 • 6060 • 6065 • 7050 • 7055 7060 • 7065 • 7655 • 7660 • 7665

*TMRTC250309 NYLON MOUNT / DEMOUNT HEAD KIT WITH ROUND HOLE AUTOMOTIVE SERVICE PRODUCTS

Not For Use On Hofmann 1550, 1620 and 1625 O.E.M.

Part Number

Tire Changer

All Tool Coats

G2008401 82008402

Corghi Hofmann Sice

250309 2200981 2200981

All Models RC 1 • 5 • 10 • 15 • 20 • Early 5060 9010 • 9024 • APX90 All Rim Clamp (Optional Accessory) All Earlier Models Except 1550 • 1620 • 1625 M39, S40, S41, S42, S43, S45, S408MAXI, S435, S436, S436TC

*TMRTC450310 NYLON MOUNT / DEMOUNT HEAD WITH ROUND HOLE HEAD ONLY

TC450310

For TC 250309 Mount / Demount Head Kit

TC250309

O.E.M.

Part Number

Tire Changer

All Tool Coats

G3008403 83008403

Corghi Giuliano Hofmann Hunter

450310 3008403 8314813 RP11-8314813

Sice

8314813

All Models RC 1 • 5 • 10 • 15 • 20 • Early 5060 9010 • 9024 • APX90 All Rim Clamp (Optional Accessory) Shaft needs to be turned 180° for this Head to work All Earlier Models Except 1550 • 1620 • 1625 Fits All TCX Series (Earlier TCX500 Requires Upgrade Shaft And Adapter Kit RP11-8-114-00091) M39, S40, S41, S42, S43, S45, S408MAXI, S435, S436, S436TOP

*TMRTC14024784 NYLON MOUNT/DEMOUNT HEAD KIT O.E.M.

Part Number

Tire Changer

Accuturn Hofmann

14024784 4024784

John Bean Snap On

EAA 0247G20A EAA 0247G20A

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP 1520 • 1565 •1620 •1625 • 1625EM • 3300 • 3300EM Monty 1270, 2300, 3000, 3000GP EHP System IVE • IV • III • IIE All Models

*TMRTC20024335 NYLON MOUNT/DEMOUNT HEAD FOR TMRTC14024784 MOUNT / DEMOUNT HEAD KIT HEAD ONLY TC14024784

TC20024335

106

O.E.M.

Part Number

Tire Changer

Accuturn Hofmann

20024335 24335

John Bean Snap On

24335 24335

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP 1520 • 1565 •1620 •1625 • 1625EM • 3300 • 3300EM Monty 1270, 2300, 3000, 3000GP EHP System IVE • IV • III • IIE All Models

*Denotes special order item

TECH Tire Changer Stainless Steel Mount/Demount Heads & Inserts *TMRTC182788 STAINLESS STEEL MOUNT & DEMOUNT HEAD WITH TAPERED HOLE

TI4636 TI4096

TI11400096

O.E.M.

Part Number

Tire Changer

Coats

8182788

5030 • 5040 • 5050 • 5060 • 5065 • 5070 6050 • 6060 • 6065 • 7050 • 7055 7060 • 7065 • 7655 • 7660 • 7665

*TMRTI182961 (2 PK) – TI182963 (12 PK) PLASTIC INSERT FOR TC182788 & TC183429 STAINLESS STEEL MOUNT/DEMOUNT HEADS O.E.M.

Part Number

Tire Changer

Coats

8182961 (2Pk) 8182963 (12Pk)

RC 1 • 5 • 10 • 15 • 20 • Early 5060 5030 • 5040 • 5050 • 5060 • 5065 • 5070 6050 • 6060 • 6065 • 7050 • 7055 7060 • 7065 • 7655 • 7660 • 7665

*TMRTC101608 PLASTIC INSERT FOR SICAM TIRE CHANGER (5 PK) O.E.M.

Part Number

Tire Changer

Sicam

SM101608

Accuturn, Bosch, Sicam

*TMRTI254341A PLASTIC INSERTS FOR MOUNT & DEMOUNT HEAD (10 PK) Includes Allen Wrench TC247G15A

O.E.M.

Part Number

Tire Changer

Coats Corghi

89209611 254341A

RC 1 • 5 • 10 • 20 • 9010 • 9024 2024 • 9220 • 9824

*TMRTI20011064 PLASTIC INSERTS FOR MOUNT AND DEMOUNT HEAD Bulk – Does Not Include Pin TC101608

TC182788

O.E.M.

Part Number

Tire Changer

Accuturn Accuturn

20011064 24016079

3402 • 3450 • 3602 • 4602 5802HP • 5850HP • 5602

*TMRTI4096-10 HUNTER NOSE INSERTS FROM TI11400096 KIT FOR STEEL MOUNT HEADS (10 PK) O.E.M.

Part Number

Hunter

Tire Changer TCX Series

O.E.M.

Part Number

Hunter

Tire Changer TCX Series

*TMRTI11400096 INSERT KIT FOR HUNTER STEEL MOUNTHEADS 10 Pcs Each Of TI4096 and TI4636

TECH Jaws & Clamping Kits

O.E.M.

Part Number

Tire Changer

Hunter

RP11-8-11400096

TCX Series

*TMRTC247G15A-10 PLASTIC LONG INSERTS FOR STAINLESS MOUNT & DEMOUNT HEAD (10 PK) O.E.M.

Part Number

Tire Changer

Hofmann Snap-On

ST4024181 EAA0247G15A

All Models All Models

AUTOMOTIVE SERVICE PRODUCTS

*TMRTI4636-10 HUNTER BACK INSERTS FROM TI11400096 KIT FOR STEEL MOUNT HEADS (10 PK)

*TMRTC113125C 3-POSITION EXTENDED X-CLAMP KIT For Coats X-Models With Adjustable Carriers External (outside/in) Wheel Clamping 6" - 22" Wheels

TC113125C

Kit Includes:

TC183604

TC 182250 Position Push Buttons (4 Pc) TC 184126 3 Position X-Clamp (4 Pc)

O.E.M.

Part Number

Tire Changer

Coats

8113125C

50X • 60X • 70X (ONLY Works With Upgraded Carriage System. Does Not Work With 5030, 5040, 5045. Must Use TC182247.)

*TMRTC183604 QUILTED CLAMP SOCK (10 PK) For Jaws And Coats Rim Clamp Tire Changers O.E.M.

Part Number

Tire Changer

Coats

8183604

All Tire Changers (Except 9010 and 9024E)

*Denotes special order item

107

TECH Tire Changer Products BEAD LIFT AND COMBO TOOLS Cat. No. *TMRCT768

Description COMBO TOOL, specifically designed to mount and demount tires. Use with TI 30 Demount & TI 55 Mount Booties. *TMRTI30 LARGE WHITE DEMOUNT BOOTIE PROTECTOR for demount end of CT768/TC66679 Combo Tool *TMRTC181354 20 BEAD LIFTING TOOL for all rim clamp tire changers *TMRTI55 SMALL WHITE MOUNT BOOTIE PROTECTOR for mount end of CT768/TC66679 Combo Tool *TMRTC2505 BEAD LIFT “WAVE” TOOL BAR, specially shaped for difficult tire beads

TI30

TC181354

WL98063

TC2505

CT768

TIRE SPREADERS & ACCESSORIES Cat. No. *TMRWL98063

Description WORK LAMP FOR TIRE SPREADERS

AIR GAUGES AND LENS COVER Cat. No. Description *TMRAG107518 AIR GAUGE for Coats old style tire changers, bolts on back with clips O.E.M. Part Number Tire Changer Coats 8107518 1010 • 2020 • 2020A *TMRAG107985 AIR GAUGE for Coats tire changers, flange mount O.E.M. Part Number Tire Changer Coats 8107985 4040 • 4040A • 4040SA • 4050A

AG107985

AG107518

AUTOMOTIVE SERVICE PRODUCTS

INFLATOR HOSE ASSEMBLIES Cat. No. *TMRHA67715

HA106871

HA67715

Description INFLATOR HOSE ASSEMBLY with open end barbed style euro chuck, 52" long. All brass connectors (1/4" I.D. - 19 BSP) hose includes euro chuck. O.E.M. Part Number FMC/John Bean 67715 *TMRHA106871 INFLATOR HOSE ASSEMBLY with open end barbed style euro chuck, 60" long. All brass connectors (1/4" I.D. - 19 BSP) hose includes euro chuck O.E.M. Part Number Coats 106871

RUBBER & NYLON PADS TI851855

Cat. No. *TMRTI851855

Description LARGE PAD KIT FOR COATS TIRE CHANGERS Kit Includes: 2 – TI181851 and 1 – TI181855

TIRE LUBE SUPPLIES Cat. No. Description *TMRLB106259 LUBE BUCKET FOR TIRE CHANGERS (straight) O.E.M. Part Number Tire Changer Coats 8106259 RC 15 • 20 • 5060 • 5070 *TMRLB106572 LUBE BUCKET FOR TIRE CHANGERS (angled) O.E.M. Part Number Tire Changer Coats 8106572 4040 • 4040SA • 4050 *TMRLB66006 LUBE BUCKET FOR TIRE CHANGERS (straight) O.E.M. Part Number Accuturn 0014466 FMC / John Bean 66006 Hunter 116-35-2 LB66006

LB106259

LB106572

*Denotes special order item

108

TECH Wheel Balancer Products WHEEL BALANCER CONES & SPACER Cat. No. *TMRWB720-28 • 36 • 38 • 40 *TMRWB725-28 • 36 • 38 • 40 *TMRWB730-28 • 36 • 38 • 40 *TMRWB735-28 • 36 • 38 • 40 *TMRWB740-28 • 36 • 38 • 40 *TMRWB750-28 • 36 • 38 • 40

Description 2.95 - 3.63 RANGE 3.375 - 5.25 RANGE 3.375 - 5.88 RANGE 5.03 - 6.88 RANGE 5.875 - 7.315 RANGE SPACER / BACKING PLATE

WB750-28

WB309011

HAWEKA 40MM / 4MM PITCH PROGRAM NUT KIT WB735-28

Cat. No. *TMRWB440

Description Kit Includes: ▪ Quick Nut ▪ Clamping Hood ▪ Rubber Sleeve ▪ Pressure Ring

WHEEL BALANCER CALIPERS & GAUGE Cat. No. Description *TMRWB309011 WHEEL CALIPER measures wheel width ½" and 1" increments (up to 14") O.E.M. Part Number Accuturn 525010 Coats 8309011 John Bean 061123 Hunter 221-563-1 Snap-On EAA0247G21A

TMRWB440

WB730-28

WB720-28

WB725-28

WB740-28

CARBIDE BITS

CB6914-10

CB90488

CB433796 CB69

Cat. No. *TMRCB69

Description ROUND POSITIVE RAKE CARBIDE BIT O.E.M. Part Number Brake Lathes Ammco 40610 Application based on preference of insert Kwikway 109-6900-20 Application based on preference of insert *TMRCB6914-10 NEGATIVE RAKE CARBIDE BIT .030 RADIUS (10 PK) O.E.M. Part Number Brake Lathes Ammco 691410 1000 2002 3000 4000 4100 7000 7700 ▪ 40420 ▪ 40430 FMC/John Bean 90817 (10 Pk) 505 on the Car Hunter 221-580-2 (6 Pk) BL300 BL500 BL505 221-617-2 (24 Pk) OCL360 OCL400 OCL430MD Kwikway 109-6900-00 Not for use on a Kwikway Lathe. Kwikway Part Number for other brands reference. *TMRCB90488 POSITIVE RAKE CARBIDE BIT .20 RADIUS 15° ANGLE (10 PK) O.E.M. Part Number Brake Lathes Ammco 40410 Not for use on Ammco Lathes. Ammco Part Number for other brands reference. FMC/John Bean 90488 600 700 Hofmann W139 (5 Pk) Trucut 400 401 on the Car 201 Standard 1115 HD Brake Lathes *TMRCB433796 POSITIVE RAKE CARBIDE BIT 11° ANGLE • 1/64" RADIUS (10 PK) O.E.M. Part Number Brake Lathes Accuturn 433796 7700 8910 8911 8922 8944 8989 Ammco 40435 Not for use on Ammco Lathes. Ammco Part Number for other brands reference.

AUTOMOTIVE SERVICE PRODUCTS

TECH Brake Lathe Products

*Denotes special order item

109

TECH Brake Lathe Products BOOTS & ACCESSORIES Cat. No. *TMRSB3085

SB3085

Description SPINDLE PROTECTIVE BOOT O.E.M. Part Number Brake Lathe Ammco 3085 3000 • 4000 4100 • 7700

CS1

SILENCERS Cat. No. *TMRBS10 *TMRBS17-2 *TMRBS22-2 BS22-2

BS17-2

BS10

*TMRCS1

Description ADJUSTABLE VENTILATED ROTOR SILENCER BAND SMALL BLACK SOLID ROTOR SILENCER BAND 6-9" Diameter (2 Pack) LARGE BLACK SOLID ROTOR SILENCER BAND 10-12" Diameter (2 Pack) CLIP ON SILENCER

TECH Lift Pads LIFT PADS – 4-PIECE KITS

LP607

LP613

LP605

LP622

AUTOMOTIVE SERVICE PRODUCTS

LP603

LP615

LP617

LP618

LP610

LP609

LP620

LP608

LP619

LP606

LP600

LP601

LP621

LP602

LP612

LP616

LP623

Cat. No. Description *TMRLP600 MOLDED RUBBER PAD for Ammco, Ben Pearson, Challenger & Weaver. 3¾" x 5¾" x ¾". 3¼" between bolt holes. 4 piece kit. *TMRLP601 MOLDED RUBBER PAD for Benwil & Bishamon. 4½" x 35/8" x ¾". 17/8" (W) between bolt holes. 15/8" (L) between bolt holes. 4 piece kit. *TMRLP602 HEAVY DIE CUT MATERIAL for Challenger. VBM Round. 57/8" x 57/8" x ¼". 3" between bolt holes. 4 piece kit. *TMRLP603 ROUGH HEAVY DIE CUT MATERIAL (8 Sided) for Forward, Eagle, Gemini, Worth & American. Pad only 5" x 5" x ¼". 3¾" between bolt holes. 4 piece kit. *TMRLP605 MOLDED RUBBER PAD For Nussbaum, Phoenix & Force (old). 5" x 1". 3½" between bolt holes. 4 piece kit. *TMRLP606 HEAVY DIE CUT for flip up height extensions. Pad only 5½" x 3" x ¼". 31/8" between bolt holes. 4 piece kit. *TMRLP607 MOLDED RUBBER PAD for Western & American. Slip on, 4½" x 4" x 1". 4 piece kit. *TMRLP608 BEND PAK SQUARE, SLIP ON, MOLDED RUBBER PAD 5½" x 5½" x 1". 4 piece kit. *TMRLP609 HEAVY DUTY CUT MATERIAL FOR ROTARY SPO 12 4" x 3¼" x 1/4". 3" (W) between bolt holes. 23/8" (L) between bolt holes. 4 piece kit. *TMRLP610 MOLDED RUBBER PAD, SQUARE, for Wheeltronics, Snap-On & Ammco. 5¼" x 4½" x 1". 4 piece kit. *TMRLP612 LIFT PADS, HEAVY DIE CUT MATERIAL, for Globe. 4½" x 3/8". 4 piece kit. *TMRLP613 SOLID MOLDED RUBBER BLOCK PAD, 6" x 4¾" x 3". 4 piece kit. *TMRLP615 SOLID MOLDED RUBBER BLOCK PAD, 6¼" x 4¾" x 1½". 4 piece kit. *TMRLP616 ALM LIFT PADS MOLDED RUBBER PAD (Like OEM) 6¼" x 11/8". 4 piece kit. *TMRLP617 RUBBER PAD FOR CHALLENGER CL9 & CL10 (Like OEM) 4" x 4" x 7/16". 4 piece kit. *TMRLP618 BEND PACK SQUARE BOLT-ON MOLDED RUBBER PAD 5½" x 5½" x 1". 35/8" (W) between bolt holes. 35/8" (L) between bolt holes. 4 piece kit. *TMRLP619 MOLDED RUBBER PAD for Wheeltronics, Snap-On & Ammco round bolt on. 4.812" x 1.125". 4 piece kit. *TMRLP620 ROUND RUBBER PAD for Challenger. 5½" x ¾". 4 piece kit. *TMRLP621 MOLDED RUBBER PAD for Globe. 3" x 4½" x 1". 23/8" (W) between bolt holes. 15/8" (L) between bolt holes. 4 piece kit. *TMRLP622 MOLDED RUBBER PAD for Quality. 4¾" round. 4 piece kit. *TMRLP623 VBM ROUND HEAVY MOLDED MATERIAL for Challenger. 3/8" Round. 3" between bolt holes. 4 piece kit. *Denotes special order item

ADDITIONAL LIFT PADS, UPRIGHTS & EXTENSIONS AVAILABLE.

110

TECH Automotive Tire Service BULGE STYLE ACORN LUG NUTS

TI155

Cat. No. Description *TMRTI145 BULGE STYLE ACORN CHROME LUG NUT *TMRTI146 BULGE STYLE ACORN CHROME LUG NUT *TMRTI147 BULGE STYLE ACORN CHROME LUG NUT *TMRTI148 BULGE STYLE ACORN CHROME LUG NUT *TMRTI149 BULGE STYLE ACORN CHROME LUG NUT *TMRTI150 BULGE STYLE ACORN CHROME LUG NUT *TMRTI310 BULGE STYLE ACORN CHROME LUG NUT *TMRTI151 LONG BULGE STYLE ACORN CHROME LUG NUT *TMRTI152 LONG BULGE STYLE ACORN CHROME LUG NUT *TMRTI153 LONG BULGE STYLE ACORN CHROME LUG NUT *TMRTI154 LONG BULGE STYLE ACORN CHROME LUG NUT *TMRTI155 LONG BULGE STYLE ACORN CHROME LUG NUT

TI147

Thread Size 7/16"

Hex ¾"

Height 1.38”

½"

¾"

1.38”

12mm - 1.25

¾"

1.38”

12mm - 1.50

¾"

1.38”

14mm - 1.50

¾"

1.38”

12mm - 1.75

¾"

1.38”

12mm - 1.50

¾"

1.01”

½"

13/16"

1.75”

12mm - 1.50

13/16"

1.75”

12mm - 1.75

13/16"

1.75”

14mm - 1.50

13/16"

1.75”

14mm - 2.00

13/16"

1.75”

ELECTRICAL CABLE TIES Description BLACK CABLE TIE 4" 18 lb. BLACK CABLE TIE 6" 40 lb. BLACK CABLE TIE 8" 50 lb. BLACK THIN CABLE TIE 8" 18 lb. BLACK WIDE CABLE TIE 8" 120 lb. BLACK CABLE TIE 11" 50 lb. BLACK CABLE TIE 14" 50 lb. BLACK MOUNTING CABLE TIE 14" 50 lb. BLACK WIDE CABLE TIE 14" 120 lb. BLACK EXTRA WIDE CABLE TIE 17" 175 lb. BLACK EXTRA WIDE CABLE TIE 24" 175 lb. BLACK EXTRA WIDE CABLE TIE 36" 175 lb. BLACK EXTRA WIDE CABLE TIE 48" 175 lb. NATURAL CABLE TIE 4" 18 lb. NATURAL CABLE TIE 6" 40 lb. NATURAL CABLE TIE 8" 50 lb. NATURAL CABLE TIE 11" 50 lb. NATURAL CABLE TIE 14" 50 lb. NATURAL WIDE CABLE TIE 14" 120 lb. NATURAL EXTRA WIDE CABLE TIE 17" 175 lb. NATURAL CABLE TIE 24" 175 lb. NATURAL CABLE TIE 36" 175 lb.

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 50 50 50 100 100 100 100 100 100 100 50 50

AUTOMOTIVE SERVICE PRODUCTS

Cat. No. *TMRBL4 *TMRBL6 *TMRBL8 *TMRBL8-18 *TMRBL8W *TMRBL11 *TMRBL14 *TMRBL14MT *TMRBL14W *TMRBL17W *TMRBL24 *TMRBL36 *TMRBL48 *TMRCL4 *TMRCL6 *TMRCL8 *TMRCL11 *TMRCL14 *TMRCL14W *TMRCL17W *TMRCL24 *TMRCL36

SPARE TIRE REMOVAL KIT & KEYS Cat. No. *TMRTI8435

TI8435

Description SPARE TIRE REMOVAL KIT, includes: TI8410 - Blue Pin Head TI8430 - Green 12mm Square Head TI8460 - Black Slotted Square Head TI8400 - Red Flat Head TI8420 - Yellow Hex Head TI8440 - Orange Std. Square Head TI8480 - Purple 3/8" Square Head TI8470 - Hanging Rack

*Denotes special order item

111

TECH Abrasives ALUMINUM OXIDE DISC – SANDPAPER Cat. No. *TMRMI215-100 *TMRMI225-100 *TMRMI235-100 *TMRMI245-100 *TMRMI315-100 *TMRMI325-100 *TMRMI335-100 *TMRMI345-100

Description 2" ALUMINUM OXIDE DISC - 36 GRIT 2" ALUMINUM OXIDE DISC - 50 GRIT 2" ALUMINUM OXIDE DISC - 80 GRIT 2" ALUMINUM OXIDE DISC - 120 GRIT 3" ALUMINUM OXIDE DISC - 36 GRIT 3" ALUMINUM OXIDE DISC - 50 GRIT 3" ALUMINUM OXIDE DISC - 80 GRIT 3" ALUMINUM OXIDE DISC - 120 GRIT

Pkg. Qty. 100 100 100 100 100 100 100 100

SURFACE CONDITIONING DISCS – RESIN FIBER Cat. No. *TMRMI197-100 *TMRMI297-100 *TMRMI397-100 *TMRMI17-100 *TMRMI27-100 *TMRMI37-100

Description 2" SURFACE CONDITIONING DISC coarse grit, brown 2" SURFACE CONDITIONING DISC medium grit, maroon 2" SURFACE CONDITIONING DISC fine grit, blue 3" SURFACE CONDITIONING DISC coarse grit, brown 3" SURFACE CONDITIONING DISC medium grit, maroon 3" SURFACE CONDITIONING DISC fine grit, blue

Pkg. Qty. 100 100 100 100 100 100

BLUE ZIRCONIA DISCS

AUTOMOTIVE SERVICE PRODUCTS

Cat. No. *TMRMI202-50 *TMRMI203-50 *TMRMI204-50 *TMRMI302-25 *TMRMI303-25 *TMRMI304-25

Description 2" BLUE ZIRCONIA DISC - 24 GRIT 2" BLUE ZIRCONIA DISC - 36 GRIT 2" BLUE ZIRCONIA DISC - 50 GRIT 3" BLUE ZIRCONIA DISC - 24 GRIT 3" BLUE ZIRCONIA DISC - 36 GRIT 3" BLUE ZIRCONIA DISC - 50 GRIT

GREEN ZIRCONIA DISCS Cat. No. *TMRMI305-50 *TMRMI306-50 *TMRMI307-50 *TMRMI308-25 *TMRMI309-25 *TMRMI310-25

Description 2" GREEN ZIRCONIA DISC - 24 GRIT 2" GREEN ZIRCONIA DISC - 36 GRIT 2" GREEN ZIRCONIA DISC - 50 GRIT 3" GREEN ZIRCONIA DISC - 24 GRIT 3" GREEN ZIRCONIA DISC - 36 GRIT 3" GREEN ZIRCONIA DISC - 50 GRIT

ARBORS Cat. No. *TMRMI20 *TMRMI200

Description 3" ARBOR ROLOC TYPE HOLDER 2" ARBOR ROLOC TYPE HOLDER

*Denotes special order item MI200

112

Pkg. Qty. 50 50 50 25 25 25

Pkg. Qty. 50 50 50 25 25 25

Regroovers, Blades & Accessories TECH REGROOVERS, BLADES & ACCESSORIES Cat. No. S145A (110V) S145A

S145B (220V) BLADES

Description REGROOVER for cutting tread design into repaired tire. Complete with heat adjustable transformer for reliable cutting speed and control, 110 volts. Same as S145A except 220 volts. S145A & S145B REGROOVER BLADES S145/R-1 ROUND 5/64”, 2mm cutting width S145/R-2 ROUND 1/8”, 3mm cutting width S145/R-3 ROUND 13/64”, 5mm cutting width S145/R-4 ROUND 9/32”, 7mm cutting width S145/R-5 ROUND 23/64”, 9mm cutting width S145/W-1 WIDE 5/64”, 2mm cutting width S145/W-2 WIDE 5/32”, 4mm cutting width S145/W-3 WIDE 1/4”, 6mm cutting width S145/W-4 WIDE 5/16”, 8mm cutting width S145/W-5 WIDE 13/32”, 11mm cutting width S145/W-6 WIDE 7/8”, 22mm cutting width

Repair parts available for S145A and S145B. NOTE: Safety feature, S145 Regroovers are pressure activated. S145/W-6

S145/R-5

RILLFIT REGROOVERS, BLADES & ACCESSORIES

S146A

S146/W-6

S146/R-5

Description RILLFIT REGROOVER, 110 volt RILLFIT REGROOVER, 220 volt ROUND BLADE, 5/64”, 2mm cutting width, 20/pk. ROUND BLADE, 1/8”, 3mm cutting width, 20/pk. ROUND BLADE, 13/64”, 5mm cutting width, 20/pk. ROUND BLADE, 9/32”, 7mm cutting width, 20/pk. ROUND BLADE, 23/64”, 9mm cutting width, 20/pk. ANGLE BLADE, 5/64”, 2mm cutting width, 20/pk. ANGLE BLADE, 5/32”, 4mm cutting width, 20/pk. ANGLE BLADE, 1/4”, 6mm cutting width, 20/pk. ANGLE BLADE, 5/16”, 8mm cutting width, 20/pk. ANGLE BLADE, 13/32” cutting width, 20/pk. ANGLE BLADE, 7/8”, 22mm cutting width, 20/pk.

REGROOVERS, BLADES & ACCESSORIES

Cat. No. S146A S146B S146/R-1 S146/R-2 S146/R-3 S146/R-4 S146/R-5 S146/W-1 S146/W-2 S146/W-3 S146/W-4 S146/W-5 S146/W-6

113

TECH Training & Support Materials

Tech offers an extensive array of step-by-step “How to Repair” information. Our “How to Repair” manuals are designed to simply and effectively demonstrate correct, proven methods to properly repair all types of tires. Tech wall charts clearly and quickly communicate “How to Repair” procedures and provide detailed instructions on selecting the correct repair unit for the job. Repair Hot Line for continental United States and Canada, 1-800-433-TECH or 1-800-336-TECH.

TECH “HOW TO REPAIR” MANUALS Cat. No. RM-1 RM-2 RM-4 RM-5 RDVD1

Description TUBE REPAIR VALVE REPAIR 250UL & 251UL UNI-SEAL ULTRA REPAIR on a Speed Rated Tire 2-PIECE REPAIR UNI-SEAL & TWO-PIECE NAILHOLE REPAIR DVD

RM-1 through RM-5 also available in Spanish. Add suffix “S” to catalog number when ordering. Example: RM-1S.

TECH WALL CHARTS 2PC

TRAINING MATERIALS & INFORMATION

BP

120

VHSC

CT

PTC

Cat. No. Title BP BP Bias Ply Size of Injury CT Centech Size of Injury/Repair Selection Chart CTOR Centech Off Road Repair Selection Chart PTC Uni-Seal Ultra Repair Chart 2PC Two-Piece Wall Chart TOR TOR Wall Chart

CTOR

Tech Valve Hardware Selection Chart

Description Large wall chart contains complete information on proper selection of BP bias ply repair units Large wall chart contains complete information on selecting the proper Centech radial repair units for passenger, light truck, medium truck & tractor tires Large wall chart contains complete information on selecting the proper Centech radial OTR repair units Large wall chart featuring the application of Uni-Seal Ultras in passenger, light truck and truck tires. Large wall chart featuring the application of Two-Piece style repairs in passenger, light truck and truck tires. Large wall chart contains complete information on selecting the proper Tech TOR repair unit for off-road tires. Large wall chart contains complete information on selecting proper valve hardware for passenger, light truck and medium truck applications.

TECH INTERNATIONAL Authorized Tire Repair Technician Training Programs

H

TECH H

NS

1 93 9 H

H

IO

TE

E DOC UTRU M

H

M

JO

H

H

Q

TY QUOMODO.

Teach Each Customer How

UNIVERS CHUE EMPTORE I

H TOWN, O

Profit From Tire Repair Education Tech International began factory training of our sales force and customers in 1970. Today, Tech offers specific tire repair courses that incorporate the latest tire repair techniques recommended by the major tire manufacturers, as well as the most cost effective methods of tire repairing. All of these courses include classroom instruction on today’s most current construction, tire size and inspection information. Tech’s Authorized Repair Technician Programs are available at Tech’s Corporate Headquarters, at one of our regional training centers around the world, or at your location. Training at any of Tech’s training facilities is highly recommended because of the superior hands-on training. What good does specialized training do? It lets you... • Improve customer satisfaction • Decrease repair liability • Make proper tire repairs • Decrease costs • Increase profitability

Automotive Tire Dealer Seminar

Commercial Tire Service Seminar This two day seminar is the general tire repair course covering construction, inspection and basic repair of commercial truck tires. The repair methods taught in this course are the most current industry recommended procedures utilizing both one-piece and two-piece style nailhole repairs. The second portion of the course includes the Tire Industry Association’s (TIA) Basic CTS program. This classroom training covers OSHA Regulation 29CFR Part 1910.177 servicing single piece and multi-piece rim wheels. Students who meet the requirements will receive the TIA Basic CTS certificate and Tech Authorized Nailhole Repair Technician certificate and arm patches.

TRAINING MATERIALS & INFORMATION

This two day seminar is designed specifically for automotive technicians with the focus on passenger tire service. Tech stresses the importance of proper repair procedures for standard passenger, high performance and run-flat tires. The second portion of the seminar includes the Tire Industry Association (TIA) Basic ATS Program. Basic ATS meets the need for documented training of new and experienced automotive technicians. This section includes basic principles of tires and wheels, mounting and demounting using center post and rim clamp machines, balancing, using a lift, and proper torque procedures. The final portion of the seminar covers the servicing of tires with Tire Pressure Monitoring Systems (TPMS). Students who meet Tech’s hands-on requirements and pass the written exam will receive the Tech Authorized Nailhole Repair Technician certificate and arm patches. Basic ATS training certificates will be issued from TIA for those who pass the written TIA exam.

121

TECH INTERNATIONAL Authorized Tire Repair Technician Training Programs OTR Section Repair Seminar The OTR tire repair course is a specialty course conducted at Tech’s Johnstown, Ohio training center. In this course, the student learns the latest techniques used in the section repair of bias and radial off road tires. The course also covers the latest OTR tire construction, tire storage requirements and tire inspection techniques. All students are required to complete hands-on demonstrations and a written exam. When the attending students pass the written exam and complete all of the hands-on requirements, they will receive Tech’s Authorized OTR Tire Repair Technician certificate and arm patches.

Commercial & Ag Tire Repair Seminar This two day seminar covers the proper repair of passenger, light , medium, and heavy truck tires, and agricultural tires. Over the course of two days, the participants will learn about tube repairs, Permacure and Flow Seal inserts, and proper nail hole repair methods in passenger through heavy truck tires. Additional larger repairs in Truck and agricultural tires will be explained and demonstrated. All students are required to complete hands-on demonstrations and a written exam. Students who meet Tech’s hands-on requirements and pass the written exam will receive the Tech Authorized Nailhole Repair Technician certificate and arm patches.

TRAINING MATERIALS & INFORMATION

On-Site Nail Hole Repair Training Tech International has a knowledgeable training staff, along with fully trained regional managers and a network of Tech distributors to satisfy all of your training needs. Tech has conducted training programs to train and authorize our entire distributor network. In the United States and Canada, nailhole repair training courses are also conducted by our well-trained distributors. We have over 40 years experience in training repair personnel using the latest tire repair techniques. Please contact Tech International or your local Tech Distributor for a factory training course schedule or to set up an in-house training seminar.

For more information, contact the Training Department at Tech International Phone (800) 433-8324 | (800) 336-8324 | (740) 967-9015 Fax (740) 967-7203 | Visit our website at: www.tech-international.com

122

NOTES

123

Are You Getting Your Share of TPMS Business? If you aren't, you're missing out on a huge revenue opportunity. The U.S. government requires that all passenger cars, light trucks and vans be equipped with a Tire Pressure Monitoring System, starting in model year 2008. Due to a phase-in of the requirements, 20 percent of model year 2006 and 70 percent of model year 2007 vehicles are equipped with TPMS. That’s a lot of TPMS valves on the road! It is estimated that 14,000,000 sensors will begin to fail this year due to worn out battery life. TRUST TECH to help make sure you’re educated and equipped to take advantage of this service revenue opportunity. Tech carries a full line of TPMS sensors, service packs, workshop and diagnostic tools, and TPMS starter kits tailored to suit YOUR business.

Go directly to our web site: www.techtpms.com or click the TPMS links on www.techtirerepairs.com

“We turn this off"

TRUST TECH 124

TECH EUROPE 15 Ballinderry Road Lisburn Co. Antrim BT28 2SA Northern Ireland, U.K. TEL: 44-2892-665721 FAX: 44-2892-601611 [email protected]

TECH EUROPE BVBA Bremheidelaan 6 2300 Turnhout Belgium TEL: 32-1-442-3103 FAX: 32-1-441-7003 Mobile: 32-4772-066-56 [email protected]

TECH MEXICO MOBILE: 786-493-8260 [email protected]

TECH INTERNATIONAL (SHANGHAI) CO., LTD. 1536 Rongle(E) Road Songjiang Industrial Zone Shanghai P.R. China 201613 TEL: 86-21-5774-0748-3200 FAX: 86-21-5774-5560 www.tech-cn.com

NIPPON TECH, INC. YCC Takanawa Bldg. 5F, 2-21-43 Takanawa, Minato-Ku Tokyo 108-0074 Japan TEL: 81-3-5462-7321 FAX: 81-3-5462-7323 www.tech-jp.co.jp

TECH CANADA TEL: 647-526-0843 [email protected]

TECH LATIN AMERICA Av. Boyacá No. 55-63 Bogota D.C. Colombia TEL: 57-1-416-8666 FAX: 57-1-263-0689 www.techlatinamerica.com

TECH OCEANIA 67 B Munson St. Mosman 2088 NSW Australia TEL: 61-2-9969-1096 MOBILE: 61-4-1701-8625 www.tech-international.com

TECH ASIA PACIFIC 36th Floor, Menara Maxis Kuala Lumpur City Centre 50088 Kuala Lumpur Malaysia TEL: 601-2319-4040 FAX: 603-5882-5680 [email protected]

TECH INTERNATIONAL 200 East Coshocton Street Johnstown, OH 43031 TEL: 740-967-9015 FAX: 740-967-1039 www.tech-international.com

A

TC2 2nd Printing

43813 04439

6

© Copyright 2013, Tech International Printed in USA